November 2018 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Nov 2 10:09:06 CET 2018
Ending: Fri Nov 30 16:31:41 CET 2018
Messages: 617

• [pve-devel] [PATCH container v2] Close #1234: pct: implement rescan   Alwin Antreich
• [pve-devel] [PATCH storage/manager/container 0/3] map_volume and unmap_volume   Alwin Antreich
• [pve-devel] [PATCH manager 1/1] add_storage creates only one ceph storage entry   Alwin Antreich
• [pve-devel] [PATCH container 1/1] call map_volume before using volumes.   Alwin Antreich
• [pve-devel] [PATCH storage 1/1] implement map_volume and unmap_volume   Alwin Antreich
• [pve-devel] [PATCH manager v2] add_storage creates only one ceph storage entry   Alwin Antreich
• [pve-devel] [PATCH container v3] Close #1234: pct: implement rescan   Alwin Antreich
• [pve-devel] [PATCH manager 0/2] MDS create/destroy & CephFS create   Alwin Antreich
• [pve-devel] [PATCH manager 1/2] Create/destroy Ceph MDS   Alwin Antreich
• [pve-devel] [PATCH manager 2/2] Add createcephfs to pveceph   Alwin Antreich
• [pve-devel] [PATCH manager] Add wipe_disk to createosd   Alwin Antreich
• [pve-devel] [PATCH manager v2] Factoring the wipe_disk out into CephTools   Alwin Antreich
• [pve-devel] [PATCH manager] Raise the default pg_num to 128   Alwin Antreich
• [pve-devel] [PATCH docs] Update the default PG number to 128   Alwin Antreich
• [pve-devel] [PATCH docs] pveceph: add initial CephFS documentation   Alwin Antreich
• [pve-devel] [PATCH proxmox-ve] Add a purge proxmox-ve to the warning message   Alwin Antreich
• [pve-devel] [PATCH firewall 2/2] fix #2004: do not allow backwards ranges   Alwin Antreich
• [pve-devel] [common] minor updates to README.dev   OGUZ BEKTAS
• [pve-devel] [docs] minor improvements to documentation   Oguz Bektas
• [pve-devel] [lxc] fix typo in package description   Oguz Bektas
• [pve-devel] [pmg-api] fixed some typos in PMG/Config.pm   Oguz Bektas
• [pve-devel] [aab] change `pacman -Sy` to `-Syy`, cleanup whitespace   Oguz Bektas
• [pve-devel] [PATCH v2 aab] change `pacman -Sy` to `-Syy`, cleanup whitespace   Oguz Bektas
• [pve-devel] [PATCH proxmox-i18n] improve turkish translation   Oguz Bektas
• [pve-devel] [PATCH common] add new builddeps to README.dev   Oguz Bektas
• [pve-devel] [PATCH docs] minor improvements to installation   Oguz Bektas
• [pve-devel] [PATCH proxmox-i18n] update turkish translation   Oguz Bektas
• [pve-devel] [PATCH installer] change last button to 'Install'   Oguz Bektas
• [pve-devel] [PATCH installer 2/2] minor instruction change in html during install   Oguz Bektas
• [pve-devel] [PATCH v2 installer 2/2] minor instruction change in html   Oguz Bektas
• [pve-devel] [PATCH common] update builddeps in readme   Oguz Bektas
• [pve-devel] [PATCH installer] implement previous button   Oguz Bektas
• [pve-devel] [PATCH docs v2] pveceph: add initial CephFS documentation   Oğuz Bektaş
• [pve-devel] [PATCH qemu-server v3 1/3] add qmeventd   Wolfgang Bumiller
• [pve-devel] [PATCH qemu-server v3 1/3] add qmeventd   Wolfgang Bumiller
• [pve-devel] [PATCH qemu-server v3 1/3] add qmeventd   Wolfgang Bumiller
• [pve-devel] [PATCH qemu-server v4 1/3] add qmeventd   Wolfgang Bumiller
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Wolfgang Bumiller
• [pve-devel] applied: [PATCH container] fix #1808: readonly mount source disk   Wolfgang Bumiller
• [pve-devel] [PATCH v2 qemu-server 00/12] initial arm support   Wolfgang Bumiller
• [pve-devel] [PATCH v2 qemu-server 01/12] fix and simplify kvm_version()   Wolfgang Bumiller
• [pve-devel] [PATCH v2 qemu-server 02/12] add 'arch' vm configuration   Wolfgang Bumiller
• [pve-devel] [PATCH v2 qemu-server 03/12] create_vm: don't add vmgenid for ARM machines by default   Wolfgang Bumiller
• [pve-devel] [PATCH v2 qemu-server 04/12] use AAVMF for arm   Wolfgang Bumiller
• [pve-devel] [PATCH v2 qemu-server 05/12] use qemu-system-aarch64 for arm machines   Wolfgang Bumiller
• [pve-devel] [PATCH v2 qemu-server 06/12] move cpu option creation into separate sub   Wolfgang Bumiller
• [pve-devel] [PATCH v2 qemu-server 07/12] use cortex-a57 as cpu for arm emulation for now...   Wolfgang Bumiller
• [pve-devel] [PATCH v2 qemu-server 08/12] only use vhost-net for native kvm machines   Wolfgang Bumiller
• [pve-devel] [PATCH v2 qemu-server 09/12] arm: use UART for serial0 instead of a separate device   Wolfgang Bumiller
• [pve-devel] [PATCH v2 qemu-server 10/12] arm: pci addressing, keyboard and ehci controller   Wolfgang Bumiller
• [pve-devel] [PATCH v2 qemu-server 11/12] don't use amd64-specific cpu options on arm   Wolfgang Bumiller
• [pve-devel] [PATCH v2 qemu-server 12/12] arm: use virtio gpu by default   Wolfgang Bumiller
• [pve-devel] applied: [PATCH container v3] Close #1234: pct: implement rescan   Wolfgang Bumiller
• [pve-devel] applied: [PATCH qemu-server/manager/docs] fix #1959: remove cloud-init SLAAC option   Wolfgang Bumiller
• [pve-devel] [PATCH qemu-server 1/2] Fix #1924: add snapshot parameter   Wolfgang Bumiller
• [pve-devel] applied: [PATCH docs v5 1/1] add qmeventd manpage   Wolfgang Bumiller
• [pve-devel] applied: [PATCH qemu-server v6 0/3] add qmeventd   Wolfgang Bumiller
• [pve-devel] applied: [PATCH docs] fix #1138: installation: note how one can progress with keyboard only   Wolfgang Bumiller
• [pve-devel] applied: [PATCH storage] fix #862: do not resolve portal adress on storage add   Wolfgang Bumiller
• [pve-devel] applied: [PATCH storage] LVM: lock on volume_resize   Wolfgang Bumiller
• [pve-devel] [PATCH qemu-server 2/3] PCI.pm: improve and extend lspci   Wolfgang Bumiller
• [pve-devel] [PATCH storage] plugin loader: add an APIAGE   Wolfgang Bumiller
• [pve-devel] [PATCH qemu-server v6 1/3] add qmeventd   Wolfgang Bumiller
• [pve-devel] applied: [PATCH common] tools: template_replace: esacpe braces   Wolfgang Bumiller
• [pve-devel] applied: [PATCH common 1/2] fork_worker: refactor child exit   Wolfgang Bumiller
• [pve-devel] applied: [PATCH zsync 1/2] fix #1587: sync: check if job state is defined   Wolfgang Bumiller
• [pve-devel] applied: [PATCH common] Tools.pm: do not ignore "0" in split_list   Wolfgang Bumiller
• [pve-devel] [PATCH manager 2/8] api/Ceph: cleanup module usage   Wolfgang Bumiller
• [pve-devel] applied: [PATCH v2 pve-common] Network : veth pair : fix mtu   Wolfgang Bumiller
• [pve-devel] [PATCH manager 2/6 v2] Scan.pm: add mdev scan api call   Wolfgang Bumiller
• [pve-devel] applied: [PATCH storage] pvesm: add scan subcommands   Wolfgang Bumiller
• [pve-devel] [PATCH manager v3 0/5] CephFS/MDS server side implementation and cleanups   Wolfgang Bumiller
• [pve-devel] applied: [PATCH v2 aab] change `pacman -Sy` to `-Syy`, cleanup whitespace   Wolfgang Bumiller
• [pve-devel] partially applied: [PATCH manager v3 0/5] CephFS/MDS server side implementation and cleanups   Wolfgang Bumiller
• [pve-devel] applied: [PATCH storage] cephfs: tell systemd that mount mount requires network   Wolfgang Bumiller
• [pve-devel] pve-firewall : nftables ?   Wolfgang Bumiller
• [pve-devel] applied: [PATCH manager v2] fix #1430: ceph init: allow to specify separate cluster network   Wolfgang Bumiller
