[PVE-User] After update Ceph monitor shows wrong version in UI and is down and out of quorum

Frank Thommen f.thommen at dkfz-heidelberg.de
Tue Jan 5 20:44:36 CET 2021



On 05.01.21 20:29, Uwe Sauter wrote:
> Frank,
> 
> Am 05.01.21 um 20:24 schrieb Frank Thommen:
>> Hi Uwe,
>>
>>> did you look into the log of MON and OSD?
>>
>> I can't see any specific MON and OSD logs. However the log available 
>> in the UI (Ceph -> Log) has lots of messages regarding scrubbing but 
>> no messages regarding issues with starting the monitor
>>
> 
> On each host the logs should be in /var/log/ceph. These should be 
> rotated (see /etc/logrotate.d/ceph-common for details).

ok.  I see lots of

-----------------------
2021-01-05 20:38:05.900 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
2021-01-05 20:38:07.208 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
2021-01-05 20:38:08.688 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
2021-01-05 20:38:08.744 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
2021-01-05 20:38:09.092 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
2021-01-05 20:38:12.268 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
2021-01-05 20:38:12.468 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
2021-01-05 20:38:12.964 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
2021-01-05 20:38:15.752 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
2021-01-05 20:38:17.440 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
2021-01-05 20:38:19.388 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
2021-01-05 20:38:19.468 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
2021-01-05 20:38:22.712 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
2021-01-05 20:38:22.828 7f979e753700  1 mon.odcf-pve02 at -1(probing) e4 
handle_auth_request failed to assign global_id
-----------------------

in the mon log on the problematic host.

When (unsuccessfully) starting the monitor through the UI, the following 
entries appear in ceph.audit.log:

-----------------------
2021-01-05 20:40:07.635369 mon.odcf-pve03 (mon.1) 288082 : audit [DBG] 
from='client.? 192.168.255.2:0/2418486168' entity='client.admin' 
cmd=[{"format":"json","prefix":"mgr metadata"}]: dispatch
2021-01-05 20:40:07.636592 mon.odcf-pve03 (mon.1) 288083 : audit [DBG] 
from='client.? 192.168.255.2:0/2418486168' entity='client.admin' 
cmd=[{"format":"json","prefix":"mgr dump"}]: dispatch
2021-01-05 20:40:08.296793 mon.odcf-pve03 (mon.1) 288084 : audit [DBG] 
from='client.? 192.168.255.2:0/778781756' entity='client.admin' 
cmd=[{"format":"json","prefix":"mon metadata"}]: dispatch
2021-01-05 20:40:08.297767 mon.odcf-pve03 (mon.1) 288085 : audit [DBG] 
from='client.? 192.168.255.2:0/778781756' entity='client.admin' 
cmd=[{"prefix":"quorum_status","format":"json"}]: dispatch
2021-01-05 20:40:08.436982 mon.odcf-pve01 (mon.0) 389632 : audit [DBG] 
from='client.? 192.168.255.2:0/784579843' entity='client.admin' 
cmd=[{"format":"json","prefix":"df"}]: dispatch
-----------------------

192.168.255.2 is the IP number of the problematic host in the Ceph mesh 
network. odcf-pve01 and odcf-pve03 are the "good" nodes.

However I am not sure, what kind of information I should look for in the 
logs

Frank

> 
> Regards,
> 
>      Uwe
> 
> 
> 
>>
>>> Can you provide the list of installed packages of the affected host 
>>> and the rest of the cluster?
>>
>> let me compile the lists and post them somewhere.  They are quite long.
>>
>>>
>>> Is the output of "ceph status" the same for all hosts?
>>
>> yes
>>
>> Frank
>>
>>>
>>>
>>> Regards,
>>>
>>>      Uwe
>>>
>>> Am 05.01.21 um 20:01 schrieb Frank Thommen:
>>>>
>>>> On 04.01.21 12:44, Frank Thommen wrote:
>>>>>
>>>>> Dear all,
>>>>>
>>>>> one of our three PVE hypervisors in the cluster crashed (it was 
>>>>> fenced successfully) and rebooted automatically.  I took the chance 
>>>>> to do a complete dist-upgrade and rebooted again.
>>>>>
>>>>> The PVE Ceph dashboard now reports, that
>>>>>
>>>>>    * the monitor on the host is down (out of quorum), and
>>>>>    * "A newer version was installed but old version still running, 
>>>>> please restart"
>>>>>
>>>>> The Ceph UI reports monitor version 14.2.11 while in fact 14.2.16 
>>>>> is installed. The hypervisor has been rebooted twice since the 
>>>>> upgrade, so it should be basically impossible that the old version 
>>>>> is still running.
>>>>>
>>>>> `systemctl restart ceph.target` and restarting the monitor through 
>>>>> the PVE Ceph UI didn't help. The hypervisor is running PVE 6.3-3 
>>>>> (the other two are running 6.3-2 with monitor 14.2.15)
>>>>>
>>>>> What to do in this situation?
>>>>>
>>>>> I am happy with either UI or commandline instructions, but I have 
>>>>> no Ceph experience besides setting up it up following the PVE 
>>>>> instructions.
>>>>>
>>>>> Any help or hint is appreciated.
>>>>> Cheers, Frank
>>>>
>>>> In an attempt to fix the issue I destroyed the monitor through the 
>>>> UI and recreated it.  Unfortunately it can still not be started.  A 
>>>> popup tells me that the monitor has been started, but the overview 
>>>> still shows "stopped" and there is no version number any more.
>>>>
>>>> Then I stopped and started Ceph on the node (`pveceph stop; pveceph 
>>>> start`) which resulted in a degraded cluster (1 host down, 7 of 21 
>>>> OSDs down). OSDs cannot be started through the UI either.
>>>>
>>>> I feel extremely uncomfortable with this situation and would 
>>>> appreciate any hint as to how I should proceed with the problem.
>>>>
>>>> Cheers, Frank
>>>>
>>>> _______________________________________________
>>>> pve-user mailing list
>>>> pve-user at lists.proxmox.com
>>>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>>
>>> _______________________________________________
>>> pve-user mailing list
>>> pve-user at lists.proxmox.com
>>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>
>> _______________________________________________
>> pve-user mailing list
>> pve-user at lists.proxmox.com
>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> 
> _______________________________________________
> pve-user mailing list
> pve-user at lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user



More information about the pve-user mailing list