[PVE-User] Adding an Internet NIC to existing Proxmox

Steve Frazier sfrazier1111 at yahoo.com
Mon Mar 1 15:52:07 CET 2021


 Sorry for rambling.
Allow me to run a single ethernet cable from my Proxmox (not sure which NIC) to a Netgear 
You gave me what I need, I am pretty sure.

I have (3) three NICs that I am using:
1. Internet2. 192.168.20.0/233. 192.168.30.0/24
In the configuration below, I believe this will do what I want which is: GS348T capable of doing VLANs.
I need 8 of the ports to go to VOIP phones (192.168.30.0) VLAN 30 , I want the be able to also use VLAN30 from the phone (which is capable of doing VLANS) and allow VLAN 20 to feed a workstation from the phone.
My question is which NIC do I run the single cable from the PROXMOX to a trunked port say port 48 of the GS348T Vlan Switch?
and to verify the configuration below is what I need to do this that you provided before.
Thanks very much!
STeve


    On Monday, March 1, 2021, 09:44:17 AM EST, Stefan M. Radman <smr at kmi.com> wrote:  
 
 Hi Steve
What exactly is the question you want to ask?
Stefan

On Feb 28, 2021, at 20:36, Steve Frazier <sfrazier1111 at yahoo.com> wrote:
I just purchased a Netgear 48 Port GS348T that will do VLANS.
Let's say I want to "trunk" VLAN 20/30 over to port 48 of the Netgear 48 Port switch, I would run a patch cord from what interface (NIC) below to port 48.  Then the (8) VOIP phones I need to do would need to trunk VLAN30 (VOIP) and VLAN20 (Computer) on say ports 1-8 and then I would just set the other ports for VLAN20 only just for VLAN20?
I am sorry to get so complicated but this is what I want to do and of course try and understand what I am doing as I do it.  I really appreciate all of your help.
I apologize for taking so long to get back to you, I am going to try and understand what you have shown me.