• [pve-devel] pve-firewall : nftables ?   Wolfgang Bumiller
• [pve-devel] pve-firewall : nftables ?   Wolfgang Bumiller
• [pve-devel] [PATCH container] add features:fuse   Wolfgang Bumiller
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Nick Chevsky
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Nick Chevsky
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Nick Chevsky
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Nick Chevsky
• [pve-devel] [PATCH v2 pve-manager] Add "SSD emulation" property to IDE, SATA, and SCSI drives   Nick Chevsky
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Nick Chevsky
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Nick Chevsky
• [pve-devel] [PATCH pve-docs] Document new SSD emulation feature   Nick Chevsky
• [pve-devel] [PATCH changeme] Enable "Discard" option for IDE and SATA drives   Nick Chevsky
• [pve-devel] [PATCH changeme] Enable "Discard" option for IDE and SATA drives   Nick Chevsky
• [pve-devel] [PATCH pve-docs] Remove SCSI exclusivity from "Discard" drive option   Nick Chevsky
• [pve-devel] [PATCH manager v3] gui: expose lxc features   Dominik Csapak
• [pve-devel] [PATCH docs/qemu-server v4] add qmeventd   Dominik Csapak
• [pve-devel] [PATCH docs v4 1/1] add qmeventd manpage   Dominik Csapak
• [pve-devel] [PATCH qemu-server v4 1/3] add qmeventd   Dominik Csapak
• [pve-devel] [PATCH qemu-server v4 2/3] add 'qm cleanup'   Dominik Csapak
• [pve-devel] [PATCH qemu-server v4 3/3] use qmeventd to execute qm cleanup   Dominik Csapak
• [pve-devel] [PATCH v2 storage 1/3] close #1949: storage zfs: changed zpool command parser   Dominik Csapak
• [pve-devel] [PATCH manager 1/4] node zfs: added check for undefined & new case AVAIL   Dominik Csapak
• [pve-devel] [PATCH manager 2/4] node zfs: added new component to display additional zfs details   Dominik Csapak
• [pve-devel] [PATCH v2 storage 1/3] close #1949: storage zfs: changed zpool command parser   Dominik Csapak
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Dominik Csapak
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Dominik Csapak
• [pve-devel] [PATCH manager] remove unnecessary sort function in HardwareView.js   Dominik Csapak
• [pve-devel] [PATCH manager 1/2] fix sorting for unused disks in HardwareView.js   Dominik Csapak
• [pve-devel] [PATCH manager 1/2] fix sorting for unused disks in HardwareView.js   Dominik Csapak
• [pve-devel] [PATCH qemu-server/manager] make vga memory configurable   Dominik Csapak
• [pve-devel] [PATCH qemu-server 1/1] fix #1952: make vga memory configurable   Dominik Csapak
• [pve-devel] [PATCH manager 1/1] gui: let users edit the vga memory   Dominik Csapak
• [pve-devel] applied: [PATCH manager] lxc/Features: not that keyctl is uneccesarry for priviledged   Dominik Csapak
• [pve-devel] [PATCH docs/qemu-server v5] add qmeventd   Dominik Csapak
• [pve-devel] [PATCH docs v5 1/1] add qmeventd manpage   Dominik Csapak
• [pve-devel] [PATCH qemu-server v5 1/3] add qmeventd   Dominik Csapak
• [pve-devel] [PATCH qemu-server v5 2/3] add 'qm cleanup'   Dominik Csapak
• [pve-devel] [PATCH qemu-server v5 3/3] use qmeventd to execute qm cleanup   Dominik Csapak
• [pve-devel] [PATCH qemu-server v5 3/3] use qmeventd to execute qm cleanup   Dominik Csapak
• [pve-devel] [PATCH qemu-server/manager v2] make vga memory configurable   Dominik Csapak
• [pve-devel] [PATCH qemu-server 1/1 v2] fix #1952: make vga memory configurable   Dominik Csapak
• [pve-devel] [PATCH manager 1/1 v2] gui: let users edit the vga memory   Dominik Csapak
• [pve-devel] [PATCH qemu-server] check for $vga->{type} instead of $vga   Dominik Csapak
• [pve-devel] [PATCH docs] add documentation for display types and memory configuration   Dominik Csapak
• [pve-devel] [PATCH firewall 1/2] Fix #1971: display firewall rule properties   Dominik Csapak
• [pve-devel] [PATCH docs] add documentation for pci passthrough and sr-iov   Dominik Csapak
• [pve-devel] [PATCH docs/qemu-server] add mediated devices/vgpu support   Dominik Csapak
• [pve-devel] [PATCH docs 1/2] remove 4th section and fix typos   Dominik Csapak
• [pve-devel] [PATCH docs 2/2] add documentation for mediated devices   Dominik Csapak
• [pve-devel] [PATCH qemu-server 1/2] move pci related subs to QemuServer/PCI.pm   Dominik Csapak
• [pve-devel] [PATCH qemu-server 2/2] add mediated devices support   Dominik Csapak
• [pve-devel] [PATCH docs 1/2] remove 4th section and fix typos   Dominik Csapak
• [pve-devel] [PATCH qemu-server v2 0/5] add mediated devices/vgpu support   Dominik Csapak
• [pve-devel] [PATCH qemu-server v2 1/5] move pci related subs to QemuServer/PCI.pm   Dominik Csapak
• [pve-devel] [PATCH qemu-server v2 2/5] refactor pci regex   Dominik Csapak
• [pve-devel] [PATCH qemu-server v2 3/5] implement filter in lspci   Dominik Csapak
• [pve-devel] [PATCH qemu-server v2 4/5] implement iommu check   Dominik Csapak
• [pve-devel] [PATCH qemu-server v2 5/5] add mediated devices support   Dominik Csapak
• [pve-devel] [PATCH qemu-server 1/7] api2 : migrate_vm : add migration_type "external"   Dominik Csapak
• [pve-devel] [PATCH qemu-server v6 0/3] add qmeventd   Dominik Csapak
• [pve-devel] [PATCH qemu-server v6 1/3] add qmeventd   Dominik Csapak
• [pve-devel] [PATCH qemu-server v6 2/3] add 'qm cleanup'   Dominik Csapak
• [pve-devel] [PATCH qemu-server v6 3/3] use qmeventd to execute qm cleanup   Dominik Csapak
• [pve-devel] [PATCH 0/2] return cluster name on successful login if available   Dominik Csapak
• [pve-devel] [PATCH qemu-server/manager/storage] scan cleanup/gui pci passthrough   Dominik Csapak
• [pve-devel] [PATCH qemu-server 1/3] copy scan_usb from PVE::Storage   Dominik Csapak
• [pve-devel] [PATCH qemu-server 2/3] PCI.pm: improve and extend lspci   Dominik Csapak
• [pve-devel] [PATCH qemu-server 3/3] PCI.pm: implement get_mdev_types   Dominik Csapak
• [pve-devel] [PATCH manager 01/11] copy Scan.pm from pve-storage   Dominik Csapak
• [pve-devel] [PATCH manager 02/11] Scan.pm: whitespace fixes   Dominik Csapak
• [pve-devel] [PATCH manager 03/11] Scan.pm: remove unused HTTP::Status module   Dominik Csapak
• [pve-devel] [PATCH manager 04/11] use scan_usb from qemu-server rather than pve-storage   Dominik Csapak
• [pve-devel] [PATCH manager 05/11] rename PVE::API2::Storage::Scan to PVE::API2:Scan   Dominik Csapak
• [pve-devel] [PATCH manager 06/11] Scan.pm: add pci scan api call   Dominik Csapak
• [pve-devel] [PATCH manager 07/11] Scan.pm: add mdev scan api call   Dominik Csapak
• [pve-devel] [PATCH manager 08/11] gui: add form/PCISelector   Dominik Csapak
• [pve-devel] [PATCH manager 09/11] gui: add MDevSelector   Dominik Csapak
• [pve-devel] [PATCH manager 10/11] gui: add qemu/PCIEdit.js   Dominik Csapak
• [pve-devel] [PATCH manager 11/11] gui: let users add PCI devices   Dominik Csapak
• [pve-devel] [PATCH storage 1/3] move Scan API calls from PVE/API2/Storage/Scan.pm to pvesm.pm   Dominik Csapak
• [pve-devel] [PATCH storage 2/3] remove PVE/API2/Storage/Scan.pm   Dominik Csapak
• [pve-devel] [PATCH storage 3/3] remove usb scan code   Dominik Csapak
