[PVE-User] UEFI - Proxmox

[lord_Niedzwiedz]

I start Proxmox on UEFI in disk /dev/sda on LVM.
Its start correctly.

But i try this same on nvme and not work  ;-/
> I've noticed that if your system boots in UEFI mode and you choose ZFS
> during installation, Proxmox installs ZFS and an UEFI boot partition. This
> does then not boot afterwards, without warnings of errors.
>
> I believe that Proxmox does not support ZFS in combination with UEFI. You
> have to use ext4/lvm instead, or boot in BIOS mode.
>
> Hope this helps, Arjen
>
> On Thu, Mar 21, 2019, 16:16 Alain Péan <alain.pean at c2n.upsaclay.fr> wrote:
>
>> Le 21/03/2019 à 09:16, lord_Niedzwiedz a écrit :
>>> A heave only UEFI bios in serwer.
>>>
>>> How I make start Proxmox ?
>>>
>>> I install it, but Proxmox not start  ;-/
>>>
>>> Any ideas ?
>> I am using UEFI with newer servers. It works without problem. For
>> example, I have the boot/efi partition :
>> # cat /etc/fstab
>> # <file system> <mount point> <type> <options> <dump> <pass>
>> /dev/pve/root / ext4 errors=remount-ro 0 1
>> UUID=CF7B-601B /boot/efi vfat defaults 0 1
>> /dev/pve/swap none swap sw 0 0
>> proc /proc proc defaults 0 0
>>
>> With usual servers (I have Dell ones), you have the choice in the BIOS
>> between lagacy BIOS or UEFI. Just choose UEFI, then boot with the last
>> proxmox ve iso. If you don't have the choice, only UEEFI, just boot the
>> iso and proceed with the installation, which is largely automated.
>>
>> Alain
>>
>> --
>> Administrateur Système/Réseau
>> C2N Centre de Nanosciences et Nanotechnologies (UMR 9001)
>> Boulevard Thomas Gobert (ex Avenue de La Vauve), 91920 Palaiseau
>> Tel : 01-70-27-06-88 Bureau A255
>>
>> _______________________________________________
>> pve-user mailing list
>> pve-user at pve.proxmox.com
>> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user