[pve-devel] qemu 1.0 : scsi boot not working anymore
aderumier at odiso.com
Thu Dec 8 13:20:07 CET 2011
ok, I can get it working
we need to take 8xx_64.rom from lsi and put it in /usr/share/kvm/
then start the kvm with -option-rom 8xx_64.rom.
also, network devices pxe boot conflict, so I must use "romfile=" on network device.
And it's booting fine.
I don't know which license 8xx_64.rom is ? Can we integrated it in proxmox ?
----- Mail original -----
De: "Alexandre DERUMIER" <aderumier at odiso.com>
À: pve-devel at pve.proxmox.com
Envoyé: Jeudi 8 Décembre 2011 12:00:47
Objet: [pve-devel] qemu 1.0 : scsi boot not working anymore
I'm doing some test on qemu 1.0 ,
scsi disks does not seem to boot anymore.
scsi disk are working good. (i can mount them if i boot from ide or virtio).
Must be related to seabios
Not sure it's related but I found this message:
Re: [RFC][PATCH] qemu-kvm: Remove extboot support
On Thu, Sep 29, 2011 at 01:29:05PM +0200, Jan Kiszka wrote:
> Except for booting from SCSI via the LSI controller, SeaBIOS has native
> support for mass storage interfaces now. And SCSI can be worked around
> via  - or someone finally adds the necessary bits to SeaBIOS if there
> is a real need.
>  http://thread.gmane.org/gmane.comp.emulators.qemu/78467
> Signed-off-by: Jan Kiszka <jan.kiszka at xxxxxxxxxxx>
If I understand we need to pass lsi rom.
-> unzip -> boot with "-option-rom 8xx_64.rom"
I'll do more test today
pve-devel mailing list
pve-devel at pve.proxmox.com
e-mail : aderumier at odiso.com
Tél : +33 (0)3 20 68 88 90
Fax : +33 (0)3 20 68 90 81
45 Bvd du Général Leclerc
59100 ROUBAIX - FRANCE
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 183 bytes
Desc: not available
More information about the pve-devel