• [pve-devel] [PATCH common/qemu-server/manager/storage] cleanup and refactor mania   Dominik Csapak
• [pve-devel] [PATCH common 1/5] copy pci related subs from PVE::QemuServer   Dominik Csapak
• [pve-devel] [PATCH common 2/5] SysFSTools.pm: refactor pci regex   Dominik Csapak
• [pve-devel] [PATCH common 3/5] SysFSTools.pm: implement filter in lspci   Dominik Csapak
• [pve-devel] [PATCH common 4/5] SysFSTools.pm: implement iommu check   Dominik Csapak
• [pve-devel] [PATCH common 5/5] copy scan_usb from PVE::Storage to PVE::SysFSTools   Dominik Csapak
• [pve-devel] [PATCH qemu-server 1/1] remove PCI helpers from QemuServer.pm   Dominik Csapak
• [pve-devel] [PATCH manager 1/5] copy Scan.pm from pve-storage   Dominik Csapak
• [pve-devel] [PATCH manager 2/5] Scan.pm: whitespace fixes   Dominik Csapak
• [pve-devel] [PATCH manager 3/5] Scan.pm: remove unused HTTP::Status module   Dominik Csapak
• [pve-devel] [PATCH manager 4/5] use scan_usb from PVE::SysFSTools rather than PVE::Storage   Dominik Csapak
• [pve-devel] [PATCH manager 5/5] rename PVE::API2::Storage::Scan to PVE::API2::Scan   Dominik Csapak
• [pve-devel] [PATCH storage 1/3] move Scan API calls from PVE/API2/Storage/Scan.pm to pvesm.pm   Dominik Csapak
• [pve-devel] [PATCH storage 2/3] remove PVE/API2/Storage/Scan.pm   Dominik Csapak
• [pve-devel] [PATCH storage 3/3] remove usb scan code   Dominik Csapak
• [pve-devel] [PATCH common/qemu-server/manager] add mdev support and passthrough gui   Dominik Csapak
• [pve-devel] [PATCH common 1/2] SysFSTools.pm: add mediated devices subs   Dominik Csapak
• [pve-devel] [PATCH common 2/2] SysFSTools.pm: improve and extend lspci   Dominik Csapak
• [pve-devel] [PATCH qemu-server 1/2] add mediated devices support   Dominik Csapak
• [pve-devel] [PATCH qemu-server 2/2] use improved lspci   Dominik Csapak
• [pve-devel] [PATCH manager 1/6] Scan.pm: add pci scan api call   Dominik Csapak
• [pve-devel] [PATCH manager 2/6] Scan.pm: add mdev scan api call   Dominik Csapak
• [pve-devel] [PATCH manager 3/6] gui: add form/PCISelector   Dominik Csapak
• [pve-devel] [PATCH manager 4/6] gui: add MDevSelector   Dominik Csapak
• [pve-devel] [PATCH manager 5/6] gui: add qemu/PCIEdit.js   Dominik Csapak
• [pve-devel] [PATCH manager 6/6] gui: let users add PCI devices   Dominik Csapak
• [pve-devel] applied: [PATCH manager v3] fix #1358: ui: show clustername besides 'Datacenter' node, if available   Dominik Csapak
• [pve-devel] applied: [PATCH manager] fix #1224: ui: ACLAdd: allow to filter by username   Dominik Csapak
• [pve-devel] applied: [PATCH manager 0/3] ui: storage: cleanup and allow to add CephFS storage entry   Dominik Csapak
• [pve-devel] [PATCH manager] gui: refactor render_full_name   Dominik Csapak
• [pve-devel] applied: [PATCH manager] ui: lxc/net: s/i.e./e.g./ and transform to emptyText   Dominik Csapak
• [pve-devel] [PATCH common] Tools.pm: do not ignore "0" in split_list   Dominik Csapak
• [pve-devel] [PATCH common/qemu-server/manager v2] add mdev support and passthrough gui   Dominik Csapak
• [pve-devel] [PATCH common 1/2 v2] SysFSTools.pm: add mediated devices subs   Dominik Csapak
• [pve-devel] [PATCH common 2/2 v2] SysFSTools.pm: improve and extend lspci   Dominik Csapak
• [pve-devel] [PATCH qemu-server 1/2 v2] add mediated devices support   Dominik Csapak
• [pve-devel] [PATCH qemu-server 2/2 v2] use improved lspci   Dominik Csapak
• [pve-devel] [PATCH manager 1/6 v2] Scan.pm: add pci scan api call   Dominik Csapak
• [pve-devel] [PATCH manager 2/6 v2] Scan.pm: add mdev scan api call   Dominik Csapak
• [pve-devel] [PATCH manager 3/6 v2] gui: add form/PCISelector   Dominik Csapak
• [pve-devel] [PATCH manager 4/6 v2] gui: add MDevSelector   Dominik Csapak
• [pve-devel] [PATCH manager 5/6 v2] gui: add qemu/PCIEdit.js   Dominik Csapak
• [pve-devel] [PATCH manager 6/6 v2] gui: let users add PCI devices   Dominik Csapak
• [pve-devel] [PATCH common/qemu-server/manager v2] add mdev support and passthrough gui   Dominik Csapak
• [pve-devel] [PATCH manager v3 0/6] add pci passthrough gui   Dominik Csapak
• [pve-devel] [PATCH manager v3 1/6] Scan.pm: add pci scan api call   Dominik Csapak
• [pve-devel] [PATCH manager v3 2/6] Scan.pm: add mdev scan api call   Dominik Csapak
• [pve-devel] [PATCH manager v3 3/6] gui: add form/PCISelector   Dominik Csapak
• [pve-devel] [PATCH manager v3 4/6] gui: add MDevSelector   Dominik Csapak
• [pve-devel] [PATCH manager v3 5/6] gui: add qemu/PCIEdit.js   Dominik Csapak
• [pve-devel] [PATCH manager v3 6/6] gui: let users add PCI devices   Dominik Csapak
• [pve-devel] [PATCH manager v2 5/5] ui: add CephFS integration   Dominik Csapak
• [pve-devel] [PATCH manager v2 2/5] ceph: add MDS create/delete/list API   Dominik Csapak
• [pve-devel] [PATCH manager v2 3/5] ceph: add CephFS create and list API   Dominik Csapak
• [pve-devel] [PATCH manager v2 5/5] ui: add CephFS integration   Dominik Csapak
• [pve-devel] [PATCH manager 0/3] ceph gui: add restart buttons   Dominik Csapak
• [pve-devel] [PATCH manager 1/3] ceph: add service restart api call   Dominik Csapak
• [pve-devel] [PATCH manager 2/3] gui: add osd restart button   Dominik Csapak
• [pve-devel] [PATCH manager 3/3] gui: add ceph monitor restart button   Dominik Csapak
• [pve-devel] applied: [PATCH manager v4] ui: add CephFS integration   Dominik Csapak
• [pve-devel] [PATCH docs] fix clean-static find call   Dominik Csapak
• [pve-devel] [PATCH access-control] fix #1998: correct return properties for read_role   Dominik Csapak
• [pve-devel] [PATCH common] SysFSTools: add return format comments   Dominik Csapak
• [pve-devel] [PATCH docs 1/2] pci passthrough: add GPU passthrough notes   Dominik Csapak
• [pve-devel] [PATCH docs 2/2] pci passthrough: add example for functions   Dominik Csapak
• [pve-devel] [PATCH access-control] api/ticket: move getting cluster name into an eval   Dominik Csapak
• [pve-devel] [PATCH qemu-server 1/2] fix q35 live migration   Dominik Csapak
• [pve-devel] [PATCH qemu-server 2/2] better cleanup logging for migration   Dominik Csapak
• [pve-devel] [PATCH qemu-server 2/2] better cleanup logging for migration   Dominik Csapak
• [pve-devel] [PATCH qemu-server 1/2] fix q35 live migration   Dominik Csapak
• [pve-devel] [PATCH manager 3/3] ui: cephfs: only allow CephFS creation if MDS is configured   Dominik Csapak
• [pve-devel] [PATCH qemu-server v2] better cleanup logging for migration   Dominik Csapak
• [pve-devel] [PATCH qemu-server v3] better cleanup logging for migration   Dominik Csapak
• [pve-devel] [PATCH manager] add pciutils as dependency   Dominik Csapak
• [pve-devel] applied: [PATCH widget-toolkit] form: proxmox textfield: support binding 'allowBlank'   Dominik Csapak
• [pve-devel] applied: [PATCH manager] ui: cluster: require ring0_addr if joinee's ring and node addr differ   Dominik Csapak
• [pve-devel] [PATCH qemu-server 1/2] vnc/termproxy: use ssh_info_to_command for ssh tunnel   Dominik Csapak
• [pve-devel] [PATCH qemu-server 2/2] fix #2003: give 'qm terminal' a terminal over ssh   Dominik Csapak
• [pve-devel] [PATCH i18n] update german translation   Dominik Csapak