This is pretty much way over my head but I am trying to understand.
I have (6) Nic ports that I am using presently.  I have lost track of which NICs that I am using for what.  I come from the simple world of ETH0, ETH1, ETH3 and so on.
(1) Internet(2) 192.168.20.0/23(3) 192.168.30.0/24
Since you have shown me how to have an Internet NIC and then the two local Nets, my install is geting much more complicated.
I have added pfsense and wireguard into the mix throwing addition interfaces into the mix I assume, I will lay them out here:
enp11s0f1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether 00:15:17:23:f8:2f  txqueuelen 1000  (Ethernet)        RX packets 183025  bytes 45589221 (43.4 MiB)        RX errors 0  dropped 8672  overruns 0  frame 0        TX packets 30779  bytes 10977282 (10.4 MiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0        device interrupt 36  memory 0xfbee0000-fbf00000
enp9s0f0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether 00:15:17:d5:fb:8c  txqueuelen 1000  (Ethernet)        RX packets 10240813  bytes 12167243782 (11.3 GiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 4609529  bytes 739192943 (704.9 MiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0        device interrupt 38  memory 0xfbda0000-fbdc0000
enp9s0f1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether 00:15:17:d5:fb:8d  txqueuelen 1000  (Ethernet)        RX packets 313683820  bytes 439237907288 (409.0 GiB)        RX errors 0  dropped 36951  overruns 0  frame 0        TX packets 149752924  bytes 21229027987 (19.7 GiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0        device interrupt 40  memory 0xfbde0000-fbe00000
fwbr102i0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether 9e:b1:69:b1:fe:e5  txqueuelen 1000  (Ethernet)        RX packets 902886  bytes 135941047 (129.6 MiB)        RX errors 0  dropped 113  overruns 0  frame 0        TX packets 2  bytes 108 (108.0 B)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
fwbr105i0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether 12:66:90:e0:af:bb  txqueuelen 1000  (Ethernet)        RX packets 166586  bytes 11268544 (10.7 MiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 2  bytes 108 (108.0 B)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
fwbr105i1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether aa:f9:63:e1:e7:43  txqueuelen 1000  (Ethernet)        RX packets 902768  bytes 135930064 (129.6 MiB)        RX errors 0  dropped 111  overruns 0  frame 0        TX packets 2  bytes 108 (108.0 B)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
fwbr113i0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether ca:d5:29:71:50:67  txqueuelen 1000  (Ethernet)        RX packets 902578  bytes 135910861 (129.6 MiB)        RX errors 0  dropped 109  overruns 0  frame 0        TX packets 2  bytes 108 (108.0 B)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
fwln102i0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether 9e:b1:69:b1:fe:e5  txqueuelen 1000  (Ethernet)        RX packets 1228076  bytes 210823169 (201.0 MiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 334382  bytes 47442555 (45.2 MiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
fwln105i0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether 12:66:90:e0:af:bb  txqueuelen 1000  (Ethernet)        RX packets 7060111  bytes 11832514460 (11.0 GiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 4354033  bytes 678995200 (647.5 MiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
fwln105i1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether aa:f9:63:e1:e7:43  txqueuelen 1000  (Ethernet)        RX packets 5494888  bytes 873377923 (832.9 MiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 9998182  bytes 11985630904 (11.1 GiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
fwln113i0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether ca:d5:29:71:50:67  txqueuelen 1000  (Ethernet)        RX packets 156305554  bytes 428142574732 (398.7 GiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 137592593  bytes 9494602142 (8.8 GiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
fwpr102p0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether 9e:d6:11:e5:e9:0e  txqueuelen 1000  (Ethernet)        RX packets 334382  bytes 47442555 (45.2 MiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 1228076  bytes 210823169 (201.0 MiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
fwpr105p0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether e2:eb:af:2e:36:3b  txqueuelen 1000  (Ethernet)        RX packets 4354033  bytes 678995200 (647.5 MiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 7060111  bytes 11832514460 (11.0 GiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
fwpr105p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether 32:f1:86:8e:a4:5f  txqueuelen 1000  (Ethernet)        RX packets 9998182  bytes 11985630904 (11.1 GiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 5494888  bytes 873377923 (832.9 MiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
fwpr113p0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        ether 8a:b0:44:57:0c:98  txqueuelen 1000  (Ethernet)        RX packets 137592593  bytes 9494602142 (8.8 GiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 156305554  bytes 428142574732 (398.7 GiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536        inet 127.0.0.1  netmask 255.0.0.0        inet6 ::1  prefixlen 128  scopeid 0x10<host>        loop  txqueuelen 1000  (Local Loopback)        RX packets 1146862  bytes 145067314 (138.3 MiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 1146862  bytes 145067314 (138.3 MiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
tap102i0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST>  mtu 1500        ether ee:4b:07:09:21:40  txqueuelen 1000  (Ethernet)        RX packets 334381  bytes 47442501 (45.2 MiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 1228025  bytes 210819199 (201.0 MiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
tap105i0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST>  mtu 1500        ether 76:41:53:c5:f8:17  txqueuelen 1000  (Ethernet)        RX packets 4354032  bytes 678995146 (647.5 MiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 9927205  bytes 12012791415 (11.1 GiB)        TX errors 0  dropped 825 overruns 0  carrier 0  collisions 0
tap105i1: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST>  mtu 1500        ether 82:86:71:4b:4d:f2  txqueuelen 1000  (Ethernet)        RX packets 9998181  bytes 11985630850 (11.1 GiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 5573107  bytes 877795901 (837.1 MiB)        TX errors 0  dropped 2604 overruns 0  carrier 0  collisions 0
tap113i0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST>  mtu 1500        ether 42:d0:12:56:ad:37  txqueuelen 1000  (Ethernet)        RX packets 137592592  bytes 9494602088 (8.8 GiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 156304086  bytes 428142336375 (398.7 GiB)        TX errors 0  dropped 1420 overruns 0  carrier 0  collisions 0
vmbr0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        inet 192.168.20.2  netmask 255.255.254.0  broadcast 192.168.21.255        inet6 fe80::215:17ff:fed5:fb8d  prefixlen 64  scopeid 0x20<link>        ether 00:15:17:d5:fb:8d  txqueuelen 1000  (Ethernet)        RX packets 2155012  bytes 1062500000 (1013.2 MiB)        RX errors 0  dropped 115  overruns 0  frame 0        TX packets 1335320  bytes 339766917 (324.0 MiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
vmbr1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        inet6 public  prefixlen 64  scopeid 0x0<global>        inet6 fe80::215:17ff:fed5:fb8c  prefixlen 64  scopeid 0x20<link>        ether 00:15:17:d5:fb:8c  txqueuelen 1000  (Ethernet)        RX packets 166671  bytes 11273818 (10.7 MiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 175  bytes 15690 (15.3 KiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
vmbr2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        inet6 fe80::215:17ff:fe23:f82f  prefixlen 64  scopeid 0x20<link>        ether 00:15:17:23:f8:2f  txqueuelen 1000  (Ethernet)        RX packets 118684  bytes 28211461 (26.9 MiB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 62  bytes 4516 (4.4 KiB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
Thanks again for your time and your help.


