[pve-devel] [PATCH pve-kernel-meta 3/5] proxmox-boot: refresh based on bootloader config instead of bootmode
Fabian Grünbichler
f.gruenbichler at proxmox.com
Wed Feb 16 12:31:43 CET 2022
On February 14, 2022 4:57 pm, Stoiko Ivanov wrote:
> ignore the current bootmode (uefi/legacy) when deciding which configs
> to generate - make this decision based on the found boot loader
> configs on the ESP.
>
> Change systemd-boot to load the kernel+initrd from the ESPs root where
> grub needs them. This prevents the double use of space for systems
> having both boot-loaders present (since FAT does not support
> symlinks). While this is against the recommendations of the
> boot-loader-specification [0]) it works fine (and we deviate from [0]
> by not having the machine-id in the kernel subdirs anyways).
> The UEFI spec on the directory structure [1], also should be fine with
> it.
>
> Additionally adapt the output of `p-b-t status` to the new paths
>
> [0] https://systemd.io/BOOT_LOADER_SPECIFICATION/
> [1] section 13.3.1.3 of
> https://uefi.org/sites/default/files/resources/UEFI_Spec_2_9_2021_03_18.pdf
>
> Signed-off-by: Stoiko Ivanov <s.ivanov at proxmox.com>
> ---
> bin/proxmox-boot-tool | 14 +++----
> proxmox-boot/zz-proxmox-boot | 78 ++++++++++++------------------------
> 2 files changed, 32 insertions(+), 60 deletions(-)
>
> diff --git a/bin/proxmox-boot-tool b/bin/proxmox-boot-tool
> index 5197f5b..320f49b 100755
> --- a/bin/proxmox-boot-tool
> +++ b/bin/proxmox-boot-tool
> @@ -396,20 +396,18 @@ _status_detail() {
>
> result=""
> if [ -f "${mountpoint}/$PMX_LOADER_CONF" ]; then
> - if [ ! -d "${mountpoint}/$PMX_ESP_DIR" ]; then
> - warn "${path}/$PMX_ESP_DIR does not exist"
> - fi
> - versions_uefi=$(ls -1 ${mountpoint}/$PMX_ESP_DIR | awk '{printf (NR>1?", ":"") $0}')
> - result="uefi (versions: ${versions_uefi})"
> + result="uefi"
> fi
> if [ -d "${mountpoint}/grub" ]; then
> - versions_grub=$(ls -1 ${mountpoint}/vmlinuz-* | awk '{ gsub(/.*\/vmlinuz-/, ""); printf (NR>1?", ":"") $0 }')
> if [ -n "$result" ]; then
> - result="${result}, grub (versions: ${versions_grub})"
> + result="${result}, grub"
> else
> - result="grub (versions: ${versions_grub})"
> + result="grub"
this here
> fi
> fi
> + versions=$(find "${mountpoint}" -maxdepth 1 -name 'vmlinuz-*' | awk '{ gsub(/.*\/vmlinuz-/, ""); printf (NR>1?", ":"") $0 }')
> + result="${result} (versions: ${versions})"
> +
> echo "$curr_uuid is configured with: $result"
> umount "${mountpoint}" || \
> { warn "umount of ${path} failed - failure"; exit 0; }
> diff --git a/proxmox-boot/zz-proxmox-boot b/proxmox-boot/zz-proxmox-boot
> index 5fe16a6..244373d 100755
> --- a/proxmox-boot/zz-proxmox-boot
> +++ b/proxmox-boot/zz-proxmox-boot
> @@ -75,33 +75,33 @@ update_esp_func() {
> { warn "creation of mountpoint ${mountpoint} failed - skipping"; return; }
> mount "${path}" "${mountpoint}" || \
> { warn "mount of ${path} failed - skipping"; return; }
> - if [ -d /sys/firmware/efi ]; then
> - if [ ! -f "${mountpoint}/$PMX_LOADER_CONF" ]; then
> - warn "${path} contains no loader.conf - skipping"
> - return
> - fi
> - if [ ! -d "${mountpoint}/$PMX_ESP_DIR" ]; then
> - warn "${path}/$PMX_ESP_DIR does not exist- skipping"
> - return
> - fi
> - elif [ ! -d "${mountpoint}/grub" ]; then
> - warn "${path} contains no grub directory - skipping"
> + sd_boot=""
> + grub=""
> + if [ -f "${mountpoint}/$PMX_LOADER_CONF" ]; then
> + sd_boot=1
> + fi
> + if [ -d "${mountpoint}/grub" ]; then
> + grub=1
> + fi
and this here looks rather similar - maybe it makes sense to have
helpers for 'ESP contains grub' and 'ESP contains sd-boot' before we add
more copies? ;)
> + if [ -z "$sd_boot" ] && [ -z "$grub" ]; then
> + warn "${path} contains no bootloader config - skipping!"
