From ralf.storm at konzept-is.de Fri Aug 6 13:16:39 2021 From: ralf.storm at konzept-is.de (Ralf Storm) Date: Fri, 6 Aug 2021 13:16:39 +0200 Subject: [PVE-User] PBS Error "got wrong command id" Message-ID: <034565d1-08b6-bd89-fb29-7c7d4493433c@konzept-is.de> Hello, can somebody explain this error or had this befor? 101: 2021-08-05 20:00:02 INFO: creating Proxmox Backup Server archive 'vm/101/2021-08-05T18:00:02Z' 101: 2021-08-05 20:02:07 ERROR: VM 101 qmp command 'backup' failed - got timeout 101: 2021-08-05 20:02:07 INFO: aborting backup job 101: 2021-08-05 20:03:36 ERROR: VM 101 qmp command 'backup-cancel' failed - got wrong command id '30734:6' (expected 30734:7) 101: 2021-08-05 20:03:36 INFO: resuming VM again 101: 2021-08-05 20:03:36 ERROR: Backup of VM 101 failed - VM 101 qmp command 'backup' failed - got timeout best regards -- Ralf Storm Systemadministrator Konzept Informationssysteme GmbH From leandro at tecnetmza.com.ar Tue Aug 17 16:37:49 2021 From: leandro at tecnetmza.com.ar (Leandro Roggerone) Date: Tue, 17 Aug 2021 11:37:49 -0300 Subject: [PVE-User] (no subject) Message-ID: root at pve:~# apt-get update Get:1 http://security.debian.org buster/updates InRelease [65.4 kB] Get:2 http://ftp.debian.org/debian buster InRelease [122 kB] Get:3 http://ftp.debian.org/debian buster-updates InRelease [51.9 kB] Reading package lists... Done E: Repository 'http://security.debian.org buster/updates InRelease' changed its 'Suite' value from 'stable' to 'oldstable' N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details. E: Repository 'http://ftp.debian.org/debian buster InRelease' changed its 'Suite' value from 'stable' to 'oldstable' N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details. E: Repository 'http://ftp.debian.org/debian buster-updates InRelease' changed its 'Suite' value from 'stable-updates' to 'oldstable-updates' N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details. This is my source.list root at pve:~# cat /etc/apt/sources.list deb http://ftp.debian.org/debian buster main contrib deb http://ftp.debian.org/debian buster-updates main contrib # security updates deb http://security.debian.org buster/updates main contrib This was working ok until sat 14. Any idea ? Thanks! Libre de virus. www.avast.com <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> From martin at holub.co.at Tue Aug 17 16:43:30 2021 From: martin at holub.co.at (Martin Holub) Date: Tue, 17 Aug 2021 16:43:30 +0200 Subject: [PVE-User] (no subject) In-Reply-To: References: Message-ID: <7d867c37-c47c-9667-179e-aecc73d7eecd@holub.co.at> Hi, On Aug 14th "Bullseye" was released, therefore Buster moved from "stable" to "oldstable" and Bullseye became the new "stable" Version of Debian. Cheers. Martin Am 17.08.21 um 16:37 schrieb Leandro Roggerone: > root at pve:~# apt-get update > Get:1 http://security.debian.org buster/updates InRelease [65.4 kB] > Get:2 http://ftp.debian.org/debian buster InRelease [122 kB] > Get:3 http://ftp.debian.org/debian buster-updates InRelease [51.9 kB] > Reading package lists... Done > > > E: Repository 'http://security.debian.org buster/updates InRelease' changed > its 'Suite' value from 'stable' to 'oldstable' > N: This must be accepted explicitly before updates for this repository can > be applied. See apt-secure(8) manpage for details. > E: Repository 'http://ftp.debian.org/debian buster InRelease' changed its > 'Suite' value from 'stable' to 'oldstable' > N: This must be accepted explicitly before updates for this repository can > be applied. See apt-secure(8) manpage for details. > E: Repository 'http://ftp.debian.org/debian buster-updates InRelease' > changed its 'Suite' value from 'stable-updates' to 'oldstable-updates' > N: This must be accepted explicitly before updates for this repository can > be applied. See apt-secure(8) manpage for details. > > This is my source.list > root at pve:~# cat /etc/apt/sources.list > deb http://ftp.debian.org/debian buster main contrib > > deb http://ftp.debian.org/debian buster-updates main contrib > > # security updates > deb http://security.debian.org buster/updates main contrib > > This was working ok until sat 14. > Any idea ? > Thanks! > > > Libre > de virus. www.avast.com > > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > _______________________________________________ > pve-user mailing list > pve-user at lists.proxmox.com > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > From adamw at matrixscience.com Wed Aug 18 13:10:41 2021 From: adamw at matrixscience.com (Adam Weremczuk) Date: Wed, 18 Aug 2021 12:10:41 +0100 Subject: [PVE-User] stuck container Message-ID: <39b5815a-c591-8c08-21ce-fb441dff8bb3@matrixscience.com> Hi all, Host PVE version: 6.2-6, Debian 10.4 Dual host set up using zfs and replication. Container: Debian 10.10 The container responds to ping and telnet to SSH port but I can't ssh to it, access via PVE console or stop/start it seeing all sorts of errors: command 'lxc-stop -n 100 --timeout 5' failed: got timeout TASK ERROR: received interrupt command 'lxc-stop -n 100 --timeout 5' failed: got timeout TASK ERROR: got unexpected control message: trying to acquire lock... TASK ERROR: can't lock file '/run/lock/lxc/pve-config-100.lock' - got timeout malformed authentication string TASK ERROR: command '/usr/bin/termproxy 5901 --path /vms/101 --perm VM.Console -- /usr/bin/dtach -A /var/run/dtach/vzctlconsole101 -r winch -z lxc-console -n 101 -e -1' failed: exit code 255 From the shell I tried deleting /run/lock/lxc/pve-config-100.lock, killing all processes referring to container 100 and starting it but no joy: pct reboot 100 --timeout 5 trying to acquire lock... can't lock file '/run/lock/lxc/pve-config-100.lock' - got timeout pct stop 100 --skiplock 1 trying to acquire lock... can't lock file '/run/lock/lxc/pve-config-100.lock' - got timeout pct shutdown 100 --forceStop 1 --timeout 5 trying to acquire lock... can't lock file '/run/lock/lxc/pve-config-100.lock' - got timeout pct stop 100 --skiplock 1 [stalls here] All the other containers appear to be running fine. Any ideas? Thanks, Adam From leandro at tecnetmza.com.ar Wed Aug 18 15:19:18 2021 From: leandro at tecnetmza.com.ar (Leandro Roggerone) Date: Wed, 18 Aug 2021 10:19:18 -0300 Subject: [PVE-User] (no subject) In-Reply-To: References: Message-ID: thanks Martin. According to documentation , for a non subscription environment ,this is how it should looks like: root at pve:/etc/apt# cat /etc/apt/sources.list deb http://ftp.debian.org/debian bullseye main contrib deb http://ftp.debian.org/debian bullseye-updates main contrib # security updates deb http://security.debian.org/debian-security bullseye-security main contrib After running apt-get update from cli , it did not return any error. seems to be working ok now. Thanks again. Leandro. El mar, 17 ago 2021 a las 11:44, Martin Holub via pve-user (< pve-user at lists.proxmox.com>) escribi?: > > > > ---------- Forwarded message ---------- > From: Martin Holub > To: pve-user at lists.proxmox.com > Cc: > Bcc: > Date: Tue, 17 Aug 2021 16:43:30 +0200 > Subject: Re: [PVE-User] (no subject) > Hi, > > On Aug 14th "Bullseye" was released, therefore Buster moved from > "stable" to "oldstable" and Bullseye became the new "stable" Version of > Debian. > > Cheers. > Martin > > Am 17.08.21 um 16:37 schrieb Leandro Roggerone: > > root at pve:~# apt-get update > > Get:1 http://security.debian.org buster/updates InRelease [65.4 kB] > > Get:2 http://ftp.debian.org/debian buster InRelease [122 kB] > > Get:3 http://ftp.debian.org/debian buster-updates InRelease [51.9 kB] > > Reading package lists... Done > > > > > > E: Repository 'http://security.debian.org buster/updates InRelease' > changed > > its 'Suite' value from 'stable' to 'oldstable' > > N: This must be accepted explicitly before updates for this repository > can > > be applied. See apt-secure(8) manpage for details. > > E: Repository 'http://ftp.debian.org/debian buster InRelease' changed > its > > 'Suite' value from 'stable' to 'oldstable' > > N: This must be accepted explicitly before updates for this repository > can > > be applied. See apt-secure(8) manpage for details. > > E: Repository 'http://ftp.debian.org/debian buster-updates InRelease' > > changed its 'Suite' value from 'stable-updates' to 'oldstable-updates' > > N: This must be accepted explicitly before updates for this repository > can > > be applied. See apt-secure(8) manpage for details. > > > > This is my source.list > > root at pve:~# cat /etc/apt/sources.list > > deb http://ftp.debian.org/debian buster main contrib > > > > deb http://ftp.debian.org/debian buster-updates main contrib > > > > # security updates > > deb http://security.debian.org buster/updates main contrib > > > > This was working ok until sat 14. > > Any idea ? > > Thanks! > > > > < > https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail > > > > Libre > > de virus. www.avast.com > > < > https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail > > > > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > > _______________________________________________ > > pve-user mailing list > > pve-user at lists.proxmox.com > > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > > > > ---------- Forwarded message ---------- > From: Martin Holub via pve-user > To: pve-user at lists.proxmox.com > Cc: Martin Holub > Bcc: > Date: Tue, 17 Aug 2021 16:43:30 +0200 > Subject: Re: [PVE-User] (no subject) > _______________________________________________ > pve-user mailing list > pve-user at lists.proxmox.com > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > Libre de virus. www.avast.com <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> From martin at holub.co.at Wed Aug 18 19:58:39 2021 From: martin at holub.co.at (Martin Holub) Date: Wed, 18 Aug 2021 19:58:39 +0200 Subject: [PVE-User] (no subject) In-Reply-To: References: Message-ID: Hi Leandro, Are you already on PVE7? Otherwise, just changing the Sources to Bullseye, i'm pretty shure that this will break things, or at least produce unwanted results. If you want to upgrade to Debian Bullseye better check https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0 Best regards Martin Am 18.08.21 um 15:19 schrieb Leandro Roggerone: > thanks Martin. > According to documentation , for a non subscription environment?,this > is how it should looks like: > > root at pve:/etc/apt# cat /etc/apt/sources.list > deb http://ftp.debian.org/debian > bullseye main contrib > > deb http://ftp.debian.org/debian > bullseye-updates main contrib > > # security updates > deb http://security.debian.org/debian-security > bullseye-security main > contrib > > After?running apt-get update from cli , it did not return any error. > seems to be working ok now. > Thanks again. > Leandro. > > El mar, 17 ago 2021 a las 11:44, Martin Holub via pve-user > (>) > escribi?: > > > > > ---------- Forwarded message ---------- > From:?Martin Holub > > To: pve-user at lists.proxmox.com > Cc: > Bcc: > Date:?Tue, 17 Aug 2021 16:43:30 +0200 > Subject:?Re: [PVE-User] (no subject) > Hi, > > On Aug 14th "Bullseye" was released, therefore Buster moved from > "stable" to "oldstable" and Bullseye became the new "stable" > Version of > Debian. > > Cheers. > Martin > > Am 17.08.21 um 16:37 schrieb Leandro Roggerone: > > root at pve:~# apt-get update > > Get:1 http://security.debian.org > buster/updates InRelease [65.4 kB] > > Get:2 http://ftp.debian.org/debian > buster InRelease [122 kB] > > Get:3 http://ftp.debian.org/debian > buster-updates InRelease [51.9 kB] > > Reading package lists... Done > > > > > > E: Repository 'http://security.debian.org > buster/updates InRelease' changed > > its 'Suite' value from 'stable' to 'oldstable' > > N: This must be accepted explicitly before updates for this > repository can > > be applied. See apt-secure(8) manpage for details. > > E: Repository 'http://ftp.debian.org/debian > buster InRelease' changed its > > 'Suite' value from 'stable' to 'oldstable' > > N: This must be accepted explicitly before updates for this > repository can > > be applied. See apt-secure(8) manpage for details. > > E: Repository 'http://ftp.debian.org/debian > buster-updates InRelease' > > changed its 'Suite' value from 'stable-updates' to > 'oldstable-updates' > > N: This must be accepted explicitly