[PVE-User] Windows 2000 Series installations

[David Thompson]

Yes. Same thing here. However the same version 1.9 at another site has no issues at all. Same basic config. Kind of odd how it works on one but not the other. 

_______
David

On 2011-12-11, at 4:39 AM, "Guillaume MESSONNIER" <guillaume.messonnier at free.fr> wrote:

> Yes, same problem ! Stop the VM and start it again... reboot the VM didn't work ! (proxmox 1.9 and 2.0 beta)
> 
> I remember that on proxmox 1.5 and 1.8, a simple reboot was ok...
> 
> Guillaume.
> 
> 2011/12/11 Martin Maurer <martin at proxmox.com>
> As far as I remember you  just have to stop the VM and start again and the windows installations should see the disk.
> Martin
> 
> > -----Original Message-----
> > From: pve-user-bounces at pve.proxmox.com [mailto:pve-user-
> > bounces at pve.proxmox.com] On Behalf Of David Thompson
> > Sent: Samstag, 10. Dezember 2011 21:11
> > To: pve-user at pve.proxmox.com
> > Subject: [PVE-User] Windows 2000 Series installations
> >
> > Hi all,
> >
> > I am hoping someone can point me in the right direction as I can't seem to get
> > this issue resolved. I have an Intel Dual node server system with the following
> > config:
> >
> > proxmox - v.1.9
> > 24 GB RAM
> > 2 X 2.4GB Quad Core Xeon
> > 2 X 500Gb Internal SATA Drives
> > 2 X 1GB Onboard ethernet
> >       1st Internal Boot Drives on 172.16.10.X network
> >       2nd Internal Drive for DRBD on 172.16.11.X network
> > 3 X 10GB Ethernet Adapters (1 card per node and 1 card in iSCSI RAID unit) -->
> > This is not currently active
> >
> > The boot systems on both nodes (master and slave) are on the first drives,
> > which handle both openvz and KVM The Second internal drives are setup as
> > LVM with DRDB for KVM systems on the 2nd ethernet network for
> > communication and replication
> >
> > I can spin up any type of system (Linux [ OpenVZ or KVM]) and they all work
> > perfectly well and very fast.
> >
> > However whenever I try and start up a new Windows Installation (WinXP, 2003
> > / 2008 Server) 32 or 64 Bit, I always get an error with the server whenever I try
> > to start an installation that the disks are in RAW format, that the system must
> > reboot, and then it never starts up.
> >
> > These VM's are set to start up from the .iso install disks that I have used on
> > other proxmox vm servers and never had a problem.
> >
> > If anyone can point me in the right direction, or if you need any more
> > information, I would love to get some input on how I can get around this silly
> > issue as I unfortunately need  to have the ability to spin up and run windows
> > workstation and server from time to time.
> >
> > Thank you,
> >
> > __________
> > David
> >
> >
> >
> >
> >
> > _______________________________________________
> > pve-user mailing list
> > pve-user at pve.proxmox.com
> > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> 
> 
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> 
> 
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20111211/b5f1d1ea/attachment.htm>