[PVE-User] Adding an Internet NIC to existing Proxmox

[Stefan M. Radman]

Hi Steve

You seem to have plenty of server and switch ports available.

In your case I would suggest to use a separate cable for every VLAN defined on your switch.

Stefan

On Mar 20, 2021, at 02:23, Steve Frazier <sfrazier1111 at yahoo.com<mailto:sfrazier1111 at yahoo.com>> wrote:

Hi Stefan,

I had some hardware issues with my server and had to reinstall.  I saved the interfaces from what you had sent me last and I have a few more questions if you don't mind.

Below is the last configuration that you sent me.

What I would like to do is run a patch cord from my 192.168.20.0/23 & 192.168.30.0/24 to my switch that will do VLANs if this is the best we of doing it.

I want to be able to send to my VOIP Phones (192.168.30.0) VLAN30 and Computer Network (192.168.20.0/23) so that I can run a single cable to my VOIP phones and then from the VOIP Phone be able to use VLAN30 for VOIP and then use VLAN20 for the computer beside the VOIP Phone.

Would running a single cable from Computer Network NIC and a single cable from my VOIP NIC (which is my Proxmox) the best way of doing this or what would you suggest.

Thanks very much, I really appreciate your help.

auto lo
iface lo inet loopback

iface enp9s0f1 inet manual
# Uplink for vmbr0

iface enp11s0f0 inet manual
# Uplink for vmbr1

iface enp11s0f1 inet manual
# Uplink for vmbr2

iface enp9s0f0 inet manual

iface enp3s0 inet manual

iface enp2s0 inet manual

auto vmbr0
iface vmbr0 inet static
        address 192.168.20.2/23
        gateway 192.168.20.1
        bridge-ports enp9s0f1
        bridge-stp off
        bridge-fd 0
# Host Management

auto vmbr1
iface vmbr1 inet manual
        bridge-ports enp9s0f0
        bridge-stp off
        bridge-fd 0
# Bridge Internet

auto vmbr2
iface vmbr2 inet manual
        bridge-ports enp11s0f1
        bridge-stp off
        bridge-fd 0
# Bridge 192.168.30.0/24


<proxmox-network.PNG>



CONFIDENTIALITY NOTICE: This communication may contain privileged and confidential information, or may otherwise be protected from disclosure, and is intended solely for use of the intended recipient(s). If you are not the intended recipient of this communication, please notify the sender that you have received this communication in error and delete and destroy all copies in your possession.