[PVE-User] UEFI - Proxmox

[lord_Niedzwiedz]

>> A heave only UEFI bios in serwer.
>>
>> How I make start Proxmox ?
>>
>> I install it, but Proxmox not start  ;-/
>>
>> Any ideas ? 
>
> I am using UEFI with newer servers. It works without problem. For 
> example, I have the boot/efi partition :
> # cat /etc/fstab
> # <file system> <mount point> <type> <options> <dump> <pass>
> /dev/pve/root / ext4 errors=remount-ro 0 1
> UUID=CF7B-601B /boot/efi vfat defaults 0 1
> /dev/pve/swap none swap sw 0 0
> proc /proc proc defaults 0 0
>
> With usual servers (I have Dell ones), you have the choice in the BIOS 
> between lagacy BIOS or UEFI. Just choose UEFI, then boot with the last 
> proxmox ve iso. If you don't have the choice, only UEEFI, just boot 
> the iso and proceed with the installation, which is largely automated.
>
> Alain
When I install Proxmox i heave partition like this:
Device                     Start    End                   Sectors     
         Size         Type
/dev/nvme0n1p1       34      2047              2014 1007K        BIOS - boot
/dev/nvme0n1p2     2048   1050623         1048576            512M       
System EFI
/dev/nvme0n1p3  1050624 976773134     975722511       465,3G Linux LVM

But the system does not start