[pve-devel] [PATCH v2 03/11] read_etc_network_interfaces: improved parsing
Wolfgang Bumiller
w.bumiller at proxmox.com
Thu Jun 25 11:54:26 CEST 2015
* parsing ipv6 blocks
* parsing extra lines like source/source-directory/...
* merge multiple bridge_port lines into one
* write options only once
The returned config hash is not just the interface hash
anymore. Interfaces are now in its 'ifaces' member hash. All
unknown options (including mappings) end up in its 'options'
hash.
Added a comment describing the config hash's layout in
detail.
An interface can now have an ipv4 and an ipv6 entry, they
will be returned as a single interface with
address/netmask/gateway and address6/netmask6/gateway6
elements. Additionally a 'families' array is available
listing which families are available. Ideally we'll at some
point allow unhandled families to be kept too, however, now
that extra lines like 'source' and 'source-directory' are
preserved, it is recommended to move all custom
configuration into separate files to not interfere with our
interface parsing.
Options such as bridge ports or ovs_* will now be written
out only for the first interface. If multiple protocol
families of a bridge contain bridge_ports lines they will be
merged into the first interface.
---
src/PVE/INotify.pm | 144 ++++++++++++++++++++++++++++++++++++++---------------
1 file changed, 104 insertions(+), 40 deletions(-)
diff --git a/src/PVE/INotify.pm b/src/PVE/INotify.pm
index 134305f..e773cf4 100644
--- a/src/PVE/INotify.pm
+++ b/src/PVE/INotify.pm
@@ -745,10 +745,49 @@ my $extract_ovs_option = sub {
return $v;
};
+# config => {
+# ifaces => {
+# $ifname => {
+# <optional> exists => BOOL,
+# <optional> active => BOOL,
+# <optional> autostart => BOOL,
+# <auto> priority => INT,
+#
+# type => "eth" | "bridge" | "bond" | "loopback" | "OVS*" | ... ,
+#
+# families => ["inet", "inet6", ...],
+#
+# method => "manual" | "static" | "dhcp" | ... ,
+# address => IP,
+# netmask => SUBNET,
+# broadcast => IP,
+# gateway => IP,
+# comments => [ "..." ],
+#
+# method6 => "manual" | "static" | "dhcp" | ... ,
+# address6 => IP,
+# netmask6 => SUBNET,
+# gateway6 => IP,
+# comments6 => [ "..." ],
+#
+# <known options>, # like bridge_ports, ovs_*
+#
+# # extra/unknown options stored by-family:
+# options => { <inet options>... }
+# options6 => { <inet6 options>... }
+# }
+# },
+# options => [
+# # mappings end up here as well, as we don't need to understand them
+# [priority,line]
+# ]
+# }
sub read_etc_network_interfaces {
my ($filename, $fh) = @_;
- my $ifaces = {};
+ my $config = {};
+ my $ifaces = $config->{ifaces} = {};
+ my $options = $config->{options} = [];
my $line;
@@ -775,19 +814,23 @@ sub read_etc_network_interfaces {
$ifaces->{$a}->{autostart} = 1;
}
- } elsif ($line =~ m/^\s*iface\s+(\S+)\s+inet\s+(\S+)\s*$/) {
+ } elsif ($line =~ m/^\s*iface\s+(\S+)\s+(inet6?)\s+(\S+)\s*$/) {
my $i = $1;
- $ifaces->{$i}->{method} = $2;
- $ifaces->{$i}->{priority} = $priority++;
+ my $family = $2;
+ my $f = { method => $3 }; # by family, merged to $d with a $suffix
+ (my $suffix = $family) =~ s/^inet//;
my $d = $ifaces->{$i};
+ $d->{priority} = $priority++ if !$d->{priority};
+ push @{$d->{families}}, $family;
+
while (defined ($line = <$fh>)) {
chomp $line;
if ($line =~ m/^\s*#(.*?)\s*$/) {
# NOTE: we use 'comments' instead of 'comment' to
# avoid automatic utf8 conversion
- $d->{comments} = '' if !$d->{comments};
- $d->{comments} .= "$1\n";
+ $f->{comments} = '' if !$f->{comments};
+ $f->{comments} .= "$1\n";
} elsif ($line =~ m/^\s*(?:iface\s
|mapping\s
|auto\s
@@ -800,7 +843,7 @@ sub read_etc_network_interfaces {
my $option = $1;
my ($id, $value) = ($2, $3);
if (($id eq 'address') || ($id eq 'netmask') || ($id eq 'broadcast') || ($id eq 'gateway')) {
- $d->{$id} = $value;
+ $f->{$id} = $value;
} elsif ($id eq 'ovs_type' || $id eq 'ovs_options'|| $id eq 'ovs_bridge' ||
$id eq 'ovs_bonds' || $id eq 'ovs_ports') {
$d->{$id} = $value;
@@ -811,7 +854,11 @@ sub read_etc_network_interfaces {
$devs->{$p} = 1;
}
my $str = join (' ', sort keys %{$devs});
- $d->{$id} = $str || '';
+ if ($d->{$id}) {
+ $d->{$id} .= ' ' . $str if $str;
+ } else {
+ $d->{$id} = $str || '';
+ }
} elsif ($id eq 'bridge_stp') {
if ($value =~ m/^\s*(on|yes)\s*$/i) {
$d->{$id} = 'on';
