[PVE-User] OS Error after upgrade to 7.1

[Stefan Radman]

Hi Ralf

Would you mind to share the old and new firmware versions of your controller and your kernel version?

It might help other PVE users to avoid the problem you have run into.

Thank you

Stefan

> On Nov 24, 2021, at 11:24, Ralf Storm <ralf.storm at konzept-is.de> wrote:
> 
> Hello,
> 
> 
> Proxmox is starting again after upgrading the firmware of the 9211-8i controllers...
> 
> And yes it did boot with the old Kernel, so the Firmware of the controllers was incompatible with thie new Kernel.
> 
> 
> Ralf Storm
> 
> 
> Systemadministrator
> 
> 
> 
> Konzept Informationssysteme GmbH
> 
> Am 23.11.2021 um 14:37 schrieb Uwe Sauter:
>> Am 23.11.21 um 14:34 schrieb Ralf Storm:
>>> Hello,
>>> 
>>> 
>>> yes - I have a problem, as mentioned in my first mail, the system is stuck at boot with this message
>>> and then after a few minutes reboots...
>> Can you reboot with the previous kernel and check the firmware of the controller?
>> 
>> dmesg | grep mpt | grep -i fw
>> 
>> should show the firmware version.
>> 
>> 
>>> 
>>> Am 23/11/2021 um 14:14 schrieb Uwe Sauter:
>>>> Am 23.11.21 um 14:04 schrieb Ralf Storm:
>>>>> Hello,
>>>>> 
>>>>> I´m currently upgrading my 7-node Cluster, 1 node without problems, 2 nodes had renamed NICs to be
>>>>> corrected,
>>>>> 
>>>>> but the last Node stucks at boot with this message: "mpt2sas_cm0: overiding NVDATA EEDPTagMode
>>>>> setting"
>>>>> 
>>>>> Anybody had this error before?
>>>> Yes, unrelated to Proxmox. But the SAS controller works fine even with this message.
>>>> 
>>>> Do you have issues accessing your storage?
>>>> 
>>>>> Best regards
>>>>> 
>>>> _______________________________________________
>>>> pve-user mailing list
>>>> pve-user at lists.proxmox.com
>>>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> 
> _______________________________________________
> pve-user mailing list
> pve-user at lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user