[PVE-User] Locking HA during UPS shutdown

[admins at telehouse.solutions]

I don’t remember, search into pvecm and pve[tab][tab] related commands man pages 

> On Mar 10, 2022, at 2:19 PM, Stefan Radman <stefan.radman at me.com> wrote:
> 
> Hi Sto
> 
> Thanks for the suggestions.
> 
> The second option is what I was looking for.
> 
> How do I initiate “pve node maintenance mode”?
> 
> The “Node Maintenance” paragraph in the HA documentation is quite brief and does not refer to any command or GUI component.
> 
> Thank you
> 
> Stefan
> 
> 
>> On Mar 10, 2022, at 14:50, admins at telehouse.solutions <mailto:admins at telehouse.solutions> wrote:
>> 
>> Hi, 
>> 
>> here are two ideas: shutdown sequence -and- command sequence
>> 1: shutdown sequence you may achieve when you set NUT’s on each node to only monitor the UPS power, then configure each node to shutdown itself on a different ups power levels, ex: node1 on 15% battery, node2 on 10% battery and so on
>> 2: you can set a cmd sequence to firstly execute  pve node maintenance mode , and then execute shutdown -> this way HA will not try to migrate vm to node in maintenance, and the chance all nodes to goes into maintenance in exactly same second seems to be not a risk at all.
>> 
>> hope thats helpful.
>> 
>> Regards,
>> Sto.
>> 
>>> On Mar 10, 2022, at 1:10 PM, Stefan Radman via pve-user <pve-user at lists.proxmox.com <mailto:pve-user at lists.proxmox.com>> wrote:
>>> 
>>> 
>>> From: Stefan Radman <stefan.radman at me.com <mailto:stefan.radman at me.com>>
>>> Subject: Locking HA during UPS shutdown
>>> Date: March 10, 2022 at 1:10:09 PM GMT+2
>>> To: PVE User List <pve-user at pve.proxmox.com <mailto:pve-user at pve.proxmox.com>>
>>> 
>>> 
>>> Hi 
>>> 
>>> I am configuring a 3 node PVE cluster with integrated Ceph storage.
>>> 
>>> It is powered by 2 UPS that are monitored by NUT (Network UPS Tools).
>>> 
>>> HA is configured with 3 groups:
>>> group pve1 nodes pve1:1,pve2,pve3
>>> group pve2 nodes pve1,pve2:1,pve3
>>> group pve3 nodes pve1,pve2,pve3:1
>>> 
>>> That will normally place the VMs in each group on the corresponding node, unless that node fails.
>>> 
>>> The cluster is configured to migrate VMs away from a node before shutting it down (Cluster=>Options=>HA Settings: shutdown_policy=migrate).
>>> 
>>> NUT is configured to shut down the serves once the last of the two UPS is running low on battery.
>>> 
>>> My problem:
>>> When NUT starts shutting down the 3 nodes, HA will first try to live-migrate them to another node.
>>> That live migration process gets stuck because all the nodes are shutting down simultaneously.
>>> It seems that the whole process runs into a timeout, finally “powers off” all the VMs and shuts down the nodes.
>>> 
>>> My question:
>>> Is there a way to “lock” or temporarily de-activate HA before shutting down a node to avoid that deadlock?
>>> 
>>> Thank you
>>> 
>>> Stefan
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> pve-user mailing list
>>> pve-user at lists.proxmox.com <mailto:pve-user at lists.proxmox.com>
>>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user <https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user>
>> 
>> 
>> Best Regards,
>> 
>> Stoyan Stoyanov Sto | Solutions Manager
>> | Telehouse.Solutions | ICT Department
>> | phone/viber:  +359 894774934 <tel:+359 894774934>
>> | telegram:  @prostoSto <https://mysignature.io/redirect/skype:prosto.sto?chat>
>> | skype:  prosto.sto <https://mysignature.io/redirect/skype:prosto.sto?chat>
>> | email:  sto at telehouse.solutions <mailto:sto at telehouse.solutions>
>> | website: www.telehouse.solutions <https://mysig.io/MTRmMTg>
>> | address: Telepoint #2, Sofia, Bulgaria
>>  <https://mysignature.io/editor/?utm_source=freepixel><356841.png>
>> 
>>  <https://mysig.io/ZDNkNWY>
>> Save paper. Don’t print
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> Best Regards,
>> 
>> Stoyan Stoyanov Sto | Solutions Manager
>> | Telehouse.Solutions | ICT Department
>> | phone/viber:  +359 894774934 <tel:+359 894774934>
>> | telegram:  @prostoSto <https://mysignature.io/redirect/skype:prosto.sto?chat>
>> | skype:  prosto.sto <https://mysignature.io/redirect/skype:prosto.sto?chat>
>> | email:  sto at telehouse.solutions <mailto:sto at telehouse.solutions>
>> | website: www.telehouse.solutions <https://mysig.io/MTRmMTg>
>> | address: Telepoint #2, Sofia, Bulgaria
>>  <https://mysignature.io/editor/?utm_source=freepixel><356841.png>
>> 
>>  <https://mysig.io/ZDNkNWY>
>> Save paper. Don’t print
> 


Best Regards,

Stoyan Stoyanov Sto | Solutions Manager
| Telehouse.Solutions | ICT Department
| phone/viber:  +359 894774934 <tel:+359 894774934>
| telegram:  @prostoSto <https://mysignature.io/redirect/skype:prosto.sto?chat>
| skype:  prosto.sto <https://mysignature.io/redirect/skype:prosto.sto?chat>
| email:  sto at telehouse.solutions <mailto:sto at telehouse.solutions>
| website: www.telehouse.solutions <https://mysig.io/MTRmMTg>
| address: Telepoint #2, Sofia, Bulgaria
 <https://mysignature.io/editor/?utm_source=freepixel>

 <https://mysig.io/ZDNkNWY>
Save paper. Don’t print