[PVE-User] why /etc/pve/storage.cfg is read-only?

[para zheng]

ok. thanks.


2012/10/22 Dietmar Maurer <dietmar at proxmox.com>:
> I suggest you simply reinstall that node (to make sure all cluster keys/data are removed).
>
>> -----Original Message-----
>> From: para zheng [mailto:para.pve at gmail.com]
>> Sent: Montag, 22. Oktober 2012 08:31
>> To: Dietmar Maurer
>> Cc: pve-user at pve.proxmox.com
>> Subject: Re: [PVE-User] why /etc/pve/storage.cfg is read-only?
>>
>> There are 4 PVE nodes in my old cluster.
>> Now I want to use one of them(node-3) to test with new ceph cluster.
>> What need I do with the node-3 if I want to use it separated with the original
>> cluster?
>>
>> I just use  "pmxcfs -l" to run the node in local mode, but when I create the
>> VM  with ceph, there is another error "TASK ERROR: create failed - rbd error:
>> global_init: error reading config file.".
>>
>> 2012/10/22 Dietmar Maurer <dietmar at proxmox.com>:
>> > Your cluster is not quorate?
>> >
>> >> -----Original Message-----
>> >> From: pve-user-bounces at pve.proxmox.com [mailto:pve-user-
>> >> bounces at pve.proxmox.com] On Behalf Of para zheng
>> >> Sent: Montag, 22. Oktober 2012 07:26
>> >> To: pve-user at pve.proxmox.com
>> >> Subject: [PVE-User] why /etc/pve/storage.cfg is read-only?
>> >>
>> >> Dear all:
>> >>
>> >>      When adding CEPH as the storage, i want to add configs in the
>> >> /etc/pve/storage.cfg, but I found these files are read-only.
>> >>
>> >> # ls -l storage.cfg
>> >> -r--r----- 1 root www-data 357 Jun 25 12:35 storage.cfg
>> >>
>> >> Then I use "mount -o rw" remount it to make it wriable, but it does
>> >> not make any sense.
>> >>
>> >> And use df comand, found :
>> >> # df -h | grep /etc/pve
>> >> /dev/fuse              30M   72K   30M   1% /etc/pve
>> >>
>> >> here are pve version:
>> >>
>> >> #peversion -v
>> >> pve-manager: 2.2-21 (pve-manager/2.2/8f343d5a) running kernel:
>> >> 2.6.32-16- pve
>> >> proxmox-ve-2.6.32: 2.2-79
>> >> pve-kernel-2.6.32-11-pve: 2.6.32-66
>> >> pve-kernel-2.6.32-16-pve: 2.6.32-79
>> >> pve-kernel-2.6.32-12-pve: 2.6.32-68
>> >> lvm2: 2.02.95-1pve2
>> >> clvm: 2.02.95-1pve2
>> >> corosync-pve: 1.4.4-1
>> >> openais-pve: 1.1.4-2
>> >> libqb: 0.10.1-2
>> >> redhat-cluster-pve: 3.1.93-1
>> >> resource-agents-pve: 3.9.2-3
>> >> fence-agents-pve: 3.1.9-1
>> >> pve-cluster: 1.0-28
>> >> qemu-server: 2.0-59
>> >> pve-firmware: 1.0-20
>> >> libpve-common-perl: 1.0-35
>> >> libpve-access-control: 1.0-25
>> >> libpve-storage-perl: 2.0-33
>> >> vncterm: 1.0-3
>> >> vzctl: 4.0-1pve2
>> >> vzprocps: 2.0.11-2
>> >> vzquota: 3.1-1
>> >> pve-qemu-kvm: 1.2-6
>> >> ksm-control-daemon: 1.1-1
>> >>
>> >> I do not know why this happen. I had used to test ceph in VE few days
>> ago.
>> >> Thanks for your replies and free sharing.
>> >> _______________________________________________
>> >> pve-user mailing list
>> >> pve-user at pve.proxmox.com
>> >> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>> >
>> >
>
>