[pve-devel] [PATCH v3 qemu-server 1/4] disk reassign: add API endpoint
Aaron Lauterer
a.lauterer at proxmox.com
Thu Sep 10 16:32:39 CEST 2020
The goal of this new API endpoint is to provide an easy way to move a
disk between VMs as this was only possible with manual intervention
until now. Either by renaming the VM disk or by manually adding the
disks volid to the config of the other VM.
The latter can easily cause unexpected behavior such as disks attached
to VM B would be deleted if it used to be a disk of VM A. This happens
because PVE assumes that the VMID in the volname always matches the VM
the disk is attached to and thus, would remove any disk with VMID A
when VM A was deleted.
The term `reassign` was chosen as it is not yet used
for disk VMs.
Signed-off-by: Aaron Lauterer <a.lauterer at proxmox.com>
---
v2 -> v3:
* reordered the locking as discussed with fabian [0] to
run checks
fork worker
lock source config
lock target config
run checks
...
* added more checks
* will not reassign to or from templates
* will not reassign if VM has snapshots present
* cleanup if disk used to be replicated
* made task log slightly more verbose
* integrated general recommendations regarding code
* renamed `disk` to `drive_key`
* prepended some vars with `source_` for easier distinction
v1 -> v2: print config key and volid info at the end of the job so it
shows up on the CLI and task log
rfc -> v1:
* add support to reassign unused disks
* add support to provide a config digest for the target vm
* add additional check if disk key is present in config
* reorder checks a bit
In order to support unused disk I had to extend
PVE::QemuServer::Drive::valid_drive_names for the API parameter
validation.
Checks are ordered so that cheap tests are run at the first chance to
fail early.
The check if both VMs are present on the node is a bit redundant because
locking the config files will fail if the VM is not present. But with
the additional check we can provide a useful error message to the user
instead of a "Configuration file xyz does not exist" error.
[0] https://lists.proxmox.com/pipermail/pve-devel/2020-September/044930.html
diff --git a/PVE/API2/Qemu.pm b/PVE/API2/Qemu.pm
index 8da616a..613b257 100644
--- a/PVE/API2/Qemu.pm
+++ b/PVE/API2/Qemu.pm
@@ -4265,4 +4265,160 @@ __PACKAGE__->register_method({
return PVE::QemuServer::Cloudinit::dump_cloudinit_config($conf, $param->{vmid}, $param->{type});
}});
+__PACKAGE__->register_method({
+ name => 'reassign_vm_disk',
+ path => '{vmid}/reassign_disk',
+ method => 'POST',
+ protected => 1,
+ proxyto => 'node',
+ description => "Reassign a disk to another VM",
+ permissions => {
+ description => "You need 'VM.Config.Disk' permissions on /vms/{vmid}, and 'Datastore.Allocate' permissions on the storage.",
+ check => [ 'and',
+ ['perm', '/vms/{vmid}', [ 'VM.Config.Disk' ]],
+ ['perm', '/storage/{storage}', [ 'Datastore.Allocate' ]],
+ ],
+ },
+ parameters => {
+ additionalProperties => 0,
+ properties => {
+ node => get_standard_option('pve-node'),
+ vmid => get_standard_option('pve-vmid', { completion => \&PVE::QemuServer::complete_vmid }),
+ target_vmid => get_standard_option('pve-vmid', { completion => \&PVE::QemuServer::complete_vmid }),
+ drive_key => {
+ type => 'string',
+ description => "The config key of the disk to reassign (for example, ide0 or scsi1).",
+ enum => [PVE::QemuServer::Drive::valid_drive_names_with_unused()],
+ },
+ digest => {
+ type => 'string',
+ description => 'Prevent changes if current the configuration file of the source VM has a different SHA1 digest. This can be used to prevent concurrent modifications.',
+ maxLength => 40,
+ optional => 1,
+ },
+ target_digest => {
+ type => 'string',
+ description => 'Prevent changes if current the configuration file of the target VM has a different SHA1 digest. This can be used to prevent concurrent modifications.',
+ maxLength => 40,
+ optional => 1,
+ },
+ },
+ },
+ returns => {
+ type => 'string',
+ description => "the task ID.",
+ },
+ code => sub {
+ my ($param) = @_;
+
+ my $rpcenv = PVE::RPCEnvironment::get();
+ my $authuser = $rpcenv->get_user();
+
+ my $node = extract_param($param, 'node');
+ my $source_vmid = extract_param($param, 'vmid');
+ my $target_vmid = extract_param($param, 'target_vmid');