before updates for this > repository can > > be applied. See apt-secure(8) manpage for details. > > > > This is my source.list > > root at pve:~# cat /etc/apt/sources.list > > deb http://ftp.debian.org/debian > buster main contrib > > > > deb http://ftp.debian.org/debian > buster-updates main contrib > > > > # security updates > > deb http://security.debian.org > buster/updates main contrib > > > > This was working ok until sat 14. > > Any idea ? > > Thanks! > > > > > > > > Libre > > de virus. www.avast.com > > > > > > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > > _______________________________________________ > > pve-user mailing list > > pve-user at lists.proxmox.com > > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > > > > > ---------- Forwarded message ---------- > From:?Martin Holub via pve-user > > To: pve-user at lists.proxmox.com > Cc:?Martin Holub > > Bcc: > Date:?Tue, 17 Aug 2021 16:43:30 +0200 > Subject:?Re: [PVE-User] (no subject) > _______________________________________________ > pve-user mailing list > pve-user at lists.proxmox.com > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > > Libre de virus. www.avast.com > > > From aderumier at odiso.com Thu Aug 19 07:54:22 2021 From: aderumier at odiso.com (alexandre derumier) Date: Thu, 19 Aug 2021 07:54:22 +0200 Subject: [PVE-User] frr 7.5 : another evpn bug , could we force a 7.4 version for now ? Message-ID: <801dc1643b461b76c68c739b4603912d03dc3be8.camel@odiso.com> Hi, I have found another critical bug with evpn and frr 7.5. It seem that mac, mac-ip route are lost when frr daemon is restarted and they never come back until the vm is stop/start. (Seem to be related to their new code for evpn multi-homing). It don't seem to fixed in frr 8.0 or master branch. I had fixed another bug last week, seem to be related too. So, I think until it's fixed, we should rollback to frr 7.4. could we make?a fake 7.5 package with 7.4 version ? (to not be override by debian official package ?) we have done it once with "7.2-2+pve~really7.1+stable1" BTW, we need to be carefull with package versioning naming, because the current 7.5.1-1+pve , don't have the priority vs the debian package. apt-cache policy frr frr: Installed: 7.5.1-1+pve Candidate: 7.5.1-1.1 7.5.1-1.1 990 990 http://ftp.be.debian.org/debian bullseye/main amd64 Packages 7.5.1-1+pve 990 990 http://download.proxmox.com/debian/pve bullseye/pve-no- subscription amd64 Packages From f.cuseo at panservice.it Thu Aug 19 17:58:29 2021 From: f.cuseo at panservice.it (Fabrizio Cuseo) Date: Thu, 19 Aug 2021 17:58:29 +0200 (CEST) Subject: [PVE-User] PBS 2.0 with pve 6.4 Message-ID: <834518548.61504.1629388709014.JavaMail.zimbra@zimbra.panservice.it> Hello. Someone is using proxmox backup server 2.X with the last PVE 6.4 ? If yes, someone have installed on PVE 6.4, backup client 2.X using repository: "deb http://download.proxmox.com/debian/pbs-client buster main " ? I would like to have LVM file restore, but now i don't want to upgrade my cluster. Regards, Fabrizio From leandro at tecnetmza.com.ar Mon Aug 23 14:38:02 2021 From: leandro at tecnetmza.com.ar (Leandro Roggerone) Date: Mon, 23 Aug 2021 09:38:02 -0300 Subject: [PVE-User] temperature alert Message-ID: Hi guys , during last weeks I have been seen some high temperature alerts on my librenms platform. I wanted to share this experience with you: My pve box is reporting 70? max peaks on some cores. All cores are permanently working between 35? and 65? High temp trigger got from snmp is 65?. CPU usage readed on pve summary tab is near 20. Have following thoughts: Is it possible to check historic box temperature directly on pve ? (can not find where) What is the normal temperature working range on your box / cpu usage ? Should I rise the high temperature trigger ? Is it possible to check fans without outage somehow ? Thanks. Leo. Libre de virus. www.avast.com <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> From leandro at tecnetmza.com.ar Tue Aug 24 17:13:03 2021 From: leandro at tecnetmza.com.ar (Leandro Roggerone) Date: Tue, 24 Aug 2021 12:13:03 -0300 Subject: [PVE-User] (no subject) In-Reply-To: References: Message-ID: Hello , Martin. Im still in pve 6.04. I was looking at the document you pointed out (Upgrade from 6.x to 7.0) It is frustrating to see that upgrading is a very difficult process. My cluster contains 2 servers. Both are in production , at 50 - 60 % storage and memory capacity so it is not easy for me to create backups and move VMs. I will study how to proceed with this update from pve 6 to 7. Perhaps: Adding a third new box already running version 7. Adding a networking storage ? need to check out wich one. Meanwhile , until I can go to pve 7 , I think I should upgrate to latest pve 6 and disable automatic upgrades ... Do you think it is ok ? Thanks for your words!! Leandro. El mi?, 18 ago 2021 a las 14:58, Martin Holub () escribi?: > Hi Leandro, > > Are you already on PVE7? Otherwise, just changing the Sources to Bullseye, > i'm pretty shure that this will break things, or at least produce unwanted > results. If you want to upgrade to Debian Bullseye better check > https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0 > > Best regards > Martin > Am 18.08.21 um 15:19 schrieb Leandro Roggerone: > > thanks Martin. > According to documentation , for a non subscription environment ,this is > how it should looks like: > > root at pve:/etc/apt# cat /etc/apt/sources.list > deb http://ftp.debian.org/debian bullseye main contrib > > deb http://ftp.debian.org/debian bullseye-updates main contrib > > # security updates > deb http://security.debian.org/debian-security bullseye-security main > contrib > > After running apt-get update from cli , it did not return any error. > seems to be working ok now. > Thanks again. > Leandro. > > El mar, 17 ago 2021 a las 11:44, Martin Holub via pve-user (< > pve-user at lists.proxmox.com>) escribi?: > >> >> >> >> ---------- Forwarded message ---------- >> From: Martin Holub >> To: pve-user at lists.proxmox.com >> Cc: >> Bcc: >> Date: Tue, 17 Aug 2021 16:43:30 +0200 >> Subject: Re: [PVE-User] (no subject) >> Hi, >> >> On Aug 14th "Bullseye" was released, therefore Buster moved from >> "stable" to "oldstable" and Bullseye became the new "stable" Version of >> Debian. >> >> Cheers. >> Martin >> >> Am 17.08.21 um 16:37 schrieb Leandro Roggerone: >> > root at pve:~# apt-get update >> > Get:1 http://security.debian.org buster/updates InRelease [65.4 kB] >> > Get:2 http://ftp.debian.org/debian buster InRelease [122 kB] >> > Get:3 http://ftp.debian.org/debian buster-updates InRelease [51.9 kB] >> > Reading package lists... Done >> > >> > >> > E: Repository 'http://security.debian.org buster/updates InRelease' >> changed >> > its 'Suite' value from 'stable' to 'oldstable' >> > N: This must be accepted explicitly before updates for this repository >> can >> > be applied. See apt-secure(8) manpage for details. >> > E: Repository 'http://ftp.debian.org/debian buster InRelease' changed >> its >> > 'Suite' value from 'stable' to 'oldstable' >> > N: This must be accepted explicitly before updates for this repository >> can >> > be applied. See apt-secure(8) manpage for details. >> > E: Repository 'http://ftp.debian.org/debian buster-updates InRelease' >> > changed its 'Suite' value from 'stable-updates' to 'oldstable-updates' >> > N: This must be accepted explicitly before updates for this repository >> can >> > be applied. See apt-secure(8) manpage for details. >> > >> > This is my source.list >> > root at pve:~# cat /etc/apt/sources.list >> > deb http://ftp.debian.org/debian buster main contrib >> > >> > deb http://ftp.debian.org/debian buster-updates main contrib >> > >> > # security updates >> > deb http://security.debian.org buster/updates main contrib >> > >> > This was working ok until sat 14. >> > Any idea ? >> > Thanks! >> > >> > < >> https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail >> > >> > Libre >> > de virus. www.avast.com >> > < >> https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail >> > >> > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >> > _______________________________________________ >> > pve-user mailing list >> > pve-user at lists.proxmox.com >> > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user >> > >> >> >> >> >> ---------- Forwarded message ---------- >> From: Martin Holub via pve-user >> To: pve-user at lists.proxmox.com >> Cc: Martin Holub >> Bcc: >> Date: Tue, 17 Aug 2021 16:43:30 +0200 >> Subject: Re: [PVE-User] (no subject) >> _______________________________________________ >> pve-user mailing list >> pve-user at lists.proxmox.com >> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user >> > > > Libre > de virus. www.avast.com > > > From alain.pean at c2n.upsaclay.fr Tue Aug 24 17:36:04 2021 From: alain.pean at c2n.upsaclay.fr (=?UTF-8?Q?Alain_P=c3=a9an?=) Date: Tue, 24 Aug 2021 17:36:04 +0200 Subject: [PVE-User] (no subject) In-Reply-To: References: Message-ID: <81c194c7-1d5f-1178-2200-51f80d093eb1@c2n.upsaclay.fr> Le 24/08/2021 ? 17:13, Leandro Roggerone a ?crit?: > Hello , Martin. > Im still in pve 6.04. > I was looking at the document you pointed out (Upgrade from 6.x to 7.0) > It is frustrating to see that upgrading is a very difficult process. > My cluster contains 2 servers. > Both are in production , at 50 - 60 % storage and memory capacity so it is > not easy for me to create backups and move VMs. > > I will study how to proceed with this update from pve 6 to 7. > Perhaps: > Adding a third new box already running version 7. > Adding a networking storage ? need to check out wich one. > > Meanwhile , until I can go to pve 7 , I think I should upgrate to latest > pve 6 and disable automatic upgrades ... > Do you think it is ok ? Hello Leandro, If you are under Proxmox 6.4, you cannot move "accidentaly", by software upgrades, to 7.0. Because 6.x is based on Debian 10, and 7.x on Debian 11, so you have to change the repository to point to the newer release. What I do personnaly is to test the upgrade on a test cluster, to see how it works. I have an old server on which I setup a nested proxmox ve cluster with three small VMs. I test the upgrade process on this nested cluster, before applying it to production cluster. For your produxtion cluster, you should have backups of your VMs (for example on an NFS storage). It would be indeed a good thing to have ? third host to have a minimum cluster with quorum. Good luck ! Alain -- Administrateur Syst?me/R?seau C2N Centre de Nanosciences et Nanotechnologies (UMR 9001) Boulevard Thomas Gobert (ex Avenue de La Vauve), 91120 Palaiseau Tel : 01-70-27-06-88 Bureau A255 From martin at holub.co.at Tue Aug 24 19:21:34 2021 From: martin at holub.co.at (Martin Holub) Date: Tue, 24 Aug 2021 19:21:34 +0200 Subject: [PVE-User] (no subject) In-Reply-To: References: Message-ID: <1aca635b-412d-c199-2382-629b16457939@holub.co.at> Hi Leandro, So if you can't schedule a downtime for, at least, some VMs i would add a 3rd Box. Also in terms of having a valid Quorum a 3rd Box would be a good thing. About the Upgrade, as Alain pointed out, there is no way to accidentially upgrade, at least if you don't put "bullseye" in the sources.list manually (like you did, that's why i asked about the Upgrade). So just make shure you explicitly use "buster", not "stable" or "bullseye" in the Debian repo. If apt still complains about the release change just run an update using "apt-get update --allow-releaseinfo-change", this should fix things you. If you already upgraded some packages from the bullseye repo i would keep things running as they are for now (obviously nothing broke by now, so don't touch it...) and start planning the Upgrade to 7.0. The Upgrade to 7.0 was hassle free for the Clusters i ran it by now. Also telling from Forum and Mailing Lists, i wouldn't expect any issues as long as you don't have any special setups with PCI passthrough Devices or something like that. Best Martin Am 24.08.21 um 17:13 schrieb Leandro Roggerone: > Hello , Martin. > Im still?in pve 6.04. > I was looking at the document you pointed out (Upgrade from 6.x to 7.0) > It is frustrating?to see that upgrading ?is a very difficult process. > My cluster contains 2 servers. > Both are in production , at 50 - 60 % storage and memory capacity so > it is not easy for me to create backups and move VMs. > > I will study how to proceed with this update from pve 6? to 7. > Perhaps: > Adding a third new box already running version 7. > Adding a networking storage ? need to check out wich one. > > Meanwhile , until?I can go to pve 7 , I think I should upgrate to > latest pve 6 and disable automatic upgrades ... > Do you think it is ok ? > > Thanks for your words!! > Leandro. > > > El mi?, 18 ago 2021 a las 14:58, Martin Holub ( >) escribi?: > > Hi Leandro, > > Are you already on PVE7? Otherwise, just changing the Sources to > Bullseye, i'm pretty shure that this will break things, or at > least produce unwanted results. If you want to upgrade to Debian > Bullseye better check > https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0 > > > Best regards > Martin > > Am 18.08.21 um 15:19 schrieb Leandro Roggerone: >> thanks Martin. >> According to documentation , for a non subscription >> environment?,this is how it should looks like: >> >> root at pve:/etc/apt# cat /etc/apt/sources.list >> deb http://ftp.debian.org/debian >> bullseye main contrib >> >> deb http://ftp.debian.org/debian >> bullseye-updates main contrib >> >> # security updates >> deb http://security.debian.org/debian-security >> bullseye-security >> main contrib >> >> After?running apt-get update from cli , it did not return any error. >> seems to be working ok now. >> Thanks again. >> Leandro. >> >> El mar, 17 ago 2021 a las 11:44, Martin Holub via pve-user >> (> >) escribi?: >> >> >> >> >> ---------- Forwarded message ---------- >> From:?Martin Holub > > >> To: pve-user at lists.proxmox.com >> >> Cc: >> Bcc: >> Date:?Tue, 17 Aug 2021 16:43:30 +0200 >> Subject:?Re: [PVE-User] (no subject) >> Hi, >> >> On Aug 14th "Bullseye" was released, therefore Buster moved from >> "stable" to "oldstable" and Bullseye became the new "stable" >> Version of >> Debian. >> >> Cheers. >> Martin >> >> Am 17.08.21 um 16:37 schrieb Leandro Roggerone: >> > root at pve:~# apt-get update >> > Get:1 http://security.debian.org >> buster/updates InRelease [65.4 kB] >> > Get:2 http://ftp.debian.org/debian >> buster InRelease [122 kB] >> > Get:3 http://ftp.debian.org/debian >> buster-updates InRelease [51.9 kB] >> > Reading package lists... Done >> > >> > >> > E: Repository 'http://security.debian.org >> buster/updates InRelease' changed >> > its 'Suite' value from 'stable' to 'oldstable' >> > N: This must be accepted explicitly before updates for this >> repository can >> > be applied. See apt-secure(8) manpage for details. >> > E: Repository 'http://ftp.debian.org/debian >> buster InRelease' changed its >> > 'Suite' value from 'stable' to 'oldstable' >> > N: This must be accepted explicitly before updates for this >> repository can >> > be applied. See apt-secure(8) manpage for details. >> > E: Repository 'http://ftp.debian.org/debian >> buster-updates InRelease' >> > changed its 'Suite' value from 'stable-updates' to >> 'oldstable-updates' >> > N: This must be accepted explicitly before updates for this >> repository can >> > be applied. See apt-secure(8) manpage for details. >> > >> > This is my source.list >> > root at pve:~# cat /etc/apt/sources.list >> > deb http://ftp.debian.org/debian >> buster main contrib >> > >> > deb http://ftp.debian.org/debian >> buster-updates main contrib >> > >> > # security updates >> > deb http://security.debian.org >> buster/updates main contrib >> > >> > This was working ok until sat 14. >> > Any idea ? >> > Thanks! >> > >> > >> > > >> > Libre >> > de virus. www.avast.com >> > >> > > >> > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >> > _______________________________________________ >> > pve-user mailing list >> > pve-user at lists.proxmox.com >> > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user >> >> > >> >> >> >> >> ---------- Forwarded message ---------- >> From:?Martin Holub via pve-user > > >> To: pve-user at lists.proxmox.com >> >> Cc:?Martin Holub > >> Bcc: >> Date:?Tue, 17 Aug 2021 16:43:30 +0200 >> Subject:?Re: [PVE-User] (no subject) >> _______________________________________________ >> pve-user mailing list >> pve-user at lists.proxmox.com >> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user >> >> >> >> >> Libre de virus. www.avast.com >> >> >> From leandro at tecnetmza.com.ar Wed Aug 25 14:11:09 2021 From: leandro at tecnetmza.com.ar (Leandro Roggerone) Date: Wed, 25 Aug 2021 09:11:09 -0300 Subject: [PVE-User] (no subject) In-Reply-To: <1aca635b-412d-c199-2382-629b16457939@holub.co.at> References: <1aca635b-412d-c199-2382-629b16457939@holub.co.at> Message-ID: ok , guys ... I think I will add a third box but it will take some time. Meanwhile: Currently i'm using following repo: deb http://ftp.debian.org/debian bullseye main contrib deb http://ftp.debian.org/debian bullseye-updates main contrib # security updates deb http://security.debian.org/debian-security bullseye-security main contrib I have never run any manual upgrade however the system is running the apt-get update command once a day. a) Does It means I should not try to go back to the buster repo ? b)Since Im still running pve 6 , if It is possible to fix my repolist , wich should I use ? Before I got the update alert I was using this: deb http://ftp.debian.org/debian buster main contrib deb http://ftp.debian.org/debian buster-updates main contrib # security updates deb http://security.debian.org buster/updates main contrib c) Is it possible to confirm if some packages have been upgraded ? So I can decide to whether to go back to buster , keep using bullseye. d) If there is no chance to change the repolist to the proper one , should I disable automatic updates to avoid the system crashes ? Thanks guys. Leandro. Libre de virus. www.avast.com <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> El mar, 24 ago 2021 a las 14:21, Martin Holub () escribi?: > Hi Leandro, > > So if you can't schedule a downtime for, at least, some VMs i would add a > 3rd Box. Also in terms of having a valid Quorum a 3rd Box would be a good > thing. > > About the Upgrade, as Alain pointed out, there is no way to accidentially > upgrade, at least if you don't put "bullseye" in the sources.list manually > (like you did, that's why i asked about the Upgrade). So just make shure > you explicitly use "buster", not "stable" or "bullseye" in the Debian repo. > If apt still complains about the release change just run an update using > "apt-get update --allow-releaseinfo-change", this should fix things you. If > you already upgraded some packages from the bullseye repo i would keep > things running as they are for now (obviously nothing broke by now, so > don't touch it...) and start planning the Upgrade to 7.0. The Upgrade to > 7.0 was hassle free for the Clusters i ran it by now. Also telling from > Forum and Mailing Lists, i wouldn't expect any issues as long as you don't > have any special setups with PCI passthrough Devices or something like > that. > > Best > Martin > Am 24.08.21 um 17:13 schrieb Leandro Roggerone: > > Hello , Martin. > Im still in pve 6.04. > I was looking at the document you pointed out (Upgrade from 6.x to 7.0) > It is frustrating to see that upgrading is a very difficult process. > My cluster contains 2 servers. > Both are in production , at 50 - 60 % storage and memory capacity so it is > not easy for me to create backups and move VMs. > > I will study how to proceed with this update from pve 6 to 7. > Perhaps: > Adding a third new box already running version 7. > Adding a networking storage ? need to check out wich one. > > Meanwhile , until I can go to pve 7 , I think I should upgrate to latest > pve 6 and disable automatic upgrades ... > Do you think it is ok ? > > Thanks for your words!! > Leandro. > > > El mi?, 18 ago 2021 a las 14:58, Martin Holub () > escribi?: > >> Hi Leandro, >> >> Are you already on PVE7? Otherwise, just changing the Sources to >> Bullseye, i'm pretty shure that this will break things, or at least produce >> unwanted results. If you want to upgrade to Debian Bullseye better check >> https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0 >> >> Best regards >> Martin >> Am 18.08.21 um 15:19 schrieb Leandro Roggerone: >> >> thanks Martin. >> According to documentation , for a non subscription environment ,this is >> how it should looks like: >> >> root at pve:/etc/apt# cat /etc/apt/sources.list >> deb http://ftp.debian.org/debian bullseye main contrib >> >> deb http://ftp.debian.org/debian bullseye-updates main contrib >> >> # security updates >> deb http://security.debian.org/debian-security bullseye-security main >> contrib >> >> After running apt-get update from cli , it did not return any error. >> seems to be working ok now. >> Thanks again. >> Leandro. >> >> El mar, 17 ago 2021 a las 11:44, Martin Holub via pve-user (< >> pve-user at lists.proxmox.com>) escribi?: >> >>> >>> >>> >>> ---------- Forwarded message ---------- >>> From: Martin Holub >>> To: pve-user at lists.proxmox.com >>> Cc: >>> Bcc: >>> Date: Tue, 17 Aug 2021 16:43:30 +0200 >>> Subject: Re: [PVE-User] (no subject) >>> Hi, >>> >>> On Aug 14th "Bullseye" was released, therefore Buster moved from >>> "stable" to "oldstable" and Bullseye became the new "stable" Version of >>> Debian. >>> >>> Cheers. >>> Martin >>> >>> Am 17.08.21 um 16:37 schrieb Leandro Roggerone: >>> > root at pve:~# apt-get update >>> > Get:1 http://security.debian.org buster/updates InRelease [65.4 kB] >>> > Get:2 http://ftp.debian.org/debian buster InRelease [122 kB] >>> > Get:3 http://ftp.debian.org/debian buster-updates InRelease [51.9 kB] >>> > Reading package lists... Done >>> > >>> > >>> > E: Repository 'http://security.debian.org buster/updates InRelease' >>> changed >>> > its 'Suite' value from 'stable' to 'oldstable' >>> > N: This must be accepted explicitly before updates for this repository >>> can >>> > be applied. See apt-secure(8) manpage for details. >>> > E: Repository 'http://ftp.debian.org/debian buster InRelease' changed >>> its >>> > 'Suite' value from 'stable' to 'oldstable' >>> > N: This must be accepted explicitly before updates for this repository >>> can >>> > be applied. See apt-secure(8) manpage for details. >>> > E: Repository 'http://ftp.debian.org/debian buster-updates InRelease' >>> > changed its 'Suite' value from 'stable-updates' to 'oldstable-updates' >>> > N: This must be accepted explicitly before updates for this repository >>> can >>> > be applied. See apt-secure(8) manpage for details. >>> > >>> > This is my source.list >>> > root at pve:~# cat /etc/apt/sources.list >>> > deb http://ftp.debian.org/debian buster main contrib >>> > >>> > deb http://ftp.debian.org/debian buster-updates main contrib >>> > >>> > # security updates >>> > deb http://security.debian.org buster/updates main contrib >>> > >>> > This was working ok until sat 14. >>> > Any idea ? >>> > Thanks! >>> > >>> > < >>> https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail >>> > >>> > Libre >>> > de virus. www.avast.com >>> > < >>> https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail >>> > >>> > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >>> > _______________________________________________ >>> > pve-user mailing list >>> > pve-user at lists.proxmox.com >>> > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user >>> > >>> >>> >>> >>> >>> ---------- Forwarded message ---------- >>> From: Martin Holub via pve-user >>> To: pve-user at lists.proxmox.com >>> Cc: Martin Holub >>> Bcc: >>> Date: Tue, 17 Aug 2021 16:43:30 +0200 >>> Subject: Re: [PVE-User] (no subject) >>> _______________________________________________ >>> pve-user mailing list >>> pve-user at lists.proxmox.com >>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user >>> >> >> >> Libre >> de virus. www.avast.com >> >> >> From lucas.salvatierra at edgeuno.com Fri Aug 27 18:47:08 2021 From: lucas.salvatierra at edgeuno.com (Lucas Gabriel Salvatierra) Date: Fri, 27 Aug 2021 13:47:08 -0300 Subject: [PVE-User] CIS Benchmark Fails Message-ID: Hello! I have found the following CIS Benchmark fails on PVE: 2576 - Disable IPv6 Shouldn't PVE have IPv6 disabled by default, and only as an option for those who use it? 2578 - Ensure packet redirect sending is disabled 2579 - Ensure IP forwarding is