[PVE-User] Cluster nodes in different subnets/VLANs

[Dietmar Maurer]

That config look quite strange to me - vmbr0 should use the same vlan on both nodes, also vmbr1 should use the same vlan on both nodes.


From: Manu Lestrelin [mailto:emmanuel.lestrelin at univmed.fr]
Sent: Mittwoch, 09. Dezember 2009 12:00
To: Dietmar Maurer
Cc: pve-user at pve.proxmox.com
Subject: Re: [PVE-User] Cluster nodes in different subnets/VLANs

On master cluster node :

# network interface settings

auto lo

iface lo inet loopback



iface eth0 inet manual



auto vmbr0

iface vmbr0 inet static

    address  192.168.100.4

    netmask  255.255.255.0

    gateway  192.168.100.1

    bridge_ports eth0

    bridge_stp off

    bridge_fd 0



auto vmbr1

iface vmbr1 inet manual

    bridge_ports eth0.200

    bridge_stp off

    bridge_fd 0
On slave cluster node :

# network interface settings

auto lo

iface lo inet loopback



iface eth0 inet manual



auto vmbr0

iface vmbr0 inet manual

    bridge_ports eth0.100

    bridge_stp off

    bridge_fd 0



auto vmbr1

iface vmbr1 inet static

    address  192.168.200.220

    netmask  255.255.255.0

    gateway  192.168.200.1

    bridge_ports eth0

    bridge_stp off

    bridge_fd 0

Dietmar Maurer a écrit :

This error is certainly due to the fact that vmbr0 does not have any

defined gateway : as stated in Cluster.pm line 182, $localip is defined

like this :

    my $localip = $ifaces->{vmbr0}->{address} || $ifaces->{eth0}-



{address};





So what network config do you use now? (/etc/network/interfaces)







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20091209/1bacece6/attachment.htm>