• [pve-devel] [PATCH firewall] macro: fix return verification failure   Dominik Csapak
• [pve-devel] [PATCH i18n v2] update german translation   Dominik Csapak
• [pve-devel] [PATCH firewall 1/2] fix #2005: only allow ascii port digits   Dominik Csapak
• [pve-devel] [PATCH firewall 2/2] fix #2004: do not allow backwards ranges   Dominik Csapak
• [pve-devel] [PATCH qemu-server] fix #1811: allow VM.Config.HWType to add serial socket   Dominik Csapak
• [pve-devel] [PATCH firewall 2/2] fix #2004: do not allow backwards ranges   Dominik Csapak
• [pve-devel] [PATCH firewall v2] fix #2004: do not allow backwards ranges   Dominik Csapak
• [pve-devel] [PATCH firewall 0/2] Fix #1971: display firewall rule properties   Rhonda D'Vine
• [pve-devel] [PATCH firewall 1/2] Fix #1971: display firewall rule properties   Rhonda D'Vine
• [pve-devel] [PATCH firewall 2/2] Add missing Build-Depends   Rhonda D'Vine
• [pve-devel] [PATCH guest-common] Bash completion helper for snapshot name   Rhonda D'Vine
• [pve-devel] [PATCH container] Fix #1924: add snapshot parameter   Rhonda D'Vine
• [pve-devel] [PATCH qemu-server 0/2] Fix #1924: add snapshot parameter   Rhonda D'Vine
• [pve-devel] [PATCH qemu-server 1/2] Fix #1924: add snapshot parameter   Rhonda D'Vine
• [pve-devel] [PATCH qemu-server 2/2] Add missing Build-Depends   Rhonda D'Vine
• [pve-devel] [PATCH firewall 1/2] Fix #1971: display firewall rule properties   Rhonda D'Vine
• [pve-devel] [PATCH v2 firewall 0/2] Fix #1971: display firewall rule properties   Rhonda D'Vine
• [pve-devel] [PATCH v2 firewall 1/2] Fix #1971: display firewall rule properties   Rhonda D'Vine
• [pve-devel] [PATCH v2 firewall 2/2] Add missing Build-Depends   Rhonda D'Vine
• [pve-devel] [PATCH v2 container] Fix #1924: add snapshot parameter   Rhonda D'Vine
• [pve-devel] [PATCH v2 guest-common] Bash completion helper for snapshot name   Rhonda D'Vine
• [pve-devel] [PATCH v2 qemu-server] Fix #1924: add snapshot parameter   Rhonda D'Vine
• [pve-devel] [PATCH qemu-server 0/7] online vm migration to external cluster   Alexandre DERUMIER
• [pve-devel] [PATCH qemu-server 2/7] qm: add nextvmid   Alexandre DERUMIER
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Alexandre DERUMIER
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Alexandre DERUMIER
• [pve-devel] [PATCH qemu-server 1/7] api2 : migrate_vm : add migration_type "external"   Alexandre DERUMIER
• [pve-devel] [PATCH qemu-server 1/7] api2 : migrate_vm : add migration_type "external"   Alexandre DERUMIER
• [pve-devel] pve-firewall : log conntrack sessions ?   Alexandre DERUMIER
• [pve-devel] pve-firewall : can't have log on drop/reject rules   Alexandre DERUMIER
• [pve-devel] pve-firewall : log conntrack sessions ?   Alexandre DERUMIER
• [pve-devel] pve-firewall : nftables ?   Alexandre DERUMIER
• [pve-devel] pve-firewall : nftables ?   Alexandre DERUMIER
• [pve-devel] pve-firewall : nftables ?   Alexandre DERUMIER
• [pve-devel] pve-firewall : nftables ?   Alexandre DERUMIER
• [pve-devel] pve-firewall : nftables ?   Alexandre DERUMIER
• [pve-devel] pve-firewall : nftables ?   Alexandre DERUMIER
• [pve-devel] pve-firewall : nftables ?   Alexandre DERUMIER
• [pve-devel] [PATCH v2 qemu-server 0/7] online vm migration to external cluster   Alexandre Derumier
• [pve-devel] [PATCH v2 qemu-server 1/7] api2 : add migrate_vm_external   Alexandre Derumier
• [pve-devel] [PATCH v2 qemu-server 2/7] migrate : prepare : add create_vm for external migration   Alexandre Derumier
• [pve-devel] [PATCH v2 qemu-server 3/7] migrate : phase1 : skip sync_disk for external migration   Alexandre Derumier
• [pve-devel] [PATCH v2 qemu-server 4/7] migrate : phase2 : migrate external   Alexandre Derumier
• [pve-devel] [PATCH v2 qemu-server 5/7] migrate : phase2_cleanup : migrate_external   Alexandre Derumier
• [pve-devel] [PATCH v2 qemu-server 6/7] migrate : phase3_cleanup : migrate_external   Alexandre Derumier
• [pve-devel] [PATCH v2 qemu-server 7/7] migrate: add sshkey in /etc/pve/priv/migrate_external/   Alexandre Derumier
• [pve-devel] [PATCH pve-common] Network : veth pair : fix mtu   Alexandre Derumier
• [pve-devel] [PATCH v2 pve-common] Network : veth pair : fix mtu   Alexandre Derumier
• [pve-devel] [PATCH v3 qemu-server 0/7] online vm migration to external cluster   Alexandre Derumier
• [pve-devel] [PATCH v3 qemu-server 1/7] api2 : add migrate_vm_external   Alexandre Derumier
• [pve-devel] [PATCH v3 qemu-server 2/7] migrate : prepare : add create_vm for external migration   Alexandre Derumier
• [pve-devel] [PATCH v3 qemu-server 3/7] migrate : phase1 : skip sync_disk for external migration   Alexandre Derumier
• [pve-devel] [PATCH v3 qemu-server 4/7] migrate : phase2 : migrate external   Alexandre Derumier
• [pve-devel] [PATCH v3 qemu-server 5/7] migrate : phase2_cleanup : migrate_external   Alexandre Derumier
• [pve-devel] [PATCH v3 qemu-server 6/7] migrate : phase3_cleanup : migrate_external   Alexandre Derumier
• [pve-devel] [PATCH v3 qemu-server 7/7] migrate: add sshkey in /etc/pve/priv/migrate_external/   Alexandre Derumier
• [pve-devel] [RFC common] schema_get_type_text: summarize enumeration for docs   Fabian Grünbichler
• [pve-devel] [PATCH corosync/libqb 00/12] update corosync to 2.4.4   Fabian Grünbichler
• [pve-devel] [PATCH corosync-pve 01/10] update sources to 2.4.4-3   Fabian Grünbichler
• [pve-devel] [PATCH corosync-pve 02/10] rebase and re-format patches   Fabian Grünbichler
• [pve-devel] [PATCH corosync-pve 03/10] build: revert upstream switch to DH 11   Fabian Grünbichler
• [pve-devel] [PATCH corosync-pve 04/10] build: drop patch applied upstream   Fabian Grünbichler
• [pve-devel] [PATCH corosync-pve 05/10] d/control: bump versioned b-d on libqb   Fabian Grünbichler
• [pve-devel] [PATCH corosync-pve 06/10] build: add dsc target   Fabian Grünbichler
• [pve-devel] [PATCH corosync-pve 07/10] build: move some patches into debian/   Fabian Grünbichler
• [pve-devel] [PATCH corosync-pve 08/10] build: add dbgsym packages to Makefile   Fabian Grünbichler
• [pve-devel] [PATCH corosync-pve 09/10] build: add new build artifacts to clean target   Fabian Grünbichler
• [pve-devel] [PATCH corosync-pve 10/10] bump version to 2.4.4-pve1   Fabian Grünbichler
• [pve-devel] [PATCH libqb 1/2] update to 1.0.3-1   Fabian Grünbichler
• [pve-devel] [PATCH libqb 2/2] update sources to 1.0.3-1   Fabian Grünbichler
• [pve-devel] [RFC_V2 manager] Storage: remove guest images in storage contendview   Fabian Grünbichler
• [pve-devel] [PATCH qemu-server 1/7] api2 : migrate_vm : add migration_type "external"   Fabian Grünbichler
• [pve-devel] [PATCH ceph 1/2] build: add dsc target   Fabian Grünbichler
• [pve-devel] [PATCH ceph 2/2] patches: remove fuzz and re-format   Fabian Grünbichler
• [pve-devel] [PATCH manager 1/8] api/CephOSD: cleanup module usage   Fabian Grünbichler
• [pve-devel] [PATCH manager 2/8] api/Ceph: cleanup module usage   Fabian Grünbichler
• [pve-devel] [PATCH manager 3/8] api/Ceph: actually use imported file_get_contents   Fabian Grünbichler
• [pve-devel] [PATCH manager 4/8] CephTools: cleanup module usage   Fabian Grünbichler