disabled 2580 - Ensure source routed packets are not accepted 2581 - Ensure ICMP redirects are not accepted 2582 - Ensure secure ICMP redirects are not accepted Furthermore, is packet redirecting required to be enabled by default? Wouldn't this potentially turn PVE into an attack vector? Cheers ?This communication is the property of EdgeUno or one of its group companies and/or affiliates. This electronic message contains information which may be privileged or confidential. The information is intended to be for the exclusive use of the individual(s) named above and if you are not the intended recipient be aware that any non-explicitly authorized disclosure, copying, distribution or use of the contents of this information, even if partially, including attached files, is strictly prohibited, and will be considered a criminal offense. Please notify legal at edgeuno.com about the unintended receipt of this electronic message and delete it.? From ooo at mechtilde.de Mon Aug 30 07:40:27 2021 From: ooo at mechtilde.de (Mechtilde) Date: Mon, 30 Aug 2021 07:40:27 +0200 Subject: [PVE-User] domain name to login? Message-ID: <4f4c815a-94cb-3b70-96a3-f52b753314c5@mechtilde.de> Hello, this morning I start Proxmox in a browser to login. I was ask for a domain name and the field is empty. Now the login failed. How can I set a value for this field. If you need more inforamtion please give me a hint I use it at Debian 10. Kind regards -- Mechtilde Stehmann ## PGP encryption welcome ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F -------------- next part -------------- A non-text attachment was scrubbed... Name: OpenPGP_signature Type: application/pgp-signature Size: 833 bytes Desc: OpenPGP digital signature URL: From ooo at mechtilde.de Mon Aug 30 08:22:02 2021 From: ooo at mechtilde.de (Mechtilde) Date: Mon, 30 Aug 2021 08:22:02 +0200 Subject: [PVE-User] domain name to login? In-Reply-To: <4f4c815a-94cb-3b70-96a3-f52b753314c5@mechtilde.de> References: <4f4c815a-94cb-3b70-96a3-f52b753314c5@mechtilde.de> Message-ID: Hello sorry for the noise. After some reboots, it works now Kind regards Am 30.08.21 um 07:40 schrieb Mechtilde: > Hello, > > this morning I start Proxmox in a browser to login. I was ask for a > domain name and the field is empty. Now the login failed. > How can I set a value for this field. > > If you need more inforamtion please give me a hint > > I use it at Debian 10. > > Kind regards > > > _______________________________________________ > pve-user mailing list > pve-user at lists.proxmox.com > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > -- Mechtilde Stehmann ## PGP encryption welcome ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F From lae at lae.is Tue Aug 31 04:30:51 2021 From: lae at lae.is (Musee Ullah) Date: Mon, 30 Aug 2021 21:30:51 -0500 Subject: Error building pve-qemu-kvm from source Message-ID: <2e65336f-1e1e-a30b-b0b9-3a69ef912210@lae.is> (note for mod: resending without buildlog attachment since it's been over a day now) Hi, I'm attempting to build pve-qemu-kvm with pulseaudio support, but I'm running into the following error and I'm not sure if there's a step missing or if there's an issue with the build process (as far as I can tell, it seems unlikely because I also can't compile a checked out 6.0.0-3 that's already out in the pve repos). [220/2951] Compiling C object vma.p/vma.c.o FAILED: vma.p/vma.c.o cc -Ivma.p -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -fdiagnostics-color=auto -pipe -Wall -Winvalid-pch -std=gnu99 -O2 -g -isystem /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/linux-headers -isystem linux-headers -iquote . -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/disas/libvixl -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/tcg/i386 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/accel/tcg -pthread -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-declaration -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wimplicit-fallthrough=2 -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-psabi -fstack-protector-strong -fPIE -MD -MQ vma.p/vma.c.o -MF vma.p/vma.c.o.d -o vma.p/vma.c.o -c ../vma.c In file included from ../vma.h:18, from ../vma.c:17: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include/qapi/error.h:275:10: fatal error: qapi/qapi-types-error.h: No such file or directory 275 | #include "qapi/qapi-types-error.h" | ^~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. (full build log [0]) The steps I'm taking to build the package are as follows (as unprivileged user): git clone git://git.proxmox.com/git/pve-qemu.git cd pve-qemu sed -i '/audio-drv-list/ s/alsa/alsa,pa/' debian/rules sudo mk-build-deps -ir make dinstall Are these all the steps necessary to build this package? (on another note I also attempted another build using --recursive in the git checkout, but the problem is still reproduced) I've attempted to compiled qemu 6.0.0 from upstream and it seems to generate and use `qapi-types.error.h` without issue, so I don't think this is a dependency issue. I believe scripts/qapi-gen.py is supposed to generate these files? Thanks in advance for your help. P.S. I also note that there's a thread from 2019 [0] with someone asking for pulseaudio driver support but it seems like nothing ever came of it. I understand that ideally PVE would want to support it via the qm utility but would it be possible to just compile the driver upstream before that (so users can pass custom -audiodev arguments for qemu theirselves)? [0]: https://gist.github.com/lae/dbc8e8c5d1846fe3b910c18e5e51cb2b [1]: https://forum.proxmox.com/threads/audiodev-driver-pa-support.62317/ -------------- next part -------------- A non-text attachment was scrubbed... Name: OpenPGP_signature Type: application/pgp-signature Size: 236 bytes Desc: OpenPGP digital signature URL: From s.reiter at proxmox.com Tue Aug 31 09:46:50 2021 From: s.reiter at proxmox.com (Stefan Reiter) Date: Tue, 31 Aug 2021 09:46:50 +0200 Subject: [PVE-User] Error building pve-qemu-kvm from source In-Reply-To: References: Message-ID: Hi! I just tried a clean build on a fresh Debian 11 container with the exact steps described by you, and it built me a .deb just fine. Even with the 'sed' command it worked, including PA support. Can you provide a bit more detail about your build environment? Have you configured the PVE APT repos on your host (for 'libproxmox-backup-qemu0-dev') before doing 'mk-build-deps'? As a shot in the dark, since the missing file is generated by a python script, maybe you're running into a Python 2/3 mixup somewhere? As for inclusion, I believe one of the points would be the dependency on pulseaudio (at least the libs) when compiled into QEMU, which I _think_ we don't have right now. Wouldn't be too much of an issue though imo... ~ Stefan On 31/08/2021 04:30, Musee Ullah via pve-user wrote: > _______________________________________________ > pve-user mailing list > pve-user at lists.proxmox.com > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > From lae at lae.is Tue Aug 31 11:39:13 2021 From: lae at lae.is (Musee Ullah) Date: Tue, 31 Aug 2021 04:39:13 -0500 Subject: [PVE-User] Error building pve-qemu-kvm from source In-Reply-To: References: Message-ID: <3a41fcbd-5e55-cafd-c6b9-906232b19667@lae.is> I think my repos are configured appropriately, as that package is found/was installed as expected: $ apt search libproxmox-backup-qemu0-dev Sorting... Done Full Text Search... Done libproxmox-backup-qemu0-dev/stable,now 1.2.0-1 amd64 [installed,automatic] ? Proxmox Backup Server client library for QEMU development files $ cat /etc/apt/sources.list.d/proxmox.list deb http://download.proxmox.com/debian/pve bullseye pve-no-subscription deb http://download.proxmox.com/debian/devel/ bullseye main No other repos configured other than a debian mirror for bullseye (debian, debian security and updates). Both Python 2.7 and 3.9 are installed, but qapi-gen.py does specify py3 and that seems to be fine... $ env /usr/bin/python3 -V Python 3.9.2 This host was deployed with PVE 6 using my Ansible role (lae.proxmox), and upgraded to PVE 7 via apt. Package/installation wise it hasn't been touched outside of that until I attempted to set it up for a build (and added the devel repo above during troubleshooting). Do you have any other ideas what might be causing it? Either way, seeing as it *should* be building with those steps, I guess I'll try building it inside a new host. Thanks for confirming. On 8/31/21 2:46 AM, Stefan Reiter wrote: > Hi! > > I just tried a clean build on a fresh Debian 11 container with the > exact steps described by you, and it built me a .deb just fine. Even > with the 'sed' command it worked, including PA support. > > Can you provide a bit more detail about your build environment? Have > you configured the PVE APT repos on your host (for > 'libproxmox-backup-qemu0-dev') before doing 'mk-build-deps'? > > As a shot in the dark, since the missing file is generated by a python > script, maybe you're running into a Python 2/3 mixup somewhere? > > As for inclusion, I believe one of the points would be the dependency > on pulseaudio (at least the libs) when compiled into QEMU, which I > _think_ we don't have right now. Wouldn't be too much of an issue > though imo... > > ~ Stefan -------------- next part -------------- A non-text attachment was scrubbed... Name: OpenPGP_signature Type: application/pgp-signature Size: 236 bytes Desc: OpenPGP digital signature URL: From mark at tuxis.nl Tue Aug 31 11:11:51 2021 From: mark at tuxis.nl (Mark Schouten) Date: Tue, 31 Aug 2021 11:11:51 +0200 Subject: [PVE-User] CIS Benchmark Fails In-Reply-To: Message-ID: <2608435298-24519@kerio.tuxis.nl> Hi, Please disregard any tool that advices you to disable IPv6 anno 2021. --? Mark Schouten CTO, Tuxis B.V. | https://www.tuxis.nl/ | +31 318 200208 From: Lucas Gabriel Salvatierra To: Sent: 2021-08-27 18:47 Subject: [PVE-User] CIS Benchmark Fails Hello! I have found the following CIS Benchmark fails on PVE: ? ?2576 - Disable IPv6 Shouldn't PVE have IPv6 disabled by default, and only as an option for those who use it? ? ?2578 - Ensure packet redirect sending is disabled ? ?2579 - Ensure IP forwarding is disabled ? ?2580 - Ensure source routed packets are not accepted ? ?2581 - Ensure ICMP redirects are not accepted ? ?2582 - Ensure secure ICMP redirects are not accepted Furthermore, is packet redirecting required to be enabled by default? Wouldn't this potentially turn PVE into an attack vector? Cheers ?This communication is the property of EdgeUno or one of its group companies and/or affiliates. This electronic message contains information which may be privileged or confidential. The information is intended to be for the exclusive use of the individual(s) named above and if you are not the intended recipient be aware that any non-explicitly authorized disclosure, copying, distribution or use of the contents of this information, even if partially, including attached files, is strictly prohibited, and will be considered a criminal offense. Please notify legal at edgeuno.com about the unintended receipt of this electronic message and delete it.? _______________________________________________ pve-user mailing list pve-user at lists.proxmox.com https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user From lae at lae.is Sun Aug 29 22:38:26 2021 From: lae at lae.is (Musee Ullah) Date: Sun, 29 Aug 2021 15:38:26 -0500 Subject: Error building pve-qemu-kvm from source Message-ID: Hi, Been a while. How are all the PVE Ansible role users doing? I'm attempting to build pve-qemu-kvm with pulseaudio support, but I'm running into the following error and I'm not sure if there's a step missing or if there's an issue with the build process (as far as I can tell, it seems unlikely because I also can't compile a checked out 6.0.0-3 that's already out in the pve repos). [220/2951] Compiling C object vma.p/vma.c.o FAILED: vma.p/vma.c.o cc -Ivma.p -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -fdiagnostics-color=auto -pipe -Wall -Winvalid-pch -std=gnu99 -O2 -g -isystem /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/linux-headers -isystem linux-headers -iquote . -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/disas/libvixl -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/tcg/i386 