[PVE-User] Proxmox 5 (LACP/Bridge/VLAN120)

[Uwe Sauter]

An example out of my head:


/etc/network/interfaces
-----------------------------------------
# management interface
auto eth0
iface eth0 inet static
  address 10.100.100.8
  netmask 255.255.255.0
  gateway 10.100.100.254

# 1st interface in bond
auto eth1
iface eth1 inet manual
  mtu 9000

# 2nd interface in bond
auto eth2
iface eth2 inet manual
  mtu 9000

# bond
auto bond0
iface bond0 inet manual
  slaves eth1 eth2
  bond-mode 802.3ad
  bond-miimon 100
  mtu 9000

# interface for vlan 120 on bond with IP
auto bond0.120
iface bond0.120 inet static
  address 192.168.123.2
  netmask 255.255.255.0
  mtu 9000

# interface for vlan 130 on bond without IP (just for VMs)
auto bond0.130
iface bond0.130 inet manual

-----------------------------------------


Am 23.08.2017 um 06:44 schrieb Alexandre DERUMIER:
> Hi,
> 
> you can create a bond0.120 interface and setup ip on it.
> 
> (and keep bond0 in bridge).
> 
> 
> another way, enable "vlan aware" option in bridge. (see gui),
> 
> then you can create a
> 
> vmbr0.120, and setup ip on it.
> 
> 
> ----- Mail original -----
> De: "Devin Acosta" <devin at pabstatencio.com>
> À: "proxmoxve" <pve-user at pve.proxmox.com>
> Envoyé: Mercredi 23 Août 2017 03:40:07
> Objet: [PVE-User] Proxmox 5 (LACP/Bridge/VLAN120)
> 
> I need to configure Proxmox 5.x with the following. 
> 
> Bond of 2 interfaces using LACP 
> Bridge off Bond0, with IP on VLAN 120 (10.100.100.8/24) 
> The network switch doesn’t have native VLAN, so the IP has to be on the 
> TAGGED VLAN 120. 
> 
> Please help. ;) 
> 
> Devin 
> _______________________________________________ 
> pve-user mailing list 
> pve-user at pve.proxmox.com 
> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user 
> 
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>