[PVE-User] Openfiler iscsi problem

[Alain Péan]

Le 25/03/2011 23:42, Yılmaz Bilgili a écrit :
> 25-03-2011 23:51 tarihinde, Alain Péan yazdı:
>> Hi Yilmaz,
> Hi Alain,
>
> Replying to list.

I aplogize for the error. I wanted to reply to list.
>
>>
>> The interface hangs and time out when there is a problem to access a
>> device. You have to do some tests at the comand line to discover what
>> is wronk. Look also in your logs.
>>
>> What says for your iscsi target :
>> # iscsiadm -m discovery -t sendtargets -p IP_of_target
>>
>> Alain
>
> Thank you for your quick reply.
>
> Here is the test:
>
> # iscsiadm -m discovery -t sendtargets -p 10.10.10.4
> 192.168.18.11:3260,1 iqn.2006-01.com.openfiler:tsn.9c7dd34c864f
> 10.10.10.4:3260,1 iqn.2006-01.com.openfiler:tsn.9c7dd34c864f
>
> I have two networks and openfiler connected to both. May it cause this
> problem ?

I don't know exactly, but it seems strange to me. Do you need the two IP 
addresses ? Can you try with only one ?

Also it is recommended to have your iSCSI storage on a separate network 
from other traffic. Is it your case ? And finnally, it is best to use 
jumbo frames, that is MTU=9000, but on both ends, on each interfaces.

On my servers, I have at least two network interfaces, and I use the 
second one (eth1) for iSCSI traffic, with MTU=9000, and a different 
switch (or Vlan)...

Hope this helps...

Regards,
Alain
>
> Regards.
>
>
>
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user