[pve-devel] [PATCH pve-kernel-meta v2 2/4] proxmox-boot: fix #3671 add pin/unpin for kernel-version
Stoiko Ivanov
s.ivanov at proxmox.com
Fri Feb 4 19:45:34 CET 2022
The 2 commands follow the mechanics of p-b-t kernel add/remove in
writing the desired abi-version to a config-file in /etc/kernel and
actually modifying the boot-loader configuration upon p-b-t refresh.
A dedicated new file is used instead of writing the version (with some
kind of annotation) to the manual kernel list to keep parsing the file
simple (and hopefully also cause fewer problems with manually edited
files)
For systemd-boot we write the entry into the loader.conf on the ESP(s)
instead of relying on the `bootctl set-default` mechanics (bootctl(1))
which write the entry in an EFI-var. This was preferred, because of a
few reports of unwriteable EFI-vars on some systems (e.g. DELL servers
have a setting preventing writing EFI-vars from the OS). The rationale
in `Why not simply rely on the EFI boot menu logic?` from [0] also
makes a few points in that direction.
For grub the following choices were made:
* write the pinned version (or actually the menu-path leading to it)
to a snippet in /etc/default/grub.d instead of editing the grub.cfg
files on the partition. Mostly to divert as little as possible from
the grub-workflow I assume people are used to.
* the 'root-device-id' part of the menu-entries is parsed from
/boot/grub/grug.cfg since it was stable (the same on all ESPs and in
/boot/grub), saves us from copying the part of "find device behind
/, mangle it if zfs/btrfs, call grub_probe a few times" part of
grub-mkconfig - and seems a bit more robust
Tested with a BIOS and an UEFI VM with / on ZFS.
[0] https://systemd.io/BOOT_LOADER_SPECIFICATION/
Signed-off-by: Stoiko Ivanov <s.ivanov at proxmox.com>
---
bin/proxmox-boot-tool | 46 ++++++++++++++++++++++++++++++++----
proxmox-boot/functions | 37 +++++++++++++++++++++++++++++
proxmox-boot/zz-proxmox-boot | 5 ++++
3 files changed, 83 insertions(+), 5 deletions(-)
diff --git a/bin/proxmox-boot-tool b/bin/proxmox-boot-tool
index 93760fb..31342a6 100755
--- a/bin/proxmox-boot-tool
+++ b/bin/proxmox-boot-tool
@@ -280,12 +280,16 @@ list_kernels() {
if [ -z "$manual_kernels" ]; then
manual_kernels="None."
fi
+ pinned_kernel="$(get_first_line "$PINNED_KERNEL_CONF")"
echo "Manually selected kernels:"
echo "$manual_kernels"
echo ""
echo "Automatically selected kernels:"
echo "$boot_kernels"
+ echo ""
+ echo "Pinned kernel:"
+ echo "${pinned_kernel:-None}"
}
usage() {
@@ -295,8 +299,8 @@ usage() {
warn " $0 init <partition>"
warn " $0 clean [--dry-run]"
warn " $0 refresh [--hook <name>]"
- warn " $0 kernel <add|remove> <kernel-version>"
- warn " $0 kernel list"
+ warn " $0 kernel <add|remove|pin> <kernel-version>"
+ warn " $0 kernel <list|unpin>"
warn " $0 status [--quiet]"
warn " $0 help"
}
@@ -318,14 +322,16 @@ help() {
echo ""
echo " refresh all configured EFI system partitions. Use --hook to only run the specified hook, omit to run all."
echo ""
- echo "USAGE: $0 kernel <add|remove> <kernel-version>"
+ echo "USAGE: $0 kernel <add|remove|pin> <kernel-version>"
echo ""
echo " add/remove pve-kernel with ABI <kernel-version> to list of synced kernels, in addition to automatically selected ones."
- echo " NOTE: you need to manually run 'refresh' once you're finished with adding/removing kernels from the list"
+ echo " pin pve-kernel with ABI <kernel-version> sets it as the default entry to be booted."
+ echo " NOTE: you need to manually run 'refresh' once you're finished with adding/removing/pinning kernels from the list"
echo ""
- echo "USAGE: $0 kernel list"
+ echo "USAGE: $0 kernel <list|unpin>"
echo ""
echo " list kernel versions currently selected for inclusion on ESPs."
+ echo " unpin sets the latest kernel as the default entry (undoes a previous pin)"
echo ""
echo "USAGE: $0 status [--quiet]"
echo ""
@@ -392,6 +398,28 @@ status() {
fi
}
+pin_kernel() {
+ ver="$1"
+
+ if [ -z "$ver" ]; then
+ warn "E: <kernel-version> is mandatory"
+ warn ""
+ exit 1
+ fi
+
+ if [ ! -e "/boot/vmlinuz-$ver" ]; then
+ warn "E: no kernel image found in /boot for '$ver', not setting default."
+ exit 1
+ fi
+ echo "$ver" > "$PINNED_KERNEL_CONF"
+ echo "Set kernel '$ver' $PINNED_KERNEL_CONF. Use the 'refresh' command to update the ESPs."