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/accel/tcg -pthread -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-declaration -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wimplicit-fallthrough=2 -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-psabi -fstack-protector-strong -fPIE -MD -MQ vma.p/vma.c.o -MF vma.p/vma.c.o.d -o vma.p/vma.c.o -c ../vma.c In file included from ../vma.h:18, from ../vma.c:17: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include/qapi/error.h:275:10: fatal error: qapi/qapi-types-error.h: No such file or directory 275 | #include "qapi/qapi-types-error.h" | ^~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. (full log attached) The steps I'm taking to build the package are as follows (as unprivileged user): git clone git://git.proxmox.com/git/pve-qemu.git cd pve-qemu sed -i '/audio-drv-list/ s/alsa/alsa,pa/' debian/rules sudo mk-build-deps -ir make dinstall (on another note I also attempted another build using --recursive in the git checkout, but the problem is still reproduced) I've attempted to compiled qemu 6.0.0 from upstream and it seems to generate and use `qapi-types.error.h` without issue, so I don't think this is a dependency issue. I believe scripts/qapi-gen.py is supposed to generate these files? Thanks in advance for your help. P.S. I also note that there's a thread from 2019 [0] with someone asking for pulseaudio driver support but it seems like nothing ever came of it. I understand that ideally PVE would want to support it via the qm utility but would it be possible to just compile the driver upstream before that (so users can pass custom -audiodev arguments for qemu theirselves)? [0] https://forum.proxmox.com/threads/audiodev-driver-pa-support.62317/ -------------- next part -------------- lae at lilienne:~/build$ git clone git://git.proxmox.com/git/pve-qemu.git Cloning into 'pve-qemu'... remote: Enumerating objects: 2657, done. remote: Counting objects: 100% (2657/2657), done. remote: Compressing objects: 100% (770/770), done. remote: Total 2657 (delta 1874), reused 2657 (delta 1874)s Receiving objects: 100% (2657/2657), 3.25 MiB | 1.58 MiB/s, done. Resolving deltas: 100% (1874/1874), done. lae at lilienne:~/build$ cd pve-qemu lae at lilienne:~/build/pve-qemu$ sed -i '/audio-drv-list/ s/alsa/alsa,pa/' debian/rules lae at lilienne:~/build/pve-qemu$ sudo mk-build-deps -ir dpkg-buildpackage: info: source package pve-qemu-kvm-build-deps dpkg-buildpackage: info: source version 6.0.0-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Equivs Dummy Package Generator dpkg-buildpackage: info: host architecture amd64 dpkg-source --before-build . debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf create-stamp debian/debhelper-build-stamp dh_prep dh_install dh_installdocs dh_installchangelogs dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'pve-qemu-kvm-build-deps' in '../pve-qemu-kvm-build-deps_6.0.0-3_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../pve-qemu-kvm-build-deps_6.0.0-3_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) The package has been created. Attention, the package has been created in the current directory, not in ".." as indicated by the message above! Selecting previously unselected package pve-qemu-kvm-build-deps. (Reading database ... 134806 files and directories currently installed.) Preparing to unpack pve-qemu-kvm-build-deps_6.0.0-3_all.deb ... Unpacking pve-qemu-kvm-build-deps (6.0.0-3) ... Reading package lists... Done Building dependency tree... Done Reading state information... Done Correcting dependencies...Starting pkgProblemResolver with broken count: 0 Starting 2 pkgProblemResolver with broken count: 0 Done Done Starting pkgProblemResolver with broken count: 0 Starting 2 pkgProblemResolver with broken count: 0 Done The following additional packages will be installed: check docutils-common libaio-dev libblkid-dev libcaca-dev libcap-ng-dev libfdt-dev libffi-dev libglib2.0-bin libglib2.0-dev libglib2.0-dev-bin libglu1-mesa libglu1-mesa-dev libiscsi-dev libjemalloc-dev libjs-sphinxdoc libjs-underscore libmount-dev libnuma-dev libpci-dev libpcre16-3 libpcre2-16-0 libpcre2-32-0 libpcre2-dev libpcre2-posix2 libpcre3-dev libpcre32-3 libpcrecpp0v5 libpixman-1-dev libproxmox-backup-qemu0-dev libpulse-dev libpulse-mainloop-glib0 librados-dev librbd-dev libsdl1.2-dev libseccomp-dev libselinux1-dev libsepol1-dev libslang2-dev libspice-protocol-dev libspice-server-dev libsubunit-dev libsubunit0 libsystemd-dev libtext-unidecode-perl liburing-dev libusb-1.0-0-dev libusbredirparser-dev libxext-dev meson python-babel-localedata python3-alabaster python3-babel python3-docutils python3-imagesize python3-pygments python3-roman python3-snowballstemmer python3-sphinx python3-tz quilt sgml-base sphinx-common tex-common texi2html texinfo uuid-dev x11proto-xext-dev xfslibs-dev xml-core Suggested packages: libgirepository1.0-dev libglib2.0-doc libxml2-utils seccomp libxext-doc docutils-doc fonts-linuxlibertine | ttf-linux-libertine texlive-lang-french texlive-latex-base texlive-latex-recommended python-pygments-doc ttf-bitstream-vera python3-stemmer dvipng fonts-freefont-otf imagemagick-6.q16 latexmk libjs-mathjax python3-sphinx-rtd-theme sphinx-doc texlive-fonts-recommended texlive-latex-extra texlive-plain-generic graphviz procmail sgml-base-doc latex2html texlive-base Recommended packages: libusb-1.0-doc libpaper-utils python3-pil The following NEW packages will be installed: check docutils-common libaio-dev libblkid-dev libcaca-dev libcap-ng-dev libfdt-dev libffi-dev libglib2.0-bin libglib2.0-dev libglib2.0-dev-bin libglu1-mesa libglu1-mesa-dev libiscsi-dev libjemalloc-dev libjs-sphinxdoc libjs-underscore libmount-dev libnuma-dev libpci-dev libpcre16-3 libpcre2-16-0 libpcre2-32-0 libpcre2-dev libpcre2-posix2 libpcre3-dev libpcre32-3 libpcrecpp0v5 libpixman-1-dev libproxmox-backup-qemu0-dev libpulse-dev libpulse-mainloop-glib0 librados-dev librbd-dev libsdl1.2-dev libseccomp-dev libselinux1-dev libsepol1-dev libslang2-dev libspice-protocol-dev libspice-server-dev libsubunit-dev libsubunit0 libsystemd-dev libtext-unidecode-perl liburing-dev libusb-1.0-0-dev libusbredirparser-dev libxext-dev meson python-babel-localedata python3-alabaster python3-babel python3-docutils python3-imagesize python3-pygments python3-roman python3-snowballstemmer python3-sphinx python3-tz quilt sgml-base sphinx-common tex-common texi2html texinfo uuid-dev x11proto-xext-dev xfslibs-dev xml-core 0 upgraded, 70 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 15.0 MB/21.3 MB of archives. After this operation, 103 MB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libsubunit0 amd64 1.4.0-3 [9,724 B] Get:2 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libsubunit-dev amd64 1.4.0-3 [10.7 kB] Get:3 http://dallas.mirrors.linode.com/debian bullseye/main amd64 check amd64 0.15.2-2 [115 kB] Get:4 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libjemalloc-dev amd64 5.2.1-3 [437 kB] Get:5 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpci-dev amd64 1:3.7.0-5 [60.6 kB] Get:6 http://dallas.mirrors.linode.com/debian bullseye/main amd64 librados-dev amd64 14.2.21-1 [106 kB] Get:7 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libslang2-dev amd64 2.3.2-5 [485 kB] Get:8 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libcaca-dev amd64 0.99.beta19-2.2 [893 kB] Get:9 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libglu1-mesa amd64 9.0.1-1 [168 kB] Get:10 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libglu1-mesa-dev amd64 9.0.1-1 [207 kB] Get:11 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpulse-mainloop-glib0 amd64 14.2-2 [42.1 kB] Get:12 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libffi-dev amd64 3.3-6 [56.5 kB] Get:13 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libglib2.0-bin amd64 2.66.8-1 [141 kB] Get:14 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libglib2.0-dev-bin amd64 2.66.8-1 [179 kB] Get:15 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libsepol1-dev amd64 3.1-1 [338 kB] Get:16 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre2-16-0 amd64 10.36-2 [231 kB] Get:17 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre2-32-0 amd64 10.36-2 [220 kB] Get:18 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre2-posix2 amd64 10.36-2 [49.1 kB] Get:19 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre2-dev amd64 10.36-2 [731 kB] Get:20 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libselinux1-dev amd64 3.1-3 [168 kB] Get:21 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre16-3 amd64 2:8.39-13 [259 kB] Get:22 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre32-3 amd64 2:8.39-13 [250 kB] Get:23 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcrecpp0v5 amd64 2:8.39-13 [152 kB] Get:24 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre3-dev amd64 2:8.39-13 [650 kB] Get:25 http://dallas.mirrors.linode.com/debian bullseye/main amd64 x11proto-xext-dev all 2020.1-1 [3,404 B] Get:26 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libxext-dev amd64 2:1.3.3-1.1 [107 kB] Get:27 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libsdl1.2-dev amd64 1.2.15+dfsg2-6 [730 kB] Get:28 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libsystemd-dev amd64 247.3-6 [401 kB] Get:29 http://dallas.mirrors.linode.com/debian bullseye/main amd64 sphinx-common all 3.4.3-2 [578 kB] Get:30 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-alabaster all 0.7.8-1.1 [18.6 kB] Get:31 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python-babel-localedata all 2.8.0+dfsg.1-7 [4,997 kB] Get:32 http://download.proxmox.com/debian/pve bullseye/pve-no-subscription amd64 libproxmox-backup-qemu0-dev amd64 1.2.0-1 [6,284 B] Get:33 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-tz all 2021.1-1 [34.8 kB] Get:34 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-babel all 2.8.0+dfsg.1-7 [100 kB] Get:35 http://dallas.mirrors.linode.com/debian bullseye/main amd64 sgml-base all 1.30 [15.1 kB] Get:36 http://dallas.mirrors.linode.com/debian bullseye/main amd64 xml-core all 0.18+nmu1 [23.8 kB] Get:37 http://dallas.mirrors.linode.com/debian bullseye/main amd64 docutils-common all 0.16+dfsg-4 [129 kB] Get:38 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-roman all 2.0.0-5 [9,064 B] Get:39 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-docutils all 0.16+dfsg-4 [384 kB] Get:40 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-imagesize all 1.2.0-2 [5,824 B] Get:41 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-pygments all 2.7.1+dfsg-2.1 [657 kB] Get:42 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-snowballstemmer all 2.1.0-1 [58.7 kB] Get:43 http://dallas.mirrors.linode.com/debian bullseye/main amd64 quilt all 0.66-2.1 [319 kB] Get:44 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libtext-unidecode-perl all 1.30-1 [103 kB] Get:45 http://dallas.mirrors.linode.com/debian bullseye/main amd64 texi2html all 1.82+dfsg1-6 [356 kB] Get:46 http://dallas.mirrors.linode.com/debian bullseye/main amd64 tex-common all 6.16 [53.7 kB] Fetched 15.0 MB in 1s (18.4 MB/s) Extracting templates from packages: 100% Selecting previously unselected package libsubunit0:amd64. (Reading database ... 