+ my $source_digest = extract_param($param, 'digest');
+ my $target_digest = extract_param($param, 'target_digest');
+ my $drive_key = extract_param($param, 'drive_key');
+
+ my $storecfg = PVE::Storage::config();
+ my $vmlist;
+ my $drive;
+ my $source_volid;
+
+ die "You cannot reassign a disk to the same VM\n"
+ if $source_vmid eq $target_vmid;
+
+ my $load_and_check_configs = sub {
+ $vmlist = PVE::QemuServer::vzlist();
+ die "Both VMs need to be on the same node\n"
+ if !$vmlist->{$source_vmid}->{exists} || !$vmlist->{$target_vmid}->{exists};
+
+ my $source_conf = PVE::QemuConfig->load_config($source_vmid);
+ PVE::QemuConfig->check_lock($source_conf);
+ my $target_conf = PVE::QemuConfig->load_config($target_vmid);
+ PVE::QemuConfig->check_lock($target_conf);
+
+ die "Can't reassign disks with templates\n"
+ if ($source_conf->{template} || $target_conf->{template});
+
+ if ($source_digest) {
+ eval { PVE::Tools::assert_if_modified($source_digest, $source_conf->{digest}) };
+ if (my $err = $@) {
+ die "Verification of source VM digest failed: ${err}";
+ }
+ }
+
+ if ($target_digest) {
+ eval { PVE::Tools::assert_if_modified($target_digest, $target_conf->{digest}) };
+ if (my $err = $@) {
+ die "Verification of target VM digest failed: ${err}";
+ }
+ }
+
+ die "Disk '${drive_key}' does not exist\n"
+ if !defined($source_conf->{$drive_key});
+
+ $drive = PVE::QemuServer::parse_drive($drive_key, $source_conf->{$drive_key});
+ $source_volid = $drive->{file};
+ die "disk '${drive_key}' has no associated volume\n" if !$source_volid;
+ die "CD drive contents can't be reassigned\n" if PVE::QemuServer::drive_is_cdrom($drive, 1);
+
+ die "Can't reassign disk used by a snapshot\n"
+ if PVE::QemuServer::Drive::is_volume_in_use($storecfg, $source_conf, $drive_key, $source_volid);
+
+ my $hasfeature = PVE::Storage::volume_has_feature($storecfg, 'reassign', $source_volid);
+ die "Storage does not support the reassignment of this disk\n" if !$hasfeature;
+
+ die "Cannot reassign disk while the source VM is running\n"
+ if PVE::QemuServer::check_running($source_vmid) && $drive_key !~ m/unused[0-9]/;
+
+ return ($source_conf, $target_conf);
+ };
+
+ my $reassign_func = sub {
+ return PVE::QemuConfig->lock_config($source_vmid, sub {
+ return PVE::QemuConfig->lock_config($target_vmid, sub {
+ my ($source_conf, $target_conf) = &$load_and_check_configs();
+
+ PVE::Cluster::log_msg('info', $authuser, "reassign disk VM $source_vmid: reassign --disk ${drive_key} --target_vmid $target_vmid");
+
+ my $new_volid = PVE::Storage::reassign_volume($storecfg, $source_volid, $target_vmid);
+
+ delete $source_conf->{$drive_key};
+ PVE::QemuConfig->write_config($source_vmid, $source_conf);
+ print "removing disk '${drive_key}' from VM '${source_vmid}'\n";
+
+ # remove possible replication snapshots
+ my $had_snapshots = 0;
+ if (PVE::Storage::volume_has_feature($storecfg, 'replicate', $new_volid)) {
+ my $snapshots = PVE::Storage::volume_snapshot_list($storecfg, $new_volid);
+ for my $snap (@$snapshots) {
+ next if (substr($snap, 0, 12) ne '__replicate_');
+
+ $had_snapshots = 1;
+ PVE::Storage::volume_snapshot_delete($storecfg, $new_volid, $snap);
+ }
+ print "Disk '${drive_key}:${source_volid}' was replicated. On the next replication run it will be cleaned up on the replication target.\n"
+ if $had_snapshots;;
+ }
+
+ my $key;
+ eval { $key = PVE::QemuConfig->add_unused_volume($target_conf, $new_volid) };
+ if (my $err = $@) {
+ print "adding moved disk '${new_volid}' to VM '${target_vmid}' config failed.\n";
+ return 0;
+ }
+
+ PVE::QemuConfig->write_config($target_vmid, $target_conf);
+ print "adding disk to VM '${target_vmid}' as '${key}: ${new_volid}'\n";
+ });
+ });
+ };
+
+ &$load_and_check_configs();
+
+ return $rpcenv->fork_worker('qmreassign', $source_vmid, $authuser, $reassign_func);
+ }});
+
1;
diff --git a/PVE/QemuServer/Drive.pm b/PVE/QemuServer/Drive.pm
index 91c33f8..d2f59cd 100644
--- a/PVE/QemuServer/Drive.pm
+++ b/PVE/QemuServer/Drive.pm
@@ -383,6 +383,10 @@ sub valid_drive_names {
'efidisk0');
}
+sub valid_drive_names_with_unused {
+ return (valid_drive_names(), map {"unused$_"} (0 .. ($MAX_UNUSED_DISKS -1)));
+}
+
sub is_valid_drivename {
my $dev = shift;
--
2.20.1
More information about the pve-devel
mailing list