+}
+
+unpin_kernel() {
+ rm -f "$PINNED_KERNEL_CONF"
+ echo "Removed $PINNED_KERNEL_CONF. Use the 'refresh' command to update the ESPs."
+}
+
if [ -z "$1" ]; then
usage
exit 0
@@ -460,6 +488,14 @@ case "$1" in
list_kernels
exit 0
;;
+ 'pin')
+ pin_kernel "$2"
+ exit 0
+ ;;
+ 'unpin')
+ unpin_kernel "$2"
+ exit 0
+ ;;
*)
warn "E: invalid 'kernel' subcommand '$cmd'."
warn ""
diff --git a/proxmox-boot/functions b/proxmox-boot/functions
index 27da363..d97a7a1 100755
--- a/proxmox-boot/functions
+++ b/proxmox-boot/functions
@@ -5,11 +5,13 @@ ESP_LIST="/etc/kernel/proxmox-boot-uuids"
ESPTYPE='c12a7328-f81f-11d2-ba4b-00a0c93ec93b'
MANUAL_KERNEL_LIST="/etc/kernel/pve-efiboot-manual-kernels"
+PINNED_KERNEL_CONF="/etc/kernel/proxmox-boot-pin"
MOUNTROOT="${TMPDIR:-/var/tmp}/espmounts"
# relative to the ESP mountpoint
PMX_ESP_DIR="EFI/proxmox"
PMX_LOADER_CONF="loader/loader.conf"
+GRUB_PIN_SNIPPET="/etc/default/grub.d/proxmox-kernel-pin.cfg"
# adapted from /etc/kernel/postinst.d/apt-auto-removal as present in
# debian's apt package:
@@ -21,6 +23,7 @@ PMX_LOADER_CONF="loader/loader.conf"
# - the second-latest kernel version
# - the latest kernel version of each series (e.g. 4.13, 4.15, 5.0) by
# marking the meta-packages
+# - the currently pinned kernel if any
kernel_keep_versions() {
eval "$(apt-config shell DPKG Dir::bin::dpkg/f)"
@@ -56,6 +59,8 @@ kernel_keep_versions() {
manual_kernels="$(cat "$MANUAL_KERNEL_LIST")"
fi
+ pinned_kernel="$(get_first_line "$PINNED_KERNEL_CONF")"
+
kernels="$(cat <<-EOF
$running_version
$install_version
@@ -63,6 +68,7 @@ kernel_keep_versions() {
$latest_2_versions
$series_metapackages
$oldseries_latest_kernel
+ $pinned_kernel
EOF
)"
@@ -114,3 +120,34 @@ get_first_line() {
done < "${file}"
echo "$line"
}
+
+set_grub_default() {
+ kver="$1"
+
+ if [ -z "${kver}" ]; then
+ rm -f "${GRUB_PIN_SNIPPET}"
+ else
+ # grub menu entry ids contain the internal root-device id
+ # (e.g. for zfs the GUID of the pool printed in hex) as this
+ # as this is independent of the ESP (or grub location) take
+ # it from /boot/grub/grub.cfg
+ root_devid=$(sed -rn "s/.*gnulinux-advanced-(.+)['] \{$/\1/p" \
+ /boot/grub/grub.cfg)
+ entry="gnulinux-advanced-${root_devid}>gnulinux-${kver}-advanced-${root_devid}"
+ echo "GRUB_DEFAULT=\"${entry}\"" > "${GRUB_PIN_SNIPPET}"
+ fi
+}
+
+set_systemd_boot_default() {
+ mountpoint="$1"
+ kver="$2"
+ if [ -z "${kver}" ]; then
+ entry="proxmox-*"
+ else
+ entry="proxmox-${kver}.conf"
+ fi
+
+ sed -ri "/^default /{h;s/ .*\$/ ${entry}/};\${x;/^$/{s//default ${entry}/;H};x}" \
+ "${mountpoint}/$PMX_LOADER_CONF"
+
+}
diff --git a/proxmox-boot/zz-proxmox-boot b/proxmox-boot/zz-proxmox-boot
index db73166..7958a5d 100755
--- a/proxmox-boot/zz-proxmox-boot
+++ b/proxmox-boot/zz-proxmox-boot
@@ -90,9 +90,14 @@ update_esp_func() {
fi
warn "Copying and configuring kernels on ${path}"
copy_and_config_kernels "${mountpoint}"
+
+ pinned_kernel=$(get_first_line "${PINNED_KERNEL_CONF}")
+
if [ -d /sys/firmware/efi ]; then
+ set_systemd_boot_default "${mountpoint}" "${pinned_kernel}"
remove_old_kernels_efi "${mountpoint}"
else
+ set_grub_default "${pinned_kernel}"
remove_old_kernels_legacy "${mountpoint}"
mount --bind "${mountpoint}" "/boot"
update-grub
--
2.30.2
More information about the pve-devel
mailing list