134810 files and directories currently installed.) Preparing to unpack .../00-libsubunit0_1.4.0-3_amd64.deb ... Unpacking libsubunit0:amd64 (1.4.0-3) ... Selecting previously unselected package libsubunit-dev:amd64. Preparing to unpack .../01-libsubunit-dev_1.4.0-3_amd64.deb ... Unpacking libsubunit-dev:amd64 (1.4.0-3) ... Selecting previously unselected package check:amd64. Preparing to unpack .../02-check_0.15.2-2_amd64.deb ... Unpacking check:amd64 (0.15.2-2) ... Selecting previously unselected package libaio-dev:amd64. Preparing to unpack .../03-libaio-dev_0.3.112-9_amd64.deb ... Unpacking libaio-dev:amd64 (0.3.112-9) ... Selecting previously unselected package libcap-ng-dev. Preparing to unpack .../04-libcap-ng-dev_0.7.9-2.2+b1_amd64.deb ... Unpacking libcap-ng-dev (0.7.9-2.2+b1) ... Selecting previously unselected package libfdt-dev. Preparing to unpack .../05-libfdt-dev_1.6.0-1_amd64.deb ... Unpacking libfdt-dev (1.6.0-1) ... Selecting previously unselected package libiscsi-dev:amd64. Preparing to unpack .../06-libiscsi-dev_1.19.0-3_amd64.deb ... Unpacking libiscsi-dev:amd64 (1.19.0-3) ... Selecting previously unselected package libjemalloc-dev. Preparing to unpack .../07-libjemalloc-dev_5.2.1-3_amd64.deb ... Unpacking libjemalloc-dev (5.2.1-3) ... Selecting previously unselected package libnuma-dev:amd64. Preparing to unpack .../08-libnuma-dev_2.0.12-1+b1_amd64.deb ... Unpacking libnuma-dev:amd64 (2.0.12-1+b1) ... Selecting previously unselected package libpci-dev:amd64. Preparing to unpack .../09-libpci-dev_1%3a3.7.0-5_amd64.deb ... Unpacking libpci-dev:amd64 (1:3.7.0-5) ... Selecting previously unselected package libpixman-1-dev:amd64. Preparing to unpack .../10-libpixman-1-dev_0.40.0-1_amd64.deb ... Unpacking libpixman-1-dev:amd64 (0.40.0-1) ... Selecting previously unselected package libproxmox-backup-qemu0-dev. Preparing to unpack .../11-libproxmox-backup-qemu0-dev_1.2.0-1_amd64.deb ... Unpacking libproxmox-backup-qemu0-dev (1.2.0-1) ... Selecting previously unselected package librados-dev. Preparing to unpack .../12-librados-dev_14.2.21-1_amd64.deb ... Unpacking librados-dev (14.2.21-1) ... Selecting previously unselected package librbd-dev. Preparing to unpack .../13-librbd-dev_14.2.21-1_amd64.deb ... Unpacking librbd-dev (14.2.21-1) ... Selecting previously unselected package libslang2-dev:amd64. Preparing to unpack .../14-libslang2-dev_2.3.2-5_amd64.deb ... Unpacking libslang2-dev:amd64 (2.3.2-5) ... Selecting previously unselected package libcaca-dev. Preparing to unpack .../15-libcaca-dev_0.99.beta19-2.2_amd64.deb ... Unpacking libcaca-dev (0.99.beta19-2.2) ... Selecting previously unselected package libglu1-mesa:amd64. Preparing to unpack .../16-libglu1-mesa_9.0.1-1_amd64.deb ... Unpacking libglu1-mesa:amd64 (9.0.1-1) ... Selecting previously unselected package libglu1-mesa-dev:amd64. Preparing to unpack .../17-libglu1-mesa-dev_9.0.1-1_amd64.deb ... Unpacking libglu1-mesa-dev:amd64 (9.0.1-1) ... Selecting previously unselected package libpulse-mainloop-glib0:amd64. Preparing to unpack .../18-libpulse-mainloop-glib0_14.2-2_amd64.deb ... Unpacking libpulse-mainloop-glib0:amd64 (14.2-2) ... Selecting previously unselected package libffi-dev:amd64. Preparing to unpack .../19-libffi-dev_3.3-6_amd64.deb ... Unpacking libffi-dev:amd64 (3.3-6) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../20-libglib2.0-bin_2.66.8-1_amd64.deb ... Unpacking libglib2.0-bin (2.66.8-1) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../21-libglib2.0-dev-bin_2.66.8-1_amd64.deb ... Unpacking libglib2.0-dev-bin (2.66.8-1) ... Selecting previously unselected package uuid-dev:amd64. Preparing to unpack .../22-uuid-dev_2.36.1-8_amd64.deb ... Unpacking uuid-dev:amd64 (2.36.1-8) ... Selecting previously unselected package libblkid-dev:amd64. Preparing to unpack .../23-libblkid-dev_2.36.1-8_amd64.deb ... Unpacking libblkid-dev:amd64 (2.36.1-8) ... Selecting previously unselected package libsepol1-dev:amd64. Preparing to unpack .../24-libsepol1-dev_3.1-1_amd64.deb ... Unpacking libsepol1-dev:amd64 (3.1-1) ... Selecting previously unselected package libpcre2-16-0:amd64. Preparing to unpack .../25-libpcre2-16-0_10.36-2_amd64.deb ... Unpacking libpcre2-16-0:amd64 (10.36-2) ... Selecting previously unselected package libpcre2-32-0:amd64. Preparing to unpack .../26-libpcre2-32-0_10.36-2_amd64.deb ... Unpacking libpcre2-32-0:amd64 (10.36-2) ... Selecting previously unselected package libpcre2-posix2:amd64. Preparing to unpack .../27-libpcre2-posix2_10.36-2_amd64.deb ... Unpacking libpcre2-posix2:amd64 (10.36-2) ... Selecting previously unselected package libpcre2-dev:amd64. Preparing to unpack .../28-libpcre2-dev_10.36-2_amd64.deb ... Unpacking libpcre2-dev:amd64 (10.36-2) ... Selecting previously unselected package libselinux1-dev:amd64. Preparing to unpack .../29-libselinux1-dev_3.1-3_amd64.deb ... Unpacking libselinux1-dev:amd64 (3.1-3) ... Selecting previously unselected package libmount-dev:amd64. Preparing to unpack .../30-libmount-dev_2.36.1-8_amd64.deb ... Unpacking libmount-dev:amd64 (2.36.1-8) ... Selecting previously unselected package libpcre16-3:amd64. Preparing to unpack .../31-libpcre16-3_2%3a8.39-13_amd64.deb ... Unpacking libpcre16-3:amd64 (2:8.39-13) ... Selecting previously unselected package libpcre32-3:amd64. Preparing to unpack .../32-libpcre32-3_2%3a8.39-13_amd64.deb ... Unpacking libpcre32-3:amd64 (2:8.39-13) ... Selecting previously unselected package libpcrecpp0v5:amd64. Preparing to unpack .../33-libpcrecpp0v5_2%3a8.39-13_amd64.deb ... Unpacking libpcrecpp0v5:amd64 (2:8.39-13) ... Selecting previously unselected package libpcre3-dev:amd64. Preparing to unpack .../34-libpcre3-dev_2%3a8.39-13_amd64.deb ... Unpacking libpcre3-dev:amd64 (2:8.39-13) ... Selecting previously unselected package libglib2.0-dev:amd64. Preparing to unpack .../35-libglib2.0-dev_2.66.8-1_amd64.deb ... Unpacking libglib2.0-dev:amd64 (2.66.8-1) ... Selecting previously unselected package libpulse-dev:amd64. Preparing to unpack .../36-libpulse-dev_14.2-2_amd64.deb ... Unpacking libpulse-dev:amd64 (14.2-2) ... Selecting previously unselected package x11proto-xext-dev. Preparing to unpack .../37-x11proto-xext-dev_2020.1-1_all.deb ... Unpacking x11proto-xext-dev (2020.1-1) ... Selecting previously unselected package libxext-dev:amd64. Preparing to unpack .../38-libxext-dev_2%3a1.3.3-1.1_amd64.deb ... Unpacking libxext-dev:amd64 (2:1.3.3-1.1) ... Selecting previously unselected package libsdl1.2-dev. Preparing to unpack .../39-libsdl1.2-dev_1.2.15+dfsg2-6_amd64.deb ... Unpacking libsdl1.2-dev (1.2.15+dfsg2-6) ... Selecting previously unselected package libseccomp-dev:amd64. Preparing to unpack .../40-libseccomp-dev_2.5.1-1_amd64.deb ... Unpacking libseccomp-dev:amd64 (2.5.1-1) ... Selecting previously unselected package libspice-protocol-dev. Preparing to unpack .../41-libspice-protocol-dev_0.14.3-1_all.deb ... Unpacking libspice-protocol-dev (0.14.3-1) ... Selecting previously unselected package libspice-server-dev:amd64. Preparing to unpack .../42-libspice-server-dev_0.14.3-2.1_amd64.deb ... Unpacking libspice-server-dev:amd64 (0.14.3-2.1) ... Selecting previously unselected package libsystemd-dev:amd64. Preparing to unpack .../43-libsystemd-dev_247.3-6_amd64.deb ... Unpacking libsystemd-dev:amd64 (247.3-6) ... Selecting previously unselected package liburing-dev:amd64. Preparing to unpack .../44-liburing-dev_0.7-3_amd64.deb ... Unpacking liburing-dev:amd64 (0.7-3) ... Selecting previously unselected package libusb-1.0-0-dev:amd64. Preparing to unpack .../45-libusb-1.0-0-dev_2%3a1.0.24-3_amd64.deb ... Unpacking libusb-1.0-0-dev:amd64 (2:1.0.24-3) ... Selecting previously unselected package libusbredirparser-dev:amd64. Preparing to unpack .../46-libusbredirparser-dev_0.8.0-1+b1_amd64.deb ... Unpacking libusbredirparser-dev:amd64 (0.8.0-1+b1) ... Selecting previously unselected package meson. Preparing to unpack .../47-meson_0.56.2-1_all.deb ... Unpacking meson (0.56.2-1) ... Selecting previously unselected package libjs-underscore. Preparing to unpack .../48-libjs-underscore_1.9.1~dfsg-3_all.deb ... Unpacking libjs-underscore (1.9.1~dfsg-3) ... Selecting previously unselected package libjs-sphinxdoc. Preparing to unpack .../49-libjs-sphinxdoc_3.4.3-2_all.deb ... Unpacking libjs-sphinxdoc (3.4.3-2) ... Selecting previously unselected package sphinx-common. Preparing to unpack .../50-sphinx-common_3.4.3-2_all.deb ... Unpacking sphinx-common (3.4.3-2) ... Selecting previously unselected package python3-alabaster. Preparing to unpack .../51-python3-alabaster_0.7.8-1.1_all.deb ... Unpacking python3-alabaster (0.7.8-1.1) ... Selecting previously unselected package python-babel-localedata. Preparing to unpack .../52-python-babel-localedata_2.8.0+dfsg.1-7_all.deb ... Unpacking python-babel-localedata (2.8.0+dfsg.1-7) ... Selecting previously unselected package python3-tz. Preparing to unpack .../53-python3-tz_2021.1-1_all.deb ... Unpacking python3-tz (2021.1-1) ... Selecting previously unselected package python3-babel. Preparing to unpack .../54-python3-babel_2.8.0+dfsg.1-7_all.deb ... Unpacking python3-babel (2.8.0+dfsg.1-7) ... Selecting previously unselected package sgml-base. Preparing to unpack .../55-sgml-base_1.30_all.deb ... Unpacking sgml-base (1.30) ... Selecting previously unselected package xml-core. Preparing to unpack .../56-xml-core_0.18+nmu1_all.deb ... Unpacking xml-core (0.18+nmu1) ... Selecting previously unselected package docutils-common. Preparing to unpack .../57-docutils-common_0.16+dfsg-4_all.deb ... Unpacking docutils-common (0.16+dfsg-4) ... Selecting previously unselected package python3-roman. Preparing to unpack .../58-python3-roman_2.0.0-5_all.deb ... Unpacking python3-roman (2.0.0-5) ... Selecting previously unselected package python3-docutils. Preparing to unpack .../59-python3-docutils_0.16+dfsg-4_all.deb ... Unpacking python3-docutils (0.16+dfsg-4) ... Selecting previously unselected package python3-imagesize. Preparing to unpack .../60-python3-imagesize_1.2.0-2_all.deb ... Unpacking python3-imagesize (1.2.0-2) ... Selecting previously unselected package python3-pygments. Preparing to unpack .../61-python3-pygments_2.7.1+dfsg-2.1_all.deb ... Unpacking python3-pygments (2.7.1+dfsg-2.1) ... Selecting previously unselected package python3-snowballstemmer. Preparing to unpack .../62-python3-snowballstemmer_2.1.0-1_all.deb ... Unpacking python3-snowballstemmer (2.1.0-1) ... Selecting previously unselected package python3-sphinx. Preparing to unpack .../63-python3-sphinx_3.4.3-2_all.deb ... Unpacking python3-sphinx (3.4.3-2) ... Selecting previously unselected package quilt. Preparing to unpack .../64-quilt_0.66-2.1_all.deb ... Unpacking quilt (0.66-2.1) ... Selecting previously unselected package libtext-unidecode-perl. Preparing to unpack .../65-libtext-unidecode-perl_1.30-1_all.deb ... Unpacking libtext-unidecode-perl (1.30-1) ... Selecting previously unselected package texi2html. Preparing to unpack .../66-texi2html_1.82+dfsg1-6_all.deb ... Unpacking texi2html (1.82+dfsg1-6) ... Selecting previously unselected package tex-common. Preparing to unpack .../67-tex-common_6.16_all.deb ... Unpacking tex-common (6.16) ... Selecting previously unselected package texinfo. Preparing to unpack .../68-texinfo_6.7.0.dfsg.2-6_amd64.deb ... Unpacking texinfo (6.7.0.dfsg.2-6) ... Selecting previously unselected package xfslibs-dev. Preparing to unpack .../69-xfslibs-dev_5.10.0-4_amd64.deb ... Unpacking xfslibs-dev (5.10.0-4) ... Setting up librados-dev (14.2.21-1) ... Setting up libpcrecpp0v5:amd64 (2:8.39-13) ... Setting up libslang2-dev:amd64 (2.3.2-5) ... Setting up libglib2.0-dev-bin (2.66.8-1) ... Setting up libseccomp-dev:amd64 (2.5.1-1) ... Setting up libpixman-1-dev:amd64 (0.40.0-1) ... Setting up libpcre16-3:amd64 (2:8.39-13) ... Setting up python3-alabaster (0.7.8-1.1) ... Setting up libusbredirparser-dev:amd64 (0.8.0-1+b1) ... Setting up libiscsi-dev:amd64 (1.19.0-3) ... Setting up libsepol1-dev:amd64 (3.1-1) ... Setting up libglib2.0-bin (2.66.8-1) ... Setting up libusb-1.0-0-dev:amd64 (2:1.0.24-3) ... Setting up meson (0.56.2-1) ... Setting up quilt (0.66-2.1) ... Setting up libspice-protocol-dev (0.14.3-1) ... Setting up libaio-dev:amd64 (0.3.112-9) ... Setting up libffi-dev:amd64 (3.3-6) ... Setting up libsubunit0:amd64 (1.4.0-3) ... Setting up libpcre2-16-0:amd64 (10.36-2) ... Setting up libproxmox-backup-qemu0-dev (1.2.0-1) ... Setting up python3-tz (2021.1-1) ... Setting up python-babel-localedata (2.8.0+dfsg.1-7) ... Setting up libnuma-dev:amd64 (2.0.12-1+b1) ... Setting up libfdt-dev (1.6.0-1) ... Setting up tex-common (6.16) ... update-language: texlive-base not installed and configured, doing nothing! Setting up libjemalloc-dev (5.2.1-3) ... Setting up python3-roman (2.0.0-5) ... Setting up python3-pygments (2.7.1+dfsg-2.1) ... Setting up libpcre2-32-0:amd64 (10.36-2) ... Setting up python3-snowballstemmer (2.1.0-1) ... Setting up uuid-dev:amd64 (2.36.1-8) ... Setting up libpulse-mainloop-glib0:amd64 (14.2-2) ... Setting up libpcre32-3:amd64 (2:8.39-13) ... Setting up libpcre2-posix2:amd64 (10.36-2) ... Setting up x11proto-xext-dev (2020.1-1) ... Setting up libcap-ng-dev (0.7.9-2.2+b1) ... Setting up sgml-base (1.30) ... Setting up libglu1-mesa:amd64 (9.0.1-1) ... Setting