[PVE-User] Windows 2000 Series installations

[Guillaume MESSONNIER]

Yes, same problem ! Stop the VM and start it again... reboot the VM didn't
work ! (proxmox 1.9 and 2.0 beta)

I remember that on proxmox 1.5 and 1.8, a simple reboot was ok...

Guillaume.

2011/12/11 Martin Maurer <martin at proxmox.com>

> As far as I remember you  just have to stop the VM and start again and the
> windows installations should see the disk.
> Martin
>
> > -----Original Message-----
> > From: pve-user-bounces at pve.proxmox.com [mailto:pve-user-
> > bounces at pve.proxmox.com] On Behalf Of David Thompson
> > Sent: Samstag, 10. Dezember 2011 21:11
> > To: pve-user at pve.proxmox.com
> > Subject: [PVE-User] Windows 2000 Series installations
> >
> > Hi all,
> >
> > I am hoping someone can point me in the right direction as I can't seem
> to get
> > this issue resolved. I have an Intel Dual node server system with the
> following
> > config:
> >
> > proxmox - v.1.9
> > 24 GB RAM
> > 2 X 2.4GB Quad Core Xeon
> > 2 X 500Gb Internal SATA Drives
> > 2 X 1GB Onboard ethernet
> >       1st Internal Boot Drives on 172.16.10.X network
> >       2nd Internal Drive for DRBD on 172.16.11.X network
> > 3 X 10GB Ethernet Adapters (1 card per node and 1 card in iSCSI RAID
> unit) -->
> > This is not currently active
> >
> > The boot systems on both nodes (master and slave) are on the first
> drives,
> > which handle both openvz and KVM The Second internal drives are setup as
> > LVM with DRDB for KVM systems on the 2nd ethernet network for
> > communication and replication
> >
> > I can spin up any type of system (Linux [ OpenVZ or KVM]) and they all
> work
> > perfectly well and very fast.
> >
> > However whenever I try and start up a new Windows Installation (WinXP,
> 2003
> > / 2008 Server) 32 or 64 Bit, I always get an error with the server
> whenever I try
> > to start an installation that the disks are in RAW format, that the
> system must
> > reboot, and then it never starts up.
> >
> > These VM's are set to start up from the .iso install disks that I have
> used on
> > other proxmox vm servers and never had a problem.
> >
> > If anyone can point me in the right direction, or if you need any more
> > information, I would love to get some input on how I can get around this
> silly
> > issue as I unfortunately need  to have the ability to spin up and run
> windows
> > workstation and server from time to time.
> >
> > Thank you,
> >
> > __________
> > David
> >
> >
> >
> >
> >
> > _______________________________________________
> > pve-user mailing list
> > pve-user at pve.proxmox.com
> > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20111211/fc746501/attachment.htm>