• [pve-devel] [PATCH manager 6/8] ceph: add MDS create/delete/list API   Fabian Grünbichler
• [pve-devel] [PATCH installer v3 0/7] don't create swap on ZFS as default   Fabian Grünbichler
• [pve-devel] [PATCH/RFC 0/2] Fix #1922 - run proxied pvesh calls as non-cli environment   Fabian Grünbichler
• [pve-devel] [RFC manager] fix #1997: set taskid for single-guest backups   Fabian Grünbichler
• [pve-devel] [RFC proxmox-widget-toolkit] tasks: put vzdump into VM/CT category   Fabian Grünbichler
• [pve-devel] [PATCH zfsonlinux 0/3] update ZFS+SPL to 0.7.12   Stoiko Ivanov
• [pve-devel] [PATCH zfsonlinux 1/3] update/rebase to spl-0.7.12 with patches from ZOL   Stoiko Ivanov
• [pve-devel] [PATCH zfsonlinux 2/3] update/rebase to zfs-0.7.12 with patches from ZOL   Stoiko Ivanov
• [pve-devel] [PATCH zfsonlinux 3/3] bump version to 0.7.12-pve1~bpo1   Stoiko Ivanov
• [pve-devel] [PATCH pve-kernel 0/3] add 2 security fixes and update ZFS   Stoiko Ivanov
• [pve-devel] [PATCH pve-kernel 1/3] Add 3 Patches addressing security issues   Stoiko Ivanov
• [pve-devel] [PATCH pve-kernel 2/3] update ZFS on Linux to 0.7.12   Stoiko Ivanov
• [pve-devel] [PATCH pve-kernel 3/3] bump version to 4.15.18-30   Stoiko Ivanov
• [pve-devel] [RFC/PATCH v2 installer 0/3] don't create swap on ZFS as default   Stoiko Ivanov
• [pve-devel] [RFC/PATCH v2 installer 1/3] Add minfree handling for ZFS   Stoiko Ivanov
• [pve-devel] [RFC/PATCH v2 installer 2/3] Add minfree entry to ZFS grid   Stoiko Ivanov
• [pve-devel] [RFC/PATCH v2 installer 3/3] do not create a swap zvol   Stoiko Ivanov
• [pve-devel] [PATCH common 0/2] fix #1956 return controlling terminal in fork_worker   Stoiko Ivanov
• [pve-devel] [PATCH common 1/2] fork_worker: refactor child exit   Stoiko Ivanov
• [pve-devel] [PATCH common 2/2] fix #1956: return controlling terminal to parent   Stoiko Ivanov
• [pve-devel] [PATCH common 1/2] fork_worker: refactor child exit   Stoiko Ivanov
• [pve-devel] [PATCH installer v3 0/7] don't create swap on ZFS as default   Stoiko Ivanov
• [pve-devel] [PATCH installer v3 1/7] Unify and adapt disk partitioning   Stoiko Ivanov
• [pve-devel] [PATCH installer v3 2/7] Remove partition_bootable_zfs_disk   Stoiko Ivanov
• [pve-devel] [PATCH installer v3 3/7] Refactor $maxhdsize computation   Stoiko Ivanov
• [pve-devel] [PATCH installer v3 4/7] Fix typo in error message.   Stoiko Ivanov
• [pve-devel] [PATCH installer v3 5/7] Add hdsize spinbutton to ZFS grid   Stoiko Ivanov
• [pve-devel] [PATCH installer v3 6/7] Do not create a swap zvol   Stoiko Ivanov
• [pve-devel] [PATCH installer v3 7/7] buildsys: use truncate to create test.img   Stoiko Ivanov
• [pve-devel] [PATCH docs 0/2] Document Advanced ZFS installation options   Stoiko Ivanov
• [pve-devel] [PATCH docs 1/2] Expand documentation for swap with ZFS.   Stoiko Ivanov
• [pve-devel] [PATCH docs 2/2] installation: document advanced ZFS options   Stoiko Ivanov
• [pve-devel] [PATCH/RFC 0/2] Fix #1922 - run proxied pvesh calls as non-cli environment   Stoiko Ivanov
• [pve-devel] [PATCH common 1/1] RESTEnvironment: add helper for other env-types   Stoiko Ivanov
• [pve-devel] [PATCH manager 1/2] pvesh: use different rpcenvironment when proxying   Stoiko Ivanov
• [pve-devel] [PATCH manager 2/2] pvesh: allow_nonref while decoding proxied output.   Stoiko Ivanov
• [pve-devel] [PATCH installer 0/2] fix spinbutton_hdsize initial value display   Stoiko Ivanov
• [pve-devel] [PATCH installer 1/2] Fix typo in get_hdsize_spinbtn errormessage   Stoiko Ivanov
• [pve-devel] [PATCH installer 2/2] Reset adjustment for spinbutton_hdsize   Stoiko Ivanov
• [pve-devel] [PATCH i18n] update german translation   Stoiko Ivanov
• [pve-devel] pve-firewall : nftables ?   Josef Johansson
• [pve-devel] [PATCH manager] lxc/Features: not that keyctl is uneccesarry for priviledged   Thomas Lamprecht
• [pve-devel] applied: [PATCH manager v3] gui: expose lxc features   Thomas Lamprecht
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Thomas Lamprecht
• [pve-devel] [RFC common] schema_get_type_text: summarize enumeration for docs   Thomas Lamprecht
• [pve-devel] [RFC common] schema_get_type_text: summarize enumeration for docs   Thomas Lamprecht
• [pve-devel] [PATCH manager] remove unnecessary sort function in HardwareView.js   Thomas Lamprecht
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Thomas Lamprecht
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Thomas Lamprecht
• [pve-devel] [PATCH qemu-server 1/1] fix #1952: make vga memory configurable   Thomas Lamprecht
• [pve-devel] [PATCH v2 pve-manager] Add "SSD emulation" property to IDE, SATA, and SCSI drives   Thomas Lamprecht
• [pve-devel] [PATCH manager 2/2] fix mount point/unused disk sorting in Resources.js   Thomas Lamprecht
• [pve-devel] applied: [PATCH v2 pve-manager] Add "SSD emulation" property to IDE, SATA, and SCSI drives   Thomas Lamprecht
• [pve-devel] applied: [PATCH manager 1/2] fix sorting for unused disks in HardwareView.js   Thomas Lamprecht
• [pve-devel] applied: [PATCH qemu-server 1/1 v2] fix #1952: make vga memory configurable   Thomas Lamprecht
• [pve-devel] applied: [PATCH manager 1/1 v2] gui: let users edit the vga memory   Thomas Lamprecht
• [pve-devel] applied: [PATCH container] allow fedora 29   Thomas Lamprecht
• [pve-devel] applied: [PATCH v2 manager 1/4] node zfs: added check for undefined & new case AVAIL   Thomas Lamprecht
• [pve-devel] [PATCH v2 manager 2/4] node zfs: added new component to display additional zfs details   Thomas Lamprecht
• [pve-devel] applied: [PATCH v3 storage 0/3] implemented changes   Thomas Lamprecht
• [pve-devel] [PATCH libqb 1/2] update to 1.0.3-1   Thomas Lamprecht
• [pve-devel] [PATCH corosync/libqb 00/12] update corosync to 2.4.4   Thomas Lamprecht
• [pve-devel] [PATCH qemu-server/manager 0/2] fix #1969: increase max unused   Thomas Lamprecht
• [pve-devel] [PATCH manager 1/1] add_storage creates only one ceph storage entry   Thomas Lamprecht
• [pve-devel] [PATCH storage 1/1] implement map_volume and unmap_volume   Thomas Lamprecht
• [pve-devel] applied: [PATCH container 1/1] call map_volume before using volumes.   Thomas Lamprecht
• [pve-devel] applied: [PATCH container 1/1] call map_volume before using volumes.   Thomas Lamprecht
• [pve-devel] applied: [PATCH pve-docs] Document new SSD emulation feature   Thomas Lamprecht
• [pve-devel] applied: [PATCH qemu-server] check for $vga->{type} instead of $vga   Thomas Lamprecht
• [pve-devel] applied: [PATCH v3 manager 0/3] added suggested changes   Thomas Lamprecht
• [pve-devel] applied: [PATCH docs] add documentation for display types and memory configuration   Thomas Lamprecht
• [pve-devel] [PATCH manager v2] add_storage creates only one ceph storage entry   Thomas Lamprecht
• [pve-devel] applied: [PATCH docs] add documentation for pci passthrough and sr-iov   Thomas Lamprecht
• [pve-devel] [PATCH 0/2] return cluster name on successful login if available   Thomas Lamprecht
• [pve-devel] [PATCH access-control 1/1] fix #233: return cluster name on successful login   Thomas Lamprecht
• [pve-devel] [PATCH manager 1/1] fix #1358: ui: show clustername besides 'Datacenter' node, if available   Thomas Lamprecht
