[PVE-User] How to configure which network is used for migration

[DERUMIER, Alexandre]

Hi,

datacenter->options->migration settings->network


Le jeudi 15 décembre 2022 à 08:23 +0100, Uwe Sauter a écrit :
> Good morning,
> 
> I'm currently replacing one PVE cluster with another. The new
> hardware has a bunch of different
> network interfaces that I want to use to separate VM traffic from
> Corosync/Ceph/migration traffic.
> 
> Is there a way to configure the interface/network that is used for
> migration or does this depend on
> the combination of hostname resolution and which hostname was used to
> create the cluster?
> (I have various hostnames configured per host, for each configured
> network one, so that I can
> explicitly choose which interface I use to connect to a host.)
> 
> Regards,
> 
>         Uwe
> 
> 
> Interface configuration:
> 
> eno1np0 --+-- untagged VLAN X -- Corosync ring 1/management network
> (192.168.1.0/24)
> 
> eno2np1 N/C
> 
> enp3s0  --+
>           +-- bond0 --+-- bond0.100 -- vmbr100 \
> enp4s0  --+           +-- bond0.101 -- vmbr101 +-- VM traffic
>                       +-- bond0.102 -- vmbr102 /
> 
> enp5s0  --+
>           +-- bond1 --+-- untagged VLAN Y -- Corosync ring 0/Ceph
> (172.16.1.0/24)
> enp6s0  --+
> 
> _______________________________________________
> pve-user mailing list
> pve-user at lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>