On Tuesday, February 16, 2021, 05:57:01 PM EST, Steve Frazier via pve-user <pve-user at lists.proxmox.com> wrote:

Wow, thanks so much!  I will take a look and give it a try.  Thanks Stefan!
Steve

    On Tuesday, February 16, 2021, 05:40:38 PM EST, Stefan M. Radman <smr at kmi.com> wrote: 

Here you go.
See interface enp9s0f0 in the config below.It also shows how to run tagged (vmbr20,vmbr30) and untagged (vmbr10) traffic on the same trunk interface.
I normally use the VLAN tag ID as the bridge identifier (e.g. vmbr20 and vmbr30).The host IP would typically be on vmbr0 and thus on the native (untagged) VLAN.
Stefan
/etc/network/interfaces:

auto lo
iface lo inet loopback

iface enp9s0f1 inet manual
# Uplink for vmbr0

auto vmbr0
iface vmbr0 inet static
        address 192.168.20.2/23
        gateway 192.168.20.1
        bridge_ports enp9s0f1
        bridge_stp off
        bridge_fd 0
# Host Management

iface enp11s0f0 inet manual
# Uplink for vmbr1

auto vmbr1
iface vmbr1 inet manual
        bridge_ports enp9s0f0
        bridge_stp off
        bridge_fd 0
# Bridge for VMs on the Internet

iface enp11s0f1 inet manual
# Uplink for vmbr2

auto vmbr2
iface vmbr2 inet manual
        bridge_ports enp11s0f1
        bridge_stp off
        bridge_fd 0
# Bridge for VMs on network 192.168.30.0/24

iface enp9s0f0 inet manual# Trunk interface carrying VLAN20 and VLAN30
auto vmbr10iface vmbr10 inet manual
        bridge_ports enp9s0f0
        bridge_stp off
        bridge_fd 0
# Bridge for untagged traffic on trunk interface
auto vmbr20iface vmbr20 inet manual
        bridge_ports enp9s0f0.20
        bridge_stp off
        bridge_fd 0
# Bridge for VMs on VLAN20
auto vmbr30iface vmbr30 inet manual
        bridge_ports enp9s0f0.30
        bridge_stp off
        bridge_fd 0
# Bridge for VMs on VLAN30
iface enp3s0 inet manual
iface enp2s0 inet manual



On Feb 16, 2021, at 21:52, Steve Frazier <sfrazier1111 at yahoo.com> wrote:
Tried it and it worked as you explained!  Thanks Stefan.  I am taking this step by step.I haven't tried the 192.168.30.0 nic yet but will shortly.
I will want to be able to trunk VLAN 20 and VLAN 30 down a NIC so that I will be able to use my VOIP phones on VLAN30 and be able to offer VLAN20 for the attached work stations, any suggestions and/or configuration file to do this?
Thanks again for your help!