• [pve-devel] applied: [PATCH v2 qemu-server 00/12] initial arm support   Thomas Lamprecht
• [pve-devel] applied: [RFC manager] add help button to 'My Settings' window   Thomas Lamprecht
• [pve-devel] applied: [RFC manager] add help button to 'My Settings' window   Thomas Lamprecht
• [pve-devel] [RFC manager] add help button to 'My Settings' window   Thomas Lamprecht
• [pve-devel] [PATCH docs 1/2] remove 4th section and fix typos   Thomas Lamprecht
• [pve-devel] [PATCH qemu-server 1/2] move pci related subs to QemuServer/PCI.pm   Thomas Lamprecht
• [pve-devel] [RFC_V2 manager] Storage: remove guest images in storage contendview   Thomas Lamprecht
• [pve-devel] applied: [PATCH docs 1/2] remove 4th section and fix typos   Thomas Lamprecht
• [pve-devel] applied: [PATCH docs 2/2] add documentation for mediated devices   Thomas Lamprecht
• [pve-devel] applied: [PATCH changeme] Enable "Discard" option for IDE and SATA drives   Thomas Lamprecht
• [pve-devel] applied: [PATCH v2 firewall 1/2] Fix #1971: display firewall rule properties   Thomas Lamprecht
• [pve-devel] applied: [PATCH v2 firewall 2/2] Add missing Build-Depends   Thomas Lamprecht
• [pve-devel] applied: [PATCH guest-common 0/6] dsc target and general cleanup   Thomas Lamprecht
• [pve-devel] [PATCH qemu-server 1/2] Fix #1924: add snapshot parameter   Thomas Lamprecht
• [pve-devel] applied: [PATCH qemu-server 2/2] Add missing Build-Depends   Thomas Lamprecht
• [pve-devel] [PATCH guest-common] Bash completion helper for snapshot name   Thomas Lamprecht
• [pve-devel] [PATCH storage] LVM: lock on volume_resize   Thomas Lamprecht
• [pve-devel] applied: [RFC manager] add help button to 'My Settings' window   Thomas Lamprecht
• [pve-devel] [PATCH storage] fix #862: do not resolve portal adress on storage add   Thomas Lamprecht
• [pve-devel] [PATCH docs] fix #1138: installation: note how one can progress with keyboard only   Thomas Lamprecht
• [pve-devel] applied: [PATCH pve-docs] Remove SCSI exclusivity from "Discard" drive option   Thomas Lamprecht
• [pve-devel] [PATCH common] fix #1548: replace perl use vars with our   Thomas Lamprecht
• [pve-devel] applied: [PATCH access-control 1/1] fix #233: return cluster name on successful login   Thomas Lamprecht
• [pve-devel] [PATCH 0/2] return cluster name on successful login if available   Thomas Lamprecht
• [pve-devel] applied: [PATCH v2 common] fix #1548: replace perl use vars with our   Thomas Lamprecht
• [pve-devel] [PATCH manager 0/3] ui: storage: cleanup and allow to add CephFS storage entry   Thomas Lamprecht
• [pve-devel] [PATCH manager 1/3] ui: storage: RBD: factor out view- model/controler   Thomas Lamprecht
• [pve-devel] [PATCH manager 2/3] ui: rbd: storage: obsolete strange getBinds binding assembly   Thomas Lamprecht
• [pve-devel] [PATCH manager 3/3] ui: dc/storage: allow to add CephFS   Thomas Lamprecht
• [pve-devel] [PATCH manager v2] fix #1358: ui: show clustername besides 'Datacenter' node, if available   Thomas Lamprecht
• [pve-devel] [PATCH manager v2] fix #1358: ui: show clustername besides 'Datacenter' node, if available   Thomas Lamprecht
• [pve-devel] applied: [PATCH zfsonlinux 0/3] update ZFS+SPL to 0.7.12   Thomas Lamprecht
• [pve-devel] [PATCH pve-kernel 0/3] add 2 security fixes and update ZFS   Thomas Lamprecht
• [pve-devel] applied: [PATCH ceph 1/2] build: add dsc target   Thomas Lamprecht
• [pve-devel] applied: [PATCH ceph 2/2] patches: remove fuzz and re-format   Thomas Lamprecht
• [pve-devel] [PATCH manager] fix 1928: ct snapshot: changed rollback message to warning   Thomas Lamprecht
• [pve-devel] [PATCH qemu-server 2/3] PCI.pm: improve and extend lspci   Thomas Lamprecht
• [pve-devel] [PATCH qemu-server 1/3] copy scan_usb from PVE::Storage   Thomas Lamprecht
• [pve-devel] [PATCH manager v3] fix #1358: ui: show clustername besides 'Datacenter' node, if available   Thomas Lamprecht
• [pve-devel] [PATCH manager] fix 1928: ct snapshot: changed rollback message to warning   Thomas Lamprecht
• [pve-devel] [PATCH manager] fix #1224: ui: ACLAdd: allow to filter by username   Thomas Lamprecht
• [pve-devel] applied: [PATCH v2 manager] fix #1928: ct snapshot: changed rollback message to warning   Thomas Lamprecht
• [pve-devel] [PATCH qemu-server v6 1/3] add qmeventd   Thomas Lamprecht
• [pve-devel] [PATCH common] tools: template_replace: esacpe braces   Thomas Lamprecht
• [pve-devel] applied: [common] minor updates to README.dev   Thomas Lamprecht
• [pve-devel] applied: [PATCH storage] plugin loader: add an APIAGE   Thomas Lamprecht
• [pve-devel] [RFC qemu-server] add config to command tests   Thomas Lamprecht
• [pve-devel] [PATCH manager] ui: lxc/net: s/i.e./e.g./ and transform to emptyText   Thomas Lamprecht
• [pve-devel] [PATCH manager] fix #1430: ceph init: allow to specify separate cluster network   Thomas Lamprecht
• [pve-devel] applied: [PATCH common/qemu-server/manager/storage] cleanup and refactor mania   Thomas Lamprecht
• [pve-devel] [PATCH storage] pvesm: add scan subcommands   Thomas Lamprecht
• [pve-devel] [PATCH manager 1/2] Create/destroy Ceph MDS   Thomas Lamprecht
• [pve-devel] [PATCH manager 2/2] Add createcephfs to pveceph   Thomas Lamprecht
• [pve-devel] [PATCH zsync 1/2] fix #1587: sync: check if job state is defined   Thomas Lamprecht
• [pve-devel] [PATCH zsync 2/2] vm_exists: directly check if we look for local guest   Thomas Lamprecht
• [pve-devel] [PATCH manager 1/3] api/CephOSD: cleanup module usage   Thomas Lamprecht
• [pve-devel] [PATCH manager 2/3] api/Ceph: cleanup module usage   Thomas Lamprecht
• [pve-devel] [PATCH manager 3/3] api/ceph: actually use imported file_get_contents   Thomas Lamprecht
• [pve-devel] [PATCH manager] CephTools: cleanup module usage   Thomas Lamprecht
• [pve-devel] applied: [docs] minor improvements to documentation   Thomas Lamprecht
• [pve-devel] [PATCH common 1/2] fork_worker: refactor child exit   Thomas Lamprecht
• [pve-devel] applied: [PATCH common 1/2] fork_worker: refactor child exit   Thomas Lamprecht
• [pve-devel] applied: [PATCH common 2/2] fix #1956: return controlling terminal to parent   Thomas Lamprecht
• [pve-devel] applied: [lxc] fix typo in package description   Thomas Lamprecht
• [pve-devel] [PATCH common/qemu-server/manager v2] add mdev support and passthrough gui   Thomas Lamprecht
• [pve-devel] [PATCH manager 0/8] CephFS/MDS server side implementation and cleanups   Thomas Lamprecht
• [pve-devel] [PATCH manager 1/8] api/CephOSD: cleanup module usage   Thomas Lamprecht
• [pve-devel] [PATCH manager 2/8] api/Ceph: cleanup module usage   Thomas Lamprecht
• [pve-devel] [PATCH manager 3/8] api/Ceph: actually use imported file_get_contents   Thomas Lamprecht
• [pve-devel] [PATCH manager 4/8] CephTools: cleanup module usage   Thomas Lamprecht
• [pve-devel] [PATCH manager 5/8] ceph: move create/destroy pool to CephTools   Thomas Lamprecht
• [pve-devel] [PATCH manager 6/8] ceph: add MDS create/delete/list API   Thomas Lamprecht
• [pve-devel] [PATCH manager 7/8] ceph: add CephFS create and list API   Thomas Lamprecht
