[PVE-User] vlan setup at time of host installation

[Timo Veith]

Hi everyone, 

great replies! Thanks to anybody who answered! With that in my „pocket“ I will surely get further with my test installation. 

I already learned something new, because I never heard of a „vlan aware bridge“. 

Cheers and have nice day
Timo



> Am 16.07.2023 um 16:59 schrieb Stefan Radman via pve-user <pve-user at lists.proxmox.com>:
> 
> 
> Von: Stefan Radman <stefan.radman at me.com>
> Betreff: Aw: [PVE-User] vlan setup at time of host installation
> Datum: 16. Juli 2023 um 16:59:25 MESZ
> An: Proxmox VE user list <pve-user at lists.proxmox.com>
> 
> 
> Hi Timo
> 
> See https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#_default_configuration_using_a_bridge <https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#_default_configuration_using_a_bridge>
> 3.3.4. Default Configuration using a Bridge <https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#_default_configuration_using_a_bridge>
> The installation program creates a single bridge named vmbr0, which is connected to the first Ethernet card. 
> 
> The Proxmox VE installer does not support vlan tagging during the installation.
> At time of installation all traffic is untagged.
> 
> Once you have access to the management GUI (through the management IP address provided during installation) you can complete the network configuration and configure VLAN tagging.
> https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#sysadmin_network_vlan <https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#sysadmin_network_vlan>
> Select node > Network > Create > Linux VLAN
> 
> Stefan
> 
>> On Jul 15, 2023, at 22:25, Timo Veith <timo.veith at uni-tuebingen.de> wrote:
>> 
>> Dear pve users,
>> 
>> I am totally new to pve. Is there a recommended way to setup vlans during the installation of a host? I have found some notes about vlans in the documentation but it only describes some sections in /etc/network/interfaces but it doesn’t say when this should be done. In fact I did one of the proposed methods and I can connect to the management ip address in that vlan but I wonder if it was right how I did it. I installed from the iso, configured some ip because I didn’t find any option for using vlans in the installer and then searched through the documentation. I changed the /etc/network/interfaces and did a reboot. Where after I was able to connect to the ip address that I configured. However in the console I can still read „use blabla ip and port 8006“ which is the ip I used during the installation. 
>> 
>> Cheers
>> Timo_______________________________________________
>> pve-user mailing list
>> pve-user at lists.proxmox.com
>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> 
> 
> 
> _______________________________________________
> pve-user mailing list
> pve-user at lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user