[PVE-User] Problems with running Pve under the New Hetzner Rootserver Generation with Haswell

[Christain Blaich]

Hi Martin,

same Problem. 2.6.32-22-pve is running but hangs after a short period of
time, no log entries. After a reset the server comes up again.
I've no idea if a installation is impossible or not, we're using wheezy
on the base. Based on this tut:
http://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Wheezy

chris

Am 18.07.13 15:06, schrieb Martin Maurer:
>
> Pls test with latest 2.6.32-22 kernel, see
> http://forum.proxmox.com/threads/14269-No-Installation-possible-Haswell-Xeon-1225v3-X10SLM-F-Supermicro
>
>  
>
> Martin
>
>  
>
> *From:*pve-user-bounces at pve.proxmox.com
> [mailto:pve-user-bounces at pve.proxmox.com] *On Behalf Of *Christain Blaich
> *Sent:* Donnerstag, 18. Juli 2013 11:33
> *To:* pve-user at pve.proxmox.com
> *Subject:* [PVE-User] Problems with running Pve under the New Hetzner
> Rootserver Generation with Haswell
>
>  
>
> Hey,
>
> I got a new RootServer from the new Hetzner Generation called EX40
> http://www.hetzner.de/hosting/produktmatrix/rootserver-produktmatrix-ex
> Unfortunately  the Server does not start with 2.6.32-20-pve stable.
> 2.6.32-21-pve dev is running but hangs after a short period of time,
> no log entries. After a reset the server comes up again.
> 2.6.32-22-pve dev same like 21.
>
> model name    : Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
> root at Debian-70-wheezy-64-minimal ~ # lspci
> 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
> 00:02.0 VGA compatible controller: Intel Corporation Haswell
> Integrated Graphics Controller (rev 06)
> 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host
> Controller (rev 04)
> 00:16.0 Communication controller: Intel Corporation Lynx Point MEI
> Controller #1 (rev 04)
> 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host
> Controller #2 (rev 04)
> 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port
> #1 (rev d4)
> 00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)
> 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host
> Controller #1 (rev 04)
> 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04)
> 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA
> Controller 1 [AHCI mode] (rev 04)
> 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04)
> 02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI
> Bridge (rev 03)
> 03:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit
> Ethernet Controller (rev 05)
>
> Hw should be ok and is tested. Other useres are fighting with the same
> errors.
> See http://forum.hetzner.de/wbb2/thread.php?threadid=20291
>
> Any Ideas ?
>
> Thx, chris
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20130718/14e2a050/attachment.htm>