@@ -835,14 +882,17 @@ sub read_etc_network_interfaces {
}
$d->{$id} = $value;
} else {
- push @{$d->{options}}, $option;
+ push @{$f->{options}}, $option;
}
} else {
last;
}
}
+ $d->{"$_$suffix"} = $f->{$_} foreach (keys %$f);
last SECTION if !defined($line);
redo SECTION;
+ } elsif ($line =~ /\w/) {
+ push @$options, [$priority++, $line];
}
}
@@ -925,6 +975,7 @@ sub read_etc_network_interfaces {
}
$d->{method} = 'manual' if !$d->{method};
+ $d->{method6} = 'manual' if !$d->{method6};
}
if (my $fd2 = IO::File->new("/proc/net/if_inet6", "r")) {
@@ -936,27 +987,33 @@ sub read_etc_network_interfaces {
close ($fd2);
}
- return $ifaces;
+ return $config;
}
sub __interface_to_string {
- my ($iface, $d) = @_;
+ my ($iface, $d, $family, $first_block) = @_;
+
+ (my $suffix = $family) =~ s/^inet//;
- return '' if !($d && $d->{method});
+ return '' if !($d && $d->{"method$suffix"});
my $raw = '';
- $raw .= "iface $iface inet $d->{method}\n";
- $raw .= "\taddress $d->{address}\n" if $d->{address};
- $raw .= "\tnetmask $d->{netmask}\n" if $d->{netmask};
- $raw .= "\tgateway $d->{gateway}\n" if $d->{gateway};
- $raw .= "\tbroadcast $d->{broadcast}\n" if $d->{broadcast};
+ $raw .= "iface $iface $family " . $d->{"method$suffix"} . "\n";
+ $raw .= "\taddress " . $d->{"address$suffix"} . "\n" if $d->{"address$suffix"};
+ $raw .= "\tnetmask " . $d->{"netmask$suffix"} . "\n" if $d->{"netmask$suffix"};
+ $raw .= "\tgateway " . $d->{"gateway$suffix"} . "\n" if $d->{"gateway$suffix"};
+ $raw .= "\tbroadcast " . $d->{"broadcast$suffix"} . "\n" if $d->{"broadcast$suffix"};
my $done = { type => 1, priority => 1, method => 1, active => 1, exists => 1,
comments => 1, autostart => 1, options => 1,
- address => 1, netmask => 1, gateway => 1, broadcast => 1 };
-
- if ($d->{type} eq 'bridge') {
+ address => 1, netmask => 1, gateway => 1, broadcast => 1,
+ method6 => 1, families => 1, options6 => 1,
+ address6 => 1, netmask6 => 1, gateway6 => 1, broadcast6 => 1 };
+
+ if (!$first_block) {
+ # not printing out options
+ } elsif ($d->{type} eq 'bridge') {
my $ports = $d->{bridge_ports} || 'none';
$raw .= "\tbridge_ports $ports\n";
@@ -997,7 +1054,6 @@ sub __interface_to_string {
$raw .= "\tovs_ports $d->{ovs_ports}\n" if $d->{ovs_ports};
$done->{ovs_ports} = 1;
-
} elsif ($d->{type} eq 'OVSPort' || $d->{type} eq 'OVSIntPort' ||
$d->{type} eq 'OVSBond') {
@@ -1031,48 +1087,45 @@ sub __interface_to_string {
$done->{ovs_bonds} = 1;
}
- if ($d->{ovs_bridge}) {
- $raw = "allow-$d->{ovs_bridge} $iface\n$raw";
- }
-
$raw .= "\tovs_type $d->{type}\n";
$done->{ovs_type} = 1;
if ($d->{ovs_bridge}) {
+ $raw = "allow-$d->{ovs_bridge} $iface\n$raw";
$raw .= "\tovs_bridge $d->{ovs_bridge}\n";
$done->{ovs_bridge} = 1;
}
- # fixme: use Data::Dumper; print Dumper($d);
}
- # print other settings
- foreach my $k (keys %$d) {
- next if $done->{$k};
- next if !$d->{$k};
- $raw .= "\t$k $d->{$k}\n";
+ if ($first_block) {
+ # print other settings
+ foreach my $k (keys %$d) {
+ next if $done->{$k};
+ next if !$d->{$k};
+ $raw .= "\t$k $d->{$k}\n";
+ }
}
- foreach my $option (@{$d->{options}}) {
+ foreach my $option (@{$d->{"options$suffix"}}) {
$raw .= "\t$option\n";
}
# add comments
- my $comments = $d->{comments} || '';
+ my $comments = $d->{"comments$suffix"} || '';
foreach my $cl (split(/\n/, $comments)) {
$raw .= "#$cl\n";
}
- if ($d->{autostart}) {
- $raw = "auto $iface\n$raw";
- }
-
$raw .= "\n";
return $raw;
}
sub write_etc_network_interfaces {
- my ($filename, $fh, $ifaces) = @_;
+ my ($filename, $fh, $config) = @_;
+
+ my $ifaces = $config->{ifaces};
+ my @options = @{$config->{options}};
my $used_ports = {};
@@ -1199,10 +1252,21 @@ sub write_etc_network_interfaces {
next if $printed->{$iface};
+ if (@options && $options[0]->[0] < $d->{priority}) {
+ do {
+ $raw .= (shift @options)->[1] . "\n";
+ } while (@options && $options[0]->[0] < $d->{priority});
+ $raw .= "\n";
+ }
+
$printed->{$iface} = 1;
- $raw .= __interface_to_string($iface, $d);
+ $raw .= "auto $iface\n" if $d->{autostart};
+ my $i = 0; # some options should be printed only once
+ $raw .= __interface_to_string($iface, $d, $_, !$i++) foreach @{$d->{families}};
}
-
+
+ $raw .= $_->[1] . "\n" foreach @options;
+
PVE::Tools::safe_print($filename, $fh, $raw);
}
--
2.1.4
More information about the pve-devel
mailing list