• [pve-devel] [PATCH manager 8/8] pveceph: move to sub commands   Thomas Lamprecht
• [pve-devel] [PATCH manager 6/8] ceph: add MDS create/delete/list API   Thomas Lamprecht
• [pve-devel] [PATCH manager 2/6 v2] Scan.pm: add mdev scan api call   Thomas Lamprecht
• [pve-devel] [PATCH manager 3/6 v2] gui: add form/PCISelector   Thomas Lamprecht
• [pve-devel] [PATCH manager 4/6 v2] gui: add MDevSelector   Thomas Lamprecht
• [pve-devel] [PATCH manager 6/6 v2] gui: let users add PCI devices   Thomas Lamprecht
• [pve-devel] [PATCH manager 5/6 v2] gui: add qemu/PCIEdit.js   Thomas Lamprecht
• [pve-devel] [manager 6/6] Add imageRemoveButton   Thomas Lamprecht
• [pve-devel] [PATCH manager 2/8] api/Ceph: cleanup module usage   Thomas Lamprecht
• [pve-devel] [PATCH common/qemu-server/manager v2] add mdev support and passthrough gui   Thomas Lamprecht
• [pve-devel] applied: [manager V2] Add imageRemoveButton   Thomas Lamprecht
• [pve-devel] [PATCH manager v3 0/6] add pci passthrough gui   Thomas Lamprecht
• [pve-devel] [PATCH manager v2 0/5] CephFS/MDS server side implementation and cleanups   Thomas Lamprecht
• [pve-devel] [PATCH manager v2 1/5] ceph: move create/destroy pool to CephTools   Thomas Lamprecht
• [pve-devel] [PATCH manager v2 2/5] ceph: add MDS create/delete/list API   Thomas Lamprecht
• [pve-devel] [PATCH manager v2 3/5] ceph: add CephFS create and list API   Thomas Lamprecht
• [pve-devel] [PATCH manager v2 4/5] pveceph: move to sub commands   Thomas Lamprecht
• [pve-devel] [PATCH manager v2 5/5] ui: add CephFS integration   Thomas Lamprecht
• [pve-devel] [PATCH manager v2 5/5] ui: add CephFS integration   Thomas Lamprecht
• [pve-devel] [PATCH manager v2 5/5] ui: add CephFS integration   Thomas Lamprecht
• [pve-devel] [PATCH manager v3 0/5] CephFS/MDS server side implementation and cleanups   Thomas Lamprecht
• [pve-devel] [PATCH manager v3 1/5] ceph: move create/destroy pool to CephTools   Thomas Lamprecht
• [pve-devel] [PATCH manager v3 2/5] ceph: add MDS create/delete/list API   Thomas Lamprecht
• [pve-devel] [PATCH manager v3 3/5] ceph: add CephFS create and list API   Thomas Lamprecht
• [pve-devel] [PATCH manager v3 4/5] pveceph: move to sub commands   Thomas Lamprecht
• [pve-devel] [PATCH manager v3 5/5] ui: add CephFS integration   Thomas Lamprecht
• [pve-devel] applied: [PATCH manager 0/3] ceph gui: add restart buttons   Thomas Lamprecht
• [pve-devel] [PATCH installer v3 0/7] don't create swap on ZFS as default   Thomas Lamprecht
• [pve-devel] applied: [PATCH installer v3 0/7] don't create swap on ZFS as default   Thomas Lamprecht
• [pve-devel] applied: [PATCH proxmox-i18n] improve turkish translation   Thomas Lamprecht
• [pve-devel] [PATCH manager v4] ui: add CephFS integration   Thomas Lamprecht
• [pve-devel] applied: [PATCH docs] fix clean-static find call   Thomas Lamprecht
• [pve-devel] applied: [PATCH access-control] fix #1998: correct return properties for read_role   Thomas Lamprecht
• [pve-devel] applied: [PATCH manager] gui: refactor render_full_name   Thomas Lamprecht
• [pve-devel] applied: [PATCH docs 1/2] pci passthrough: add GPU passthrough notes   Thomas Lamprecht
• [pve-devel] applied: [PATCH docs 2/2] pci passthrough: add example for functions   Thomas Lamprecht
• [pve-devel] applied: [PATCH docs] minor improvements to installation   Thomas Lamprecht
• [pve-devel] applied: [PATCH common] SysFSTools: add return format comments   Thomas Lamprecht
• [pve-devel] [PATCH access-control] api/ticket: move getting cluster name into an eval   Thomas Lamprecht
• [pve-devel] applied: [PATCH access-control] api/ticket: move getting cluster name into an eval   Thomas Lamprecht
• [pve-devel] [PATCH manager 1/3] pveceph: ensure ceph-fuse gets uptdated when installing ceph server   Thomas Lamprecht
• [pve-devel] [PATCH manager 2/3] api: cephfs: reuse rados connection when polling for active MDS   Thomas Lamprecht
• [pve-devel] [PATCH manager 3/3] ui: cephfs: only allow CephFS creation if MDS is configured   Thomas Lamprecht
• [pve-devel] [PATCH manager] Add wipe_disk to createosd   Thomas Lamprecht
• [pve-devel] [PATCH manager] fix #1430: ceph init: allow to specify separate cluster network   Thomas Lamprecht
• [pve-devel] [PATCH manager] fix #1430: ceph init: allow to specify separate cluster network   Thomas Lamprecht
• [pve-devel] [PATCH storage] cephfs: tell systemd that mount mount requires network   Thomas Lamprecht
• [pve-devel] [PATCH qemu-server 1/2] fix q35 live migration   Thomas Lamprecht
• [pve-devel] [PATCH qemu-server 2/2] better cleanup logging for migration   Thomas Lamprecht
• [pve-devel] [PATCH qemu-server 2/2] better cleanup logging for migration   Thomas Lamprecht
• [pve-devel] [PATCH qemu-server 1/2] fix q35 live migration   Thomas Lamprecht
• [pve-devel] [PATCH widget-toolkit] form: proxmox textfield: support binding 'allowBlank'   Thomas Lamprecht
• [pve-devel] [PATCH manager] ui: cluster: require ring0_addr if joinee's ring and node addr differ   Thomas Lamprecht
• [pve-devel] [PATCH manager 1/3] pveceph: ensure ceph-fuse gets uptdated when installing ceph server   Thomas Lamprecht
• [pve-devel] [PATCH manager v2] fix #1430: ceph init: allow to specify separate cluster network   Thomas Lamprecht
• [pve-devel] [PATCH qemu-server v2] better cleanup logging for migration   Thomas Lamprecht
• [pve-devel] applied: [PATCH proxmox-i18n] update turkish translation   Thomas Lamprecht
• [pve-devel] [PATCH docs] pveceph: add initial CephFS documentation   Thomas Lamprecht
• [pve-devel] [PATCH manager v2] Factoring the wipe_disk out into CephTools   Thomas Lamprecht
• [pve-devel] applied: [PATCH qemu-server v3] better cleanup logging for migration   Thomas Lamprecht
• [pve-devel] [PATCH docs v2] pveceph: add initial CephFS documentation   Thomas Lamprecht
• [pve-devel] applied: [PATCH manager] add pciutils as dependency   Thomas Lamprecht
• [pve-devel] [PATCH v2 firewall 1/2] add connection tracking via libnetfilter_conntrack   Thomas Lamprecht
• [pve-devel] [PATCH installer 2/2] minor instruction change in html during install   Thomas Lamprecht
• [pve-devel] applied: [PATCH installer 0/2] fix spinbutton_hdsize initial value display   Thomas Lamprecht
• [pve-devel] applied: [PATCH v2 installer 2/2] minor instruction change in html   Thomas Lamprecht
• [pve-devel] applied: [PATCH installer] change last button to 'Install'   Thomas Lamprecht
• [pve-devel] [PATCH container] add features:fuse   Thomas Lamprecht
• [pve-devel] [PATCH common] update builddeps in readme   Thomas Lamprecht
• [pve-devel] applied: [PATCH manager] Raise the default pg_num to 128   Thomas Lamprecht
• [pve-devel] applied: [PATCH firewall] macro: fix return verification failure   Thomas Lamprecht
• [pve-devel] applied: [PATCH i18n v2] update german translation   Thomas Lamprecht
• [pve-devel] [PATCH qemu-server 0/7] online vm migration to external cluster   David Limbeck
• [pve-devel] [PATCH qemu-server/manager 0/2] fix #1969: increase max unused   David Limbeck
• [pve-devel] [PATCH qemu-server] fix #1969: increase max unused disks   David Limbeck
