[PVE-User] VLAN and 4.2 upgrade

[lyt_yudi]

hi

recommend you use this mode:

http://pve.proxmox.com/wiki/Open_vSwitch <http://pve.proxmox.com/wiki/Open_vSwitch>

Example 2: Bond + Bridge + Internal Ports


> 在 2016年5月6日，下午4:59，Laurent CARON <lcaron at unix-scripts.info> 写道：
> 
> Hi,
> 
> I'm running a 3.4 cluster and am planning the upgrade.
> 
> It seem the vlan package will be removed upon upgrade (vlan is in conflict with pve-manager).
> 
> I've got the following /etc/network/interfaces config (on proxmox hosts):
> 
> auto bond1
> iface bond1 inet manual
>        slaves eth8 eth9
>        bond-miimon 100
>        bond-downdelay 200
>        bond-updelay 200
>        bond-mode 802.3ad
> 
> auto vlan34
> iface vlan34 inet manual
>        vlan-raw-device bond1
> 
> auto vmbr34
> iface vmbr34 inet manual
>        bridge_ports vlan34
>        bridge_stp off
>        bridge_fd 0
> 
> The ports on the switch are trunk ports carrying all VLANs used by my VMs.
> 
> I'm then using vmbr34 interface as a network interface on my hosts.
> 
> Will it be supported with proxmox 4 (since the vlan package will be removed) ?
> 
> Thanks
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user