[PVE-User] openvswitch + bond0 + 2 Fiber interfaces.

[Сергей Цаболов]

Hello,

I have PVE cluster and I thinking to install on  the pve-7 openvswitch 
for can move and add VM from other networks and Proxmox Cluster

With base Linux bridge all work well without problem with 2 interface 
10GB ens1f0np0 ens1f12np0

I  install openvswitch  with manual 
https://pve.proxmox.com/wiki/Open_vSwitch

I want use Fiber  10GB interfaces ens1f0np0 ens1f12np0  with Bond I think.

I try some settings but is not working.

My setup in interfaces:

auto lo
iface lo inet loopback

auto ens1f12np0
iface ens1f12np0 inet manual
#Fiber

iface idrac inet manual

iface eno2 inet manual

iface eno3 inet manual

iface eno4 inet manual

auto ens1f0np0
iface ens1f0np0 inet manual

iface eno1 inet manual

auto inband
iface inband inet static
     address 10.10.29.10/24
     gateway 10.10.29.250
     ovs_type OVSIntPort
     ovs_bridge vmbr0
#Proxmox Web Access

auto vlan10
iface vlan10 inet manual
     ovs_type OVSIntPort
     ovs_bridge vmbr0
     ovs_options tag=10
#Network 10

auto bond0
iface bond0 inet manual
     ovs_bonds ens1f0np0 ens1f12np0
     ovs_type OVSBond
     ovs_bridge vmbr0
     ovs_mtu 9000
     ovs_options bond_mode=active-backup

auto vmbr0
iface vmbr0 inet manual
     ovs_type OVSBridge
     ovs_ports bond0 inband vlan10
     ovs_mtu 9000
#inband


Can some one help me if I set all correctly or not?

If someone have setup openvswitch with Bond interfaces 10GB share with 
me configuration.

Thank at lot.


Sergey TS
The best Regard

_______________________________________________
pve-user mailing list
pve-user at lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user