On Tuesday, February 16, 2021, 01:52:54 PM EST, Stefan M. Radman <smr at kmi.com> wrote:

Hi Steve
Attached and below is an /etc/network/interfaces that should do what you want.
Just* keep interface enp9s0f1 connected to your private subnet 192.168.20.2/23* connect interface enp9s0f0 to your internet subnet* connect internet VMs to vmbr1* connect interface enp11s0f1 to your private subnet 192.168.30.2/23* connect VMs on subnet 192.168.30.2/23 to vmbr2 If you keep the comment lines (#) they'll show up in the web interface as well.
Disclaimer: I did not test it but it should give you the right idea to go ahead.
Stefan
/etc/network/interfaces:
auto loiface lo inet loopback
iface enp9s0f1 inet manual# Uplink for vmbr0
auto vmbr0iface vmbr0 inet static        address 192.168.20.2/23        gateway 192.168.20.1        bridge_ports enp9s0f1        bridge_stp off        bridge_fd 0# Host Management
iface enp11s0f0 inet manual# Uplink for vmbr1
auto vmbr1iface vmbr1 inet manual        bridge_ports enp9s0f0        bridge_stp off        bridge_fd 0# Bridge for VMs on the Internet
iface enp11s0f1 inet manual# Uplink for vmbr2
auto vmbr2iface vmbr2 inet manual        bridge_ports enp11s0f1        bridge_stp off        bridge_fd 0# Bridge for VMs on network 192.168.30.0/24
iface enp9s0f0 inet manual
iface enp3s0 inet manual
iface enp2s0 inet manual


On Feb 14, 2021, at 18:29, Steve Frazier via pve-user <pve-user at lists.proxmox.com> wrote:

From:Steve Frazier <sfrazier1111 at yahoo.com>
Subject:Re: [PVE-User] Adding an Internet NIC to existing Proxmox
Date:February 14, 2021 at 18:29:14 GMT+1
To:"pve-user at lists.proxmox.com" <pve-user at lists.proxmox.com>


Here is my "interfaces" file:
auto loiface lo inet loopback
iface enp9s0f1 inet manual
auto vmbr0iface vmbr0 inet static        address 192.168.20.2/23        gateway 192.168.20.1        bridge_ports enp9s0f1        bridge_stp off        bridge_fd 0
iface enp11s0f0 inet manual
iface enp11s0f1 inet manual
iface enp9s0f0 inet manual
iface enp3s0 inet manual
iface enp2s0 inet manual


   On Sunday, February 14, 2021, 12:14:28 PM EST, Steve Frazier via pve-user <pve-user at lists.proxmox.com> wrote:  

I need some help.  I am new to Proxmox.   I have it set up now using (1) one NIC to an internal network of 192.168.20.0/23 and I would like to use another NIC I have available for the internet which has (5) available IPs.
I have attached a view of my existing network.
I would like to set up an additional (NIC) when would allow me to assign to a virtual server that has two virtual NICs with one being the internet and the other being my internal network.
While I am at it, I have another networking 192.168.30.0/24 that I would like to assign to an available NIC so that I could assign virtual servers to that NICat a later time.
Could someone please help me on how to do this
Thanks very much.


_______________________________________________
pve-user mailing list
pve-user at lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user


_______________________________________________
pve-user mailing list
pve-user at lists.proxmox.com
https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.proxmox.com%2Fcgi-bin%2Fmailman%2Flistinfo%2Fpve-user&data=04%7C01%7Csmr%40kmi.com%7Cfb3db335b1844cd9162208d8d10e1613%7Cc2283768b8d34e008f3d85b1b4f03b33%7C0%7C0%7C637489205732810378%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=bbtAAx1zpomz3hCKtKmrW3UIFF6iyprwmGcer1Q0njQ%3D&reserved=0




CONFIDENTIALITY NOTICE: This communication may contain privileged and confidential information, or may otherwise be protected from disclosure, and is intended solely for use of the intended recipient(s). If you are not the intended recipient of this communication, please notify the sender that you have received this communication in error and delete and destroy all copies in your possession.




CONFIDENTIALITY NOTICE:This communication may contain privileged and confidential information, or may otherwise be protected from disclosure, and is intended solely for use of the intended recipient(s). If you are not the intended recipient of this communication, please notify the sender that you have received this communication in error and delete and destroy all copies in your possession.
  
_______________________________________________
pve-user mailing list
pve-user at lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user




CONFIDENTIALITY NOTICE:This communication may contain privileged and confidential information, or may otherwise be protected from disclosure, and is intended solely for use of the intended recipient(s). If you are not the intended recipient of this communication, please notify the sender that you have received this communication in error and delete and destroy all copies in your possession.
  


More information about the pve-user mailing list