[PVE-User] Problems with running Pve under the New Hetzner Rootserver Generation with Haswell

[Amand Tihon]

Hi,

Has a solution or workaround been found ? I'm also seeing my EX40 hanging, but 
I don't have access to the hetzner forum yet (my account must still be 
activated).

Thanks.

Amand.

Le jeudi 18 juillet 2013 16:05:09  a écrit :
> Hi Martin,
> 
> same Problem. 2.6.32-22-pve is running but hangs after a short period of
> time, no log entries. After a reset the server comes up again.
> I've no idea if a installation is impossible or not, we're using wheezy
> on the base. Based on this tut:
> http://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Wheezy
> 
> chris
> 
> Am 18.07.13 15:06, schrieb Martin Maurer:
> > Pls test with latest 2.6.32-22 kernel, see
> > http://forum.proxmox.com/threads/14269-No-Installation-possible-Haswell-Xe
> > on-1225v3-X10SLM-F-Supermicro
> > 
> > 
> > 
> > Martin
> > 
> > 
> > 
> > *From:*pve-user-bounces at pve.proxmox.com
> > [mailto:pve-user-bounces at pve.proxmox.com] *On Behalf Of *Christain
> > Blaich *Sent:* Donnerstag, 18. Juli 2013 11:33
> > *To:* pve-user at pve.proxmox.com
> > *Subject:* [PVE-User] Problems with running Pve under the New Hetzner
> > Rootserver Generation with Haswell
> > 
> > 
> > 
> > Hey,
> > 
> > I got a new RootServer from the new Hetzner Generation called EX40
> > http://www.hetzner.de/hosting/produktmatrix/rootserver-produktmatrix-ex
> > Unfortunately  the Server does not start with 2.6.32-20-pve stable.
> > 2.6.32-21-pve dev is running but hangs after a short period of time,
> > no log entries. After a reset the server comes up again.
> > 2.6.32-22-pve dev same like 21.
> > 
> > model name    : Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
> > root at Debian-70-wheezy-64-minimal ~ # lspci
> > 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
> > 00:02.0 VGA compatible controller: Intel Corporation Haswell
> > Integrated Graphics Controller (rev 06)
> > 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host
> > Controller (rev 04)
> > 00:16.0 Communication controller: Intel Corporation Lynx Point MEI
> > Controller #1 (rev 04)
> > 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host
> > Controller #2 (rev 04)
> > 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port
> > #1 (rev d4)
> > 00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)
> > 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host
> > Controller #1 (rev 04)
> > 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04)
> > 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA
> > Controller 1 [AHCI mode] (rev 04)
> > 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04)
> > 02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI
> > Bridge (rev 03)
> > 03:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit
> > Ethernet Controller (rev 05)
> > 
> > Hw should be ok and is tested. Other useres are fighting with the same
> > errors.
> > See http://forum.hetzner.de/wbb2/thread.php?threadid=20291
> > 
> > Any Ideas ?
> > 
> > Thx, chris
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://pve.proxmox.com/pipermail/pve-user/attachments/20130718/14e2a050/at
> tachment.html>