[PVE-User] why /etc/pve/storage.cfg is read-only?

[Dietmar Maurer]

I suggest you simply reinstall that node (to make sure all cluster keys/data are removed). 

> -----Original Message-----
> From: para zheng [mailto:para.pve at gmail.com]
> Sent: Montag, 22. Oktober 2012 08:31
> To: Dietmar Maurer
> Cc: pve-user at pve.proxmox.com
> Subject: Re: [PVE-User] why /etc/pve/storage.cfg is read-only?
> 
> There are 4 PVE nodes in my old cluster.
> Now I want to use one of them(node-3) to test with new ceph cluster.
> What need I do with the node-3 if I want to use it separated with the original
> cluster?
> 
> I just use  "pmxcfs -l" to run the node in local mode, but when I create the
> VM  with ceph, there is another error "TASK ERROR: create failed - rbd error:
> global_init: error reading config file.".
> 
> 2012/10/22 Dietmar Maurer <dietmar at proxmox.com>:
> > Your cluster is not quorate?
> >
> >> -----Original Message-----
> >> From: pve-user-bounces at pve.proxmox.com [mailto:pve-user-
> >> bounces at pve.proxmox.com] On Behalf Of para zheng
> >> Sent: Montag, 22. Oktober 2012 07:26
> >> To: pve-user at pve.proxmox.com
> >> Subject: [PVE-User] why /etc/pve/storage.cfg is read-only?
> >>
> >> Dear all:
> >>
> >>      When adding CEPH as the storage, i want to add configs in the
> >> /etc/pve/storage.cfg, but I found these files are read-only.
> >>
> >> # ls -l storage.cfg
> >> -r--r----- 1 root www-data 357 Jun 25 12:35 storage.cfg
> >>
> >> Then I use "mount -o rw" remount it to make it wriable, but it does
> >> not make any sense.
> >>
> >> And use df comand, found :
> >> # df -h | grep /etc/pve
> >> /dev/fuse              30M   72K   30M   1% /etc/pve
> >>
> >> here are pve version:
> >>
> >> #peversion -v
> >> pve-manager: 2.2-21 (pve-manager/2.2/8f343d5a) running kernel:
> >> 2.6.32-16- pve
> >> proxmox-ve-2.6.32: 2.2-79
> >> pve-kernel-2.6.32-11-pve: 2.6.32-66
> >> pve-kernel-2.6.32-16-pve: 2.6.32-79
> >> pve-kernel-2.6.32-12-pve: 2.6.32-68
> >> lvm2: 2.02.95-1pve2
> >> clvm: 2.02.95-1pve2
> >> corosync-pve: 1.4.4-1
> >> openais-pve: 1.1.4-2
> >> libqb: 0.10.1-2
> >> redhat-cluster-pve: 3.1.93-1
> >> resource-agents-pve: 3.9.2-3
> >> fence-agents-pve: 3.1.9-1
> >> pve-cluster: 1.0-28
> >> qemu-server: 2.0-59
> >> pve-firmware: 1.0-20
> >> libpve-common-perl: 1.0-35
> >> libpve-access-control: 1.0-25
> >> libpve-storage-perl: 2.0-33
> >> vncterm: 1.0-3
> >> vzctl: 4.0-1pve2
> >> vzprocps: 2.0.11-2
> >> vzquota: 3.1-1
> >> pve-qemu-kvm: 1.2-6
> >> ksm-control-daemon: 1.1-1
> >>
> >> I do not know why this happen. I had used to test ceph in VE few days
> ago.
> >> Thanks for your replies and free sharing.
> >> _______________________________________________
> >> pve-user mailing list
> >> pve-user at pve.proxmox.com
> >> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> >
> >