• [pve-devel] [PATCH manager] fix #1969: increase max unused disks   David Limbeck
• [pve-devel] [PATCH manager] remove unnecessary sort function in HardwareView.js   David Limbeck
• [pve-devel] [PATCH v2 manager 0/4] implemented suggested changes   David Limbeck
• [pve-devel] [PATCH manager] remove unnecessary sort function in HardwareView.js   David Limbeck
• [pve-devel] [PATCH manager 1/2] fix sorting for unused disks in HardwareView.js   David Limbeck
• [pve-devel] [PATCH manager 2/2] fix disk sorting in Resources.js   David Limbeck
• [pve-devel] [PATCH qemu-server 0/7] online vm migration to external cluster   David Limbeck
• [pve-devel] [PATCH qemu-server 1/7] api2 : migrate_vm : add migration_type "external"   David Limbeck
• [pve-devel] [PATCH qemu-server 2/7] qm: add nextvmid   David Limbeck
• [pve-devel] [PATCH qemu-server 3/7] migrate : prepare : add create_vm for external migration   David Limbeck
• [pve-devel] [PATCH qemu-server 5/7] migrate : phase2 : migrate external   David Limbeck
• [pve-devel] [PATCH qemu-server 5/7] migrate : phase2 : migrate external   David Limbeck
• [pve-devel] [PATCH manager 1/2] fix sorting for unused disks in HardwareView.js   David Limbeck
• [pve-devel] [PATCH manager 2/2] fix mount point/unused disk sorting in Resources.js   David Limbeck
• [pve-devel] [PATCH container] allow fedora 29   David Limbeck
• [pve-devel] [RFC docs/manager 0/2] fix #1975: extend 'My Settings' docs   David Limbeck
• [pve-devel] [RFC manager] add help button to 'My Settings' window   David Limbeck
• [pve-devel] [RFC docs] fix #1975: extend 'My Settings' documentation   David Limbeck
• [pve-devel] pve-firewall : log conntrack sessions ?   David Limbeck
• [pve-devel] [PATCH v2 qemu-server 0/7] online vm migration to external cluster   David Limbeck
• [pve-devel] [PATCH firewall] add connection tracking via libnetfilter_conntrack   David Limbeck
• [pve-devel] [PATCH v2 firewall 1/2] add connection tracking via libnetfilter_conntrack   David Limbeck
• [pve-devel] [PATCH v2 firewall 2/2] add libnetfilter-conntrack-dev to Build-Depends   David Limbeck
• [pve-devel] [PATCH v2 firewall 1/2] add connection tracking via libnetfilter_conntrack   David Limbeck
• [pve-devel] [PATCH v2 firewall 1/2] add connection tracking via libnetfilter_conntrack   David Limbeck
• [pve-devel] [PATCH i18n] update german translation   David Limbeck
• [pve-devel] [PATCH qemu-server] fix #1811: allow VM.Config.HWType to add serial socket   David Limbeck
• [pve-devel] [RFC_V2 manager] Storage: remove guest images in storage contendview   Wolfgang Link
• [pve-devel] [RFC_V3] Storage: remove guest images in storage contendview   Wolfgang Link
• [pve-devel] [manager] Allow delete image from storage ContentView.   Wolfgang Link
• [pve-devel] [storage] Add option check if the image can safely remove   Wolfgang Link
• [pve-devel] [RFC_V4] Storage: remove guest images in storage contendview   Wolfgang Link
• [pve-devel] [storage V4] Add option check if the image can safely remove   Wolfgang Link
• [pve-devel] [manager V4] Allow delete image from storage ContentView.   Wolfgang Link
• [pve-devel] [RFC_V5] Storage: remove guest images in storage contendview   Wolfgang Link
• [pve-devel] [manager 1/6] Add parameter storage shared   Wolfgang Link
• [pve-devel] [manager 2/6] Add function storageIsShared   Wolfgang Link
• [pve-devel] [manager 3/6] Add function guestNode   Wolfgang Link
• [pve-devel] [manager 4/6] Add imagedestroy to SafeDestroy   Wolfgang Link
• [pve-devel] [manager 5/6] Move removeButton in a variable   Wolfgang Link
• [pve-devel] [manager 6/6] Add imageRemoveButton   Wolfgang Link
• [pve-devel] [manager V2] Add imageRemoveButton   Wolfgang Link
• [pve-devel] [PATCH v2 storage 1/3] close #1949: storage zfs: changed zpool command parser   Tim Marx
• [pve-devel] [PATCH v2 manager 0/4] implemented suggested changes   Tim Marx
• [pve-devel] [PATCH v2 manager 1/4] node zfs: added check for undefined & new case AVAIL   Tim Marx
• [pve-devel] [PATCH v2 manager 2/4] node zfs: added new component to display additional zfs details   Tim Marx
• [pve-devel] [PATCH v2 manager 3/4] node zfs: renamed & revised tree component to display more information   Tim Marx
• [pve-devel] [PATCH v2 manager 4/4] node zfs: added panel to window as container for new components   Tim Marx
• [pve-devel] [PATCH v3 storage 0/3] implemented changes   Tim Marx
• [pve-devel] [PATCH v3 storage 1/3] close #1949: storage zfs: changed zpool command parser   Tim Marx
• [pve-devel] [PATCH v3 storage 2/3] storage zfs: changed return value description & optionals   Tim Marx
• [pve-devel] [PATCH v3 storage 3/3] storage zfs: removed unused variable   Tim Marx
• [pve-devel] [PATCH manager 1/2] fix sorting for unused disks in HardwareView.js   Tim Marx
• [pve-devel] [PATCH manager 1/2] fix sorting for unused disks in HardwareView.js   Tim Marx
• [pve-devel] [PATCH v3 manager 0/3] added suggested changes   Tim Marx
• [pve-devel] [PATCH v3 manager 1/3] node zfs: added read, write, cksum fields to device tree   Tim Marx
• [pve-devel] [PATCH v3 manager 2/3] node zfs: added new component to display additional zfs details   Tim Marx
• [pve-devel] [PATCH v3 manager 3/3] node zfs: added panel to window as container for new components   Tim Marx
• [pve-devel] [PATCH manager] fix 1928: ct snapshot: changed rollback message to warning   Tim Marx
• [pve-devel] [PATCH common] fix #1548: replace perl use vars with our   Tim Marx
• [pve-devel] [PATCH v2 common] fix #1548: replace perl use vars with our   Tim Marx
• [pve-devel] [PATCH manager] fix 1928: ct snapshot: changed rollback message to warning   Tim Marx
• [pve-devel] [PATCH v2 manager] fix #1928: ct snapshot: changed rollback message to warning   Tim Marx
• [pve-devel] [PATCH manager] fix #1430: ceph init: allow to specify separate cluster network   Tim Marx
• [pve-devel] [RFC_V2 manager] Storage: remove guest images in storage contendview   Dietmar Maurer
• [pve-devel] [storage] Add option check if the image can safely remove   Dietmar Maurer
• [pve-devel] [PATCH qemu-server 1/7] api2 : migrate_vm : add migration_type "external"   Dietmar Maurer
• [pve-devel] [storage] Add option check if the image can safely remove   Dietmar Maurer
• [pve-devel] [PATCH qemu-server 1/7] api2 : migrate_vm : add migration_type "external"   Dietmar Maurer
• [pve-devel] applied: [docs] minor improvements to documentation   Dietmar Maurer
• [pve-devel] applied: [pmg-api] fixed some typos in PMG/Config.pm   Dietmar Maurer
• [pve-devel] pve-firewall : can't have log on drop/reject rules   Dietmar Maurer
• [pve-devel] applied: [PATCH docs 0/2] Document Advanced ZFS installation options   Dietmar Maurer
• [pve-devel] pve-firewall : nftables ?   Dietmar Maurer
• [pve-devel] [PATCH pve-manager] Add "SSD" property to IDE, SATA, and SCSI hard drives   Dmitry Petuhov
• [pve-devel] pve-firewall : can't have log on drop/reject rules   Tom Weber
• [pve-devel] pve-firewall : nftables ?   Tom Weber

Last message date: Fri Nov 30 16:31:41 CET 2018
Archived on: Tue Nov 28 15:35:39 CET 2023

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...