up libtext-unidecode-perl (1.30-1) ... Setting up libcaca-dev (0.99.beta19-2.2) ... Setting up xfslibs-dev (5.10.0-4) ... Setting up libsystemd-dev:amd64 (247.3-6) ... Setting up liburing-dev:amd64 (0.7-3) ... Setting up libpci-dev:amd64 (1:3.7.0-5) ... Setting up librbd-dev (14.2.21-1) ... Setting up libjs-underscore (1.9.1~dfsg-3) ... Setting up python3-imagesize (1.2.0-2) ... Setting up libspice-server-dev:amd64 (0.14.3-2.1) ... Setting up libblkid-dev:amd64 (2.36.1-8) ... Setting up libpcre2-dev:amd64 (10.36-2) ... Setting up python3-babel (2.8.0+dfsg.1-7) ... update-alternatives: using /usr/bin/pybabel-python3 to provide /usr/bin/pybabel (pybabel) in auto mode Setting up libselinux1-dev:amd64 (3.1-3) ... Setting up libpcre3-dev:amd64 (2:8.39-13) ... Setting up libsubunit-dev:amd64 (1.4.0-3) ... Setting up texi2html (1.82+dfsg1-6) ... Setting up libglu1-mesa-dev:amd64 (9.0.1-1) ... Setting up check:amd64 (0.15.2-2) ... Setting up texinfo (6.7.0.dfsg.2-6) ... Setting up libjs-sphinxdoc (3.4.3-2) ... Setting up libxext-dev:amd64 (2:1.3.3-1.1) ... Setting up xml-core (0.18+nmu1) ... Setting up libmount-dev:amd64 (2.36.1-8) ... Setting up libglib2.0-dev:amd64 (2.66.8-1) ... Setting up sphinx-common (3.4.3-2) ... Processing triggers for shared-mime-info (2.0-1) ... Processing triggers for libglib2.0-0:amd64 (2.66.8-1) ... Processing triggers for libc-bin (2.31-13) ... Processing triggers for man-db (2.9.4-2) ... Setting up libpulse-dev:amd64 (14.2-2) ... Setting up libsdl1.2-dev (1.2.15+dfsg2-6) ... Processing triggers for sgml-base (1.30) ... Setting up docutils-common (0.16+dfsg-4) ... Processing triggers for sgml-base (1.30) ... Setting up python3-docutils (0.16+dfsg-4) ... update-alternatives: using /usr/share/docutils/scripts/python3/rst-buildhtml to provide /usr/bin/rst-buildhtml (rst-buildhtml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html to provide /usr/bin/rst2html (rst2html) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html4 to provide /usr/bin/rst2html4 (rst2html4) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html5 to provide /usr/bin/rst2html5 (rst2html5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2latex to provide /usr/bin/rst2latex (rst2latex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2man to provide /usr/bin/rst2man (rst2man) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt to provide /usr/bin/rst2odt (rst2odt) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt_prepstyles to provide /usr/bin/rst2odt_prepstyles (rst2odt_prepstyles) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2pseudoxml to provide /usr/bin/rst2pseudoxml (rst2pseudoxml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2s5 to provide /usr/bin/rst2s5 (rst2s5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xetex to provide /usr/bin/rst2xetex (rst2xetex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xml to provide /usr/bin/rst2xml (rst2xml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rstpep2html to provide /usr/bin/rstpep2html (rstpep2html) in auto mode Setting up python3-sphinx (3.4.3-2) ... Setting up pve-qemu-kvm-build-deps (6.0.0-3) ... lae at lilienne:~/build/pve-qemu$ make dinstall test -f "qemu/configure" || git submodule update --init --recursive Submodule 'qemu' (git://git.proxmox.com/git/mirror_qemu) registered for path 'qemu' Cloning into '/home/lae/build/pve-qemu/qemu'... Submodule path 'qemu': checked out '609d7596524ab204ccd71ef42c9eee4c7c338ea4' Submodule 'capstone' (https://gitlab.com/qemu-project/capstone.git) registered for path 'qemu/capstone' Submodule 'dtc' (https://gitlab.com/qemu-project/dtc.git) registered for path 'qemu/dtc' Submodule 'meson' (https://gitlab.com/qemu-project/meson.git) registered for path 'qemu/meson' Submodule 'roms/QemuMacDrivers' (https://gitlab.com/qemu-project/QemuMacDrivers.git) registered for path 'qemu/roms/QemuMacDrivers' Submodule 'roms/SLOF' (https://gitlab.com/qemu-project/SLOF.git) registered for path 'qemu/roms/SLOF' Submodule 'roms/edk2' (https://gitlab.com/qemu-project/edk2.git) registered for path 'qemu/roms/edk2' Submodule 'roms/ipxe' (https://gitlab.com/qemu-project/ipxe.git) registered for path 'qemu/roms/ipxe' Submodule 'roms/openbios' (https://gitlab.com/qemu-project/openbios.git) registered for path 'qemu/roms/openbios' Submodule 'roms/opensbi' (https://gitlab.com/qemu-project/opensbi.git) registered for path 'qemu/roms/opensbi' Submodule 'roms/qboot' (https://gitlab.com/qemu-project/qboot.git) registered for path 'qemu/roms/qboot' Submodule 'roms/qemu-palcode' (https://gitlab.com/qemu-project/qemu-palcode.git) registered for path 'qemu/roms/qemu-palcode' Submodule 'roms/seabios' (https://gitlab.com/qemu-project/seabios.git/) registered for path 'qemu/roms/seabios' Submodule 'roms/seabios-hppa' (https://gitlab.com/qemu-project/seabios-hppa.git) registered for path 'qemu/roms/seabios-hppa' Submodule 'roms/sgabios' (https://gitlab.com/qemu-project/sgabios.git) registered for path 'qemu/roms/sgabios' Submodule 'roms/skiboot' (https://gitlab.com/qemu-project/skiboot.git) registered for path 'qemu/roms/skiboot' Submodule 'roms/u-boot' (https://gitlab.com/qemu-project/u-boot.git) registered for path 'qemu/roms/u-boot' Submodule 'roms/u-boot-sam460ex' (https://gitlab.com/qemu-project/u-boot-sam460ex.git) registered for path 'qemu/roms/u-boot-sam460ex' Submodule 'roms/vbootrom' (https://gitlab.com/qemu-project/vbootrom.git) registered for path 'qemu/roms/vbootrom' Submodule 'slirp' (https://gitlab.com/qemu-project/libslirp.git) registered for path 'qemu/slirp' Submodule 'tests/fp/berkeley-softfloat-3' (https://gitlab.com/qemu-project/berkeley-softfloat-3.git) registered for path 'qemu/tests/fp/berkeley-softfloat-3' Submodule 'tests/fp/berkeley-testfloat-3' (https://gitlab.com/qemu-project/berkeley-testfloat-3.git) registered for path 'qemu/tests/fp/berkeley-testfloat-3' Submodule 'ui/keycodemapdb' (https://gitlab.com/qemu-project/keycodemapdb.git) registered for path 'qemu/ui/keycodemapdb' Cloning into '/home/lae/build/pve-qemu/qemu/capstone'... Cloning into '/home/lae/build/pve-qemu/qemu/dtc'... Cloning into '/home/lae/build/pve-qemu/qemu/meson'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/QemuMacDrivers'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/SLOF'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/ipxe'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/openbios'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/opensbi'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/qboot'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/qemu-palcode'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/seabios'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/seabios-hppa'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/sgabios'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/skiboot'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/u-boot'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/u-boot-sam460ex'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/vbootrom'... Cloning into '/home/lae/build/pve-qemu/qemu/slirp'... Cloning into '/home/lae/build/pve-qemu/qemu/tests/fp/berkeley-softfloat-3'... Cloning into '/home/lae/build/pve-qemu/qemu/tests/fp/berkeley-testfloat-3'... Cloning into '/home/lae/build/pve-qemu/qemu/ui/keycodemapdb'... Submodule path 'qemu/capstone': checked out 'f8b1b833015a4ae47110ed068e0deb7106ced66d' Submodule path 'qemu/dtc': checked out '85e5d839847af54efab170f2b1331b2a6421e647' Submodule path 'qemu/meson': checked out '776acd2a805c9b42b4f0375150977df42130317f' Submodule path 'qemu/roms/QemuMacDrivers': checked out '90c488d5f4a407342247b9ea869df1c2d9c8e266' Submodule path 'qemu/roms/SLOF': checked out '33a7322de13e9dca4b38851a345a58d37e7a441d' Submodule path 'qemu/roms/edk2': checked out '06dc822d045c2bb42e497487935485302486e151' Submodule 'SoftFloat' (https://github.com/ucb-bar/berkeley-softfloat-3.git) registered for path 'qemu/roms/edk2/ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3' Submodule 'BaseTools/Source/C/BrotliCompress/brotli' (https://github.com/google/brotli) registered for path 'qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli' Submodule 'CryptoPkg/Library/OpensslLib/openssl' (https://github.com/openssl/openssl) registered for path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl' Submodule 'MdeModulePkg/Library/BrotliCustomDecompressLib/brotli' (https://github.com/google/brotli) registered for path 'qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli' Submodule 'MdeModulePkg/Universal/RegularExpressionDxe/oniguruma' (https://github.com/kkos/oniguruma) registered for path 'qemu/roms/edk2/MdeModulePkg/Universal/RegularExpressionDxe/oniguruma' Submodule 'UnitTestFrameworkPkg/Library/CmockaLib/cmocka' (https://git.cryptomilk.org/projects/cmocka.git) registered for path 'qemu/roms/edk2/UnitTestFrameworkPkg/Library/CmockaLib/cmocka' Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/MdeModulePkg/Universal/RegularExpressionDxe/oniguruma'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/UnitTestFrameworkPkg/Library/CmockaLib/cmocka'... Submodule path 'qemu/roms/edk2/ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3': checked out 'b64af41c3276f97f0e181920400ee056b9c88037' Submodule path 'qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli': checked out '666c3280cc11dc433c303d79a83d4ffbdd12cc8d' Submodule 'research/esaxx' (https://github.com/hillbig/esaxx) registered for path 'qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli/research/esaxx' Submodule 'research/libdivsufsort' (https://github.com/y-256/libdivsufsort.git) registered for path 'qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli/research/libdivsufsort' Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli/research/esaxx'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli/research/libdivsufsort'... Submodule path 'qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli/research/esaxx': checked out 'ca7cb332011ec37a8436487f210f396b84bd8273' Submodule path 'qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli/research/libdivsufsort': checked out '5f60d6f026c30fb4ac296f696b3c8b0eb71bd428' Submodule path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl': checked out 'e2e09d9fba1187f8d6aafaa34d4172f56f1ffb72' Submodule 'boringssl' (https://boringssl.googlesource.com/boringssl) registered for path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/boringssl' Submodule 'krb5' (https://github.com/krb5/krb5) registered for path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/krb5' Submodule 'pyca.cryptography' (https://github.com/pyca/cryptography.git) registered for path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/pyca-cryptography' Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/boringssl'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/krb5'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/pyca-cryptography'... Submodule path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/boringssl': checked out '2070f8ad9151dc8f3a73bffaa146b5e6937a583f' Submodule path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/krb5': checked out '890ca2f401924cdcb88f493950b04700bbe52db3' Submodule path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/pyca-cryptography': checked out '09403100de2f6f1cdd0d484dcb8e620f1c335c8f' Submodule path 'qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli': checked out '666c3280cc11dc433c303d79a83d4ffbdd12cc8d' Submodule 'research/esaxx' (https://github.com/hillbig/esaxx) registered for path 'qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/esaxx' Submodule 'research/libdivsufsort' (https://github.com/y-256/libdivsufsort.git) registered for path 'qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/libdivsufsort' Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/esaxx'... Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/libdivsufsort'... Submodule path 'qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/esaxx': checked out 'ca7cb332011ec37a8436487f210f396b84bd8273' Submodule path 'qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/libdivsufsort': checked out '5f60d6f026c30fb4ac296f696b3c8b0eb71bd428' Submodule path 'qemu/roms/edk2/MdeModulePkg/Universal/RegularExpressionDxe/oniguruma': checked out 'abfc8ff81df4067f309032467785e06975678f0d' Submodule path 'qemu/roms/edk2/UnitTestFrameworkPkg/Library/CmockaLib/cmocka': checked out '1cc9cde3448cdd2e000886a26acf1caac2db7cf1' Submodule path 'qemu/roms/ipxe': checked out '4bd064de239dab2426b31c9789a1f4d78087dc63' Submodule path 'qemu/roms/openbios': checked out '4a0041107b8ef77e0e8337bfcb5f8078887261a7' Submodule path 'qemu/roms/opensbi': checked out '234ed8e427f4d92903123199f6590d144e0d9351' Submodule path 'qemu/roms/qboot': checked out 'a5300c4949b8d4de2d34bedfaed66793f48ec948' Submodule path 'qemu/roms/qemu-palcode': checked out 'bf0e13698872450164fa7040da36a95d2d4b326f' Submodule path 'qemu/roms/seabios': checked out '155821a1990b6de78dde5f98fa5ab90e802021e0' Submodule path 'qemu/roms/seabios-hppa': checked out '73b740f77190643b2ada5ee97a9a108c6ef2a37b' Submodule path 'qemu/roms/sgabios': checked out 'cbaee52287e5f32373181cff50a00b6c4ac9015a' Submodule path 'qemu/roms/skiboot': checked out '3a6fdede6ce117facec0108afe716cf5d0472c3f' Submodule path 'qemu/roms/u-boot': checked out 'd3689267f92c5956e09cc7d1baa4700141662bff' Submodule path 'qemu/roms/u-boot-sam460ex': checked out '60b3916f33e617a815973c5a6df77055b2e3a588' Submodule path 'qemu/roms/vbootrom': checked out '0c37a43527f0ee2b9584e7fb2fdc805e902635ac' Submodule path 'qemu/slirp': checked out '8f43a99191afb47ca3f3c6972f6306209f367ece' Submodule path 'qemu/tests/fp/berkeley-softfloat-3': checked out 'b64af41c3276f97f0e181920400ee056b9c88037' Submodule path 'qemu/tests/fp/berkeley-testfloat-3': checked out '5a59dcec19327396a011a17fd924aed4fec416b3' Submodule path 'qemu/ui/keycodemapdb': checked out '6119e6e19a050df847418de7babe5166779955e4' # check if qemu/ was used for a build # if so, please run 'make distclean' in the submodule and try again test ! -f qemu/build/config.status rm -rf pve-qemu-kvm-6.0.0 cp -a qemu pve-qemu-kvm-6.0.0 cp -a debian pve-qemu-kvm-6.0.0/debian rm -rf pve-qemu-kvm-6.0.0/ui/keycodemapdb cp -a keycodemapdb pve-qemu-kvm-6.0.0/ui/ echo "git clone git://git.proxmox.com/git/pve-qemu.git\\ngit checkout 277d33454f77ec1d1e0bc04e37621e4dd2424b67" > pve-qemu-kvm-6.0.0/debian/SOURCE cd pve-qemu-kvm-6.0.0; dpkg-buildpackage -b -us -uc -j dpkg-buildpackage: info: source package pve-qemu-kvm dpkg-buildpackage: info: source version 6.0.0-3 dpkg-buildpackage: info: source distribution bullseye dpkg-buildpackage: info: source changed by Proxmox Support Team dpkg-buildpackage: info: host architecture amd64 dpkg-source --before-build . dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying extra/0001-monitor-qmp-fix-race-on-CHR_EVENT_CLOSED-without-OOB.patch dpkg-source: info: applying extra/0002-block-io_uring-resubmit-when-result-is-EAGAIN.patch dpkg-source: info: applying bitmap-mirror/0001-drive-mirror-add-support-for-sync-bitmap-mode-never.patch dpkg-source: info: applying bitmap-mirror/0002-drive-mirror-add-support-for-conditional-and-always-.patch dpkg-source: info: applying bitmap-mirror/0003-mirror-add-check-for-bitmap-mode-without-bitmap.patch dpkg-source: info: applying bitmap-mirror/0004-mirror-switch-to-bdrv_dirty_bitmap_merge_internal.patch dpkg-source: info: applying bitmap-mirror/0005-iotests-add-test-for-bitmap-mirror.patch dpkg-source: info: applying bitmap-mirror/0006-mirror-move-some-checks-to-qmp.patch dpkg-source: info: applying pve/0001-PVE-Config-block-file-change-locking-default-to-off.patch dpkg-source: info: applying pve/0002-PVE-Config-Adjust-network-script-path-to-etc-kvm.patch dpkg-source: info: applying pve/0003-PVE-Config-set-the-CPU-model-to-kvm64-32-instead-of-.patch dpkg-source: info: applying pve/0004-PVE-Config-ui-spice-default-to-pve-certificates.patch dpkg-source: info: applying pve/0005-PVE-Config-glusterfs-no-default-logfile-if-daemonize.patch dpkg-source: info: applying pve/0006-PVE-Config-rbd-block-rbd-disable-rbd_cache_writethro.patch dpkg-source: info: applying pve/0007-PVE-Up-qmp-add-get_link_status.patch dpkg-source: info: applying pve/0008-PVE-Up-glusterfs-allow-partial-reads.patch dpkg-source: info: applying pve/0009-PVE-Up-qemu-img-return-success-on-info-without-snaps.patch dpkg-source: info: applying pve/0010-PVE-Up-qemu-img-dd-add-osize-and-read-from-to-stdin-.patch dpkg-source: info: applying pve/0011-PVE-Up-qemu-img-dd-add-isize-parameter.patch dpkg-source: info: applying pve/0012-PVE-Up-qemu-img-dd-add-n-skip_create.patch dpkg-source: info: applying pve/0013-PVE-virtio-balloon-improve-query-balloon.patch dpkg-source: info: applying pve/0014-PVE-qapi-modify-query-machines.patch dpkg-source: info: applying pve/0015-PVE-qapi-modify-spice-query.patch dpkg-source: info: applying pve/0016-PVE-add-savevm-async-for-background-state-snapshots.patch dpkg-source: info: applying pve/0017-PVE-add-optional-buffer-size-to-QEMUFile.patch dpkg-source: info: applying pve/0018-PVE-block-add-the-zeroinit-block-driver-filter.patch dpkg-source: info: applying pve/0019-PVE-Add-dummy-id-command-line-parameter.patch dpkg-source: info: applying pve/0020-PVE-Config-Revert-target-i386-disable-LINT0-after-re.patch dpkg-source: info: applying pve/0021-PVE-Up-Config-file-posix-make-locking-optiono-on-cre.patch dpkg-source: info: applying pve/0022-PVE-monitor-disable-oob-capability.patch dpkg-source: info: applying pve/0023-PVE-Compat-4.0-used-balloon-qemu-4-0-config-size-fal.patch dpkg-source: info: applying pve/0024-PVE-Allow-version-code-in-machine-type.patch dpkg-source: info: applying pve/0025-PVE-Backup-add-vma-backup-format-code.patch dpkg-source: info: applying pve/0026-PVE-Backup-add-backup-dump-block-driver.patch dpkg-source: info: applying pve/0027-PVE-Backup-proxmox-backup-patches-for-qemu.patch dpkg-source: info: applying pve/0028-PVE-Backup-pbs-restore-new-command-to-restore-from-p.patch dpkg-source: info: applying pve/0029-PVE-Backup-Add-dirty-bitmap-tracking-for-incremental.patch dpkg-source: info: applying pve/0030-PVE-various-PBS-fixes.patch dpkg-source: info: applying pve/0031-PVE-Add-PBS-block-driver-to-map-backup-archives-into.patch dpkg-source: info: applying pve/0032-PVE-add-query_proxmox_support-QMP-command.patch dpkg-source: info: applying pve/0033-PVE-add-query-pbs-bitmap-info-QMP-call.patch dpkg-source: info: applying pve/0034-PVE-redirect-stderr-to-journal-when-daemonized.patch dpkg-source: info: applying pve/0035-PVE-Add-sequential-job-transaction-support.patch dpkg-source: info: applying pve/0036-PVE-Backup-Use-a-transaction-to-synchronize-job-stat.patch dpkg-source: info: applying pve/0037-PVE-Backup-Don-t-block-on-finishing-and-cleanup-crea.patch dpkg-source: info: applying pve/0038-PVE-Migrate-dirty-bitmap-state-via-savevm.patch dpkg-source: info: applying pve/0039-migration-block-dirty-bitmap-migrate-other-bitmaps-e.patch dpkg-source: info: applying pve/0040-PVE-fall-back-to-open-iscsi-initiatorname.patch dpkg-source: info: applying pve/0041-PVE-Use-coroutine-QMP-for-backup-cancel_backup.patch dpkg-source: info: applying pve/0042-PBS-add-master-key-support.patch dpkg-source: info: applying pve/0043-PVE-block-pbs-fast-path-reads-without-allocation-if-.patch dpkg-source: info: applying pve/0044-PVE-block-stream-increase-chunk-size.patch dpkg-source: info: applying pve/0045-block-io-accept-NULL-qiov-in-bdrv_pad_request.patch dpkg-source: info: applying pve/0046-block-add-alloc-track-driver.patch dpkg-source: info: applying pve/0047-PVE-whitelist-invalid-QAPI-names-for-backwards-compa.patch dpkg-source: info: applying pve/0048-PVE-savevm-async-register-yank-before-migration_inco.patch fakeroot debian/rules clean make[1]: Entering directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' dh_testdir dh_testroot rm -f build-stamp # Add here commands to clean up after the build process. /usr/bin/make distclean make[2]: Entering directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h find . \( -name '*.so' -o -name '*.dll' -o -name '*.[oda]' \) -type f \ ! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-aarch64.a \ ! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-arm.a \ -exec rm {} + rm -f TAGS cscope.* *.pod *~ */*~ rm -f fsdev/*.pod scsi/*.pod rm -f config-host.mak config-host.h* rm -f tests/tcg/config-*.mak rm -f config-all-disas.mak config.status rm -f roms/seabios/config.mak roms/vgabios/config.mak rm -f qemu-plugins-ld.symbols qemu-plugins-ld64.symbols rm -f *-config-target.h *-config-devices.mak *-config-devices.h rm -rf meson-private meson-logs meson-info compile_commands.json rm -f Makefile.ninja Makefile.mtest build.ninja.stamp meson.stamp rm -f config.log rm -f linux-headers/asm rm -Rf .sdk make[2]: Leaving directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' cp -f /usr/share/misc/config.sub config.sub cp -f /usr/share/misc/config.guess config.guess dh_clean make[1]: Leaving directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' debian/rules build make[1]: Entering directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' dh_testdir # Add here commands to configure the package. # guest-agent is only required for guest systems ./configure \ --with-git-submodules=ignore \ --docdir=/usr/share/doc/pve-qemu-kvm \ --localstatedir=/var \ --prefix=/usr \ --sysconfdir=/etc \ --target-list=x86_64-softmmu,aarch64-softmmu \ --with-suffix="kvm" \ --with-pkgversion="pve-qemu-kvm_6.0.0" \ --audio-drv-list="alsa,pa" \ --datadir=/usr/share \ --libexecdir=/usr/lib/kvm \ --disable-capstone \ --disable-gtk \ --disable-guest-agent \ --disable-guest-agent-msi \ --disable-libnfs \ --disable-libxml2 \ --disable-sdl \ --disable-smartcard \ --disable-strip \ --disable-xen \ --enable-curl \ --enable-docs \ --enable-glusterfs \ --enable-gnutls \ --enable-libiscsi \ --enable-libusb \ --enable-linux-aio \ --enable-linux-io-uring \ --enable-numa \ --enable-rbd \ --enable-seccomp \ --enable-spice \ --enable-usb-redir \ --enable-virtfs \ --enable-virtiofsd \ --enable-xfsctl Using './build' as the directory for build output The Meson build system Version: 0.56.2 Source dir: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0 Build dir: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/build Build type: native build Project name: qemu Project version: 6.0.0 C compiler for the host machine: cc (gcc 10.2.1 "cc (Debian 10.2.1-6) 10.2.1 20210110") C linker for the host machine: cc ld.bfd 2.35.2 Host machine cpu family: x86_64 Host machine cpu: x86_64 Program sh found: YES (/usr/bin/sh) Program python3 found: YES (/usr/bin/python3) Program bzip2 found: YES (/usr/bin/bzip2) C++ compiler for the host machine: c++ (gcc 10.2.1 "c++ (Debian 10.2.1-6) 10.2.1 20210110") C++ linker for the host machine: c++ ld.bfd 2.35.2 Program cgcc found: NO Library m found: YES Library util found: YES Run-time dependency appleframeworks found: NO (tried framework) Found pkg-config: /usr/bin/pkg-config (0.29.2) Run-time dependency pixman-1 found: YES 0.40.0 Library aio found: YES Run-time dependency zlib found: YES 1.2.11 Dependency libnfs skipped: feature libnfs disabled Run-time dependency appleframeworks found: NO (tried framework) Run-time dependency libseccomp found: YES 2.5.1 Has header "cap-ng.h" : YES Library cap-ng found: YES Run-time dependency xkbcommon found: NO (tried pkgconfig) Library rt found: YES Run-time dependency libiscsi found: YES 1.19.0 Run-time dependency libzstd found: NO (tried pkgconfig) Run-time dependency libcurl found: YES 7.74.0 Run-time dependency libudev found: YES 247 Library mpathpersist found: NO Run-time dependency ncursesw found: YES 6.2.20201114 Has header "brlapi.h" : YES Library brlapi found: YES Dependency sdl2 skipped: feature sdl disabled Library rados found: YES Has header "rbd/librbd.h" : YES Library rbd found: YES Run-time dependency glusterfs-api found: YES 7.9.2 Has header "bzlib.h" : NO Has header "lzfse.h" : NO Dependency gtk+-3.0 skipped: feature gtk disabled Run-time dependency libpng found: YES 1.6.37 Run-time dependency libjpeg found: YES 2.0.6 Has header "sasl/sasl.h" : YES Library sasl2 found: YES Has header "snappy-c.h" : NO Has header "lzo/lzo1x.h" : NO Run-time dependency u2f-emu found: NO (tried pkgconfig) Run-time dependency libkeyutils found: NO (tried pkgconfig) Checking for function "gettid" : YES Library uuid found: YES Library systemd found: YES Library proxmox_backup_qemu found: YES Run-time dependency fuse3 found: NO (tried pkgconfig) Has header "linux/btrfs