> return
> fi
> warn "Copying and configuring kernels on ${path}"
> - copy_and_config_kernels "${mountpoint}"
> + copy_and_config_kernels "${mountpoint}" "${sd_boot}"
>
> pinned_kernel=$(get_first_line "${PINNED_KERNEL_CONF}")
>
> if [ -e "${NEXT_BOOT_PIN}" ]; then
> pinned_kernel=$(get_first_line "${NEXT_BOOT_PIN}")
> fi
> - if [ -d /sys/firmware/efi ]; then
> + if [ -n "$sd_boot" ]; then
> set_systemd_boot_default "${mountpoint}" "${pinned_kernel}"
> - remove_old_kernels_efi "${mountpoint}"
> - else
> + remove_old_kernels "${mountpoint}"
> + fi
> + if [ -n "$grub" ]; then
> set_grub_default "${pinned_kernel}"
> - remove_old_kernels_legacy "${mountpoint}"
> + remove_old_kernels "${mountpoint}"
> mount --bind "${mountpoint}" "/boot"
> update-grub
> umount /boot
> @@ -116,7 +116,7 @@ update_esp_func() {
>
> copy_and_config_kernels() {
> esp="$1"
> -
> + sd_boot="$2"
>
> for kver in ${BOOT_KVERS}; do
>
> @@ -132,52 +132,25 @@ copy_and_config_kernels() {
> continue
> fi
>
> - if [ -d /sys/firmware/efi ]; then
> -
> - warn " Copying kernel and creating boot-entry for ${kver}"
> - KERNEL_ESP_DIR="${PMX_ESP_DIR}/${kver}"
> - KERNEL_LIVE_DIR="${esp}/${KERNEL_ESP_DIR}"
> - mkdir -p "${KERNEL_LIVE_DIR}"
> - cp --preserve=timestamps "${linux_image}" "${KERNEL_LIVE_DIR}/"
> - cp --preserve=timestamps "${initrd}" "${KERNEL_LIVE_DIR}/"
> + warn " Copying kernel and creating boot-entry for ${kver}"
nit: technically only true for the uefi/sd_boot if below
> + cp --preserve=timestamps "${linux_image}" "${esp}/"
> + cp --preserve=timestamps "${initrd}" "${esp}/"
>
> - # create loader entry
> + if [ -n "$sd_boot" ]; then
> + # create loader entry
> cat > "${esp}/loader/entries/proxmox-${kver}.conf" <<- EOF
> title ${LOADER_TITLE}
> version ${kver}
> options ${CMDLINE}
> - linux /${KERNEL_ESP_DIR}/vmlinuz-${kver}
> - initrd /${KERNEL_ESP_DIR}/initrd.img-${kver}
> + linux /vmlinuz-${kver}
> + initrd /initrd.img-${kver}
> EOF
> - else
> - warn " Copying kernel ${kver}"
> - cp --preserve=timestamps "${linux_image}" "${esp}/"
> - cp --preserve=timestamps "${initrd}" "${esp}/"
> - fi
> - done
> -
> -}
> -
> -remove_old_kernels_efi() {
> - esp="$1"
> -
> - for kerneldir in "${esp}/${PMX_ESP_DIR}"/*; do
> - if [ ! -d "${kerneldir}" ]; then
> - warn " ${kerneldir} is not a directory - skipping"
> - continue
> fi
> -
> - kver="$(echo "${kerneldir}" | sed -r "s#^${esp}/${PMX_ESP_DIR}/(.+)\$#\\1#")"
> -
> - echo "${BOOT_KVERS}" | grep -q "${kver}" && continue;
> - warn " Removing old version ${kver}"
> - rm -rf "${kerneldir}"
> - rm -f "${esp}/loader/entries/proxmox-${kver}.conf"
> done
this still needs to be done at least once per ESP post-upgrade, else all
the (now unused) kernels+initrds in the old efi location are kept around
forever, taking up precious space on our small ESPs ;)
maybe replace it with a simple
if dir_exists; then rm -rf ...; fi
?
>
> }
>
> -remove_old_kernels_legacy() {
> +remove_old_kernels() {
> esp="$1"
>
> for kernel in "${esp}/"vmlinuz-*; do
> @@ -187,6 +160,7 @@ remove_old_kernels_legacy() {
> warn " Removing old version ${kver}"
> rm -rf "${esp}/vmlinuz-${kver}"
> rm -rf "${esp}/initrd.img-${kver}"
> + rm -rf "${esp}/loader/entries/proxmox-${kver}.conf"
> done
>
> }
> --
> 2.30.2
>
>
>
> _______________________________________________
> pve-devel mailing list
> pve-devel at lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>
>
>
More information about the pve-devel
mailing list