[PVE-User] pvecm e 1 not working anymore

[Jean-Laurent Ivars]

Honestly I don’t see the point of your message, you basically show the same as i did, unless the fact that you have tree servers in your cluster, my servers are hosted so i’m very sorry but I can’t pull or plug a cable…

Yes in this configuration, i only have a two hosts cluster and I know it is not made for activate HA that’s why i do not.

And as far as I know I didn’t blamed anyone so I don’t understand the tone of your mail. (saying hi, thank or regards doesn’t hurt i assure you) 
I’m seriously wondering about buying subscription with support level and you’re not helping me... 

Regards,

	
Jean-Laurent Ivars 
Responsable Technique | Technical Manager
22, rue Robert - 13007 Marseille 
Tel: 09 84 56 64 30 - Mobile: 06.52.60.86.47 
Linkedin <http://fr.linkedin.com/in/jlivars/>   |  Viadeo <http://www.viadeo.com/fr/profile/jean-laurent.ivars>   |  www.ipgenius.fr <https://www.ipgenius.fr/>
> Le 18 mars 2016 à 13:20, Thomas Lamprecht <t.lamprecht at proxmox.com> a écrit :
> 
> 
> 
> On 03/18/2016 12:36 PM, Jean-Laurent Ivars wrote:
>> You can let go it’s ok, I revert the conf file from my other node, I restarted the corosync service from the web interface and the folder is back.
>> 
>> As you’re saying pvecm expected 1 is working despite what pvecm status says because both the hosts are online, I just made test (temporary deactivate cluster interface on the other node)
> 
> If you did something like "ifdown eth1" forget it , that wont work with corosync, it may actual cause problems.
> And yes it will *not* set expected votes lower if the cluster is full up and quorate!
> 
> A real test from my side shows that is working:
> 
> root at due:~# pvecm s
> Quorum information
> ------------------
> Date:             Fri Mar 18 13:15:42 2016
> Quorum provider:  corosync_votequorum
> Nodes:            3
> Node ID:          0x00000002
> Ring ID:          704
> Quorate:          Yes
> 
> Votequorum information
> ----------------------
> Expected votes:   3
> Highest expected: 3
> Total votes:      3
> Quorum:           2  
> Flags:            Quorate 
> 
> Membership information
> ----------------------
>     Nodeid      Votes Name
> 0x00000001          1 10.10.10.1
> 0x00000002          1 10.10.10.2 (local)
> 0x00000003          1 10.10.10.3
> 
> *-> pull network plug here*
> 
> root at due:~# pvecm s
> Quorum information
> ------------------
> Date:             Fri Mar 18 13:15:46 2016
> Quorum provider:  corosync_votequorum
> Nodes:            1
> Node ID:          0x00000002
> Ring ID:          708
> Quorate:          No
> 
> Votequorum information
> ----------------------
> Expected votes:   3
> Highest expected: 3
> Total votes:      1
> Quorum:           2 Activity blocked
> Flags:            
> 
> Membership information
> ----------------------
>     Nodeid      Votes Name
> 0x00000002          1 10.10.10.2 (local)
> 
> root at due:~# pvecm e 1
> 
> root at due:~# pvecm s
> Quorum information
> ------------------
> Date:             Fri Mar 18 13:15:51 2016
> Quorum provider:  corosync_votequorum
> Nodes:            1
> Node ID:          0x00000002
> Ring ID:          708
> Quorate:          Yes
> 
> Votequorum information
> ----------------------
> Expected votes:   1
> Highest expected: 1
> Total votes:      1
> Quorum:           1  
> Flags:            Quorate 
> 
> Membership information
> ----------------------
>     Nodeid      Votes Name
> 0x00000002          1 10.10.10.2 (local)
> root at due:~# 
> 
> 
> btw. using that do a achieve some false sense of HA in a two node cluster should *never* be done in a production system, if something fails or does not work as expected do not blame us, we warned you. If you want HA use at least three nodes.
> 
>> 
>> and voilà :
>> 
>> root at roubaix /etc/pve # pvecm status
>> Quorum information
>> ------------------
>> Date:             Fri Mar 18 12:32:44 2016
>> Quorum provider:  corosync_votequorum
>> Nodes:            1
>> Node ID:          0x00000001
>> Ring ID:          1504
>> Quorate:          No
>> 
>> Votequorum information
>> ----------------------
>> Expected votes:   2
>> Highest expected: 2
>> Total votes:      1
>> Quorum:           2 Activity blocked
>> Flags:            
>> 
>> Membership information
>> ----------------------
>>     Nodeid      Votes Name
>> 0x00000001          1 10.10.10.2 (local)
>> root at roubaix /etc/pve # pvecm expected 1
>> root at roubaix /etc/pve # pvecm status
>> Quorum information
>> ------------------
>> Date:             Fri Mar 18 12:33:00 2016
>> Quorum provider:  corosync_votequorum
>> Nodes:            1
>> Node ID:          0x00000001
>> Ring ID:          1504
>> Quorate:          Yes
>> 
>> Votequorum information
>> ----------------------
>> Expected votes:   1
>> Highest expected: 1
>> Total votes:      1
>> Quorum:           1  
>> Flags:            Quorate 
>> 
>> Membership information
>> ----------------------
>>     Nodeid      Votes Name
>> 0x00000001          1 10.10.10.2 (local)
>> root at roubaix /etc/pve #  
>> 
>> Thank you
>> 
>> 
>> 
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com <mailto:pve-user at pve.proxmox.com>
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user <http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20160318/6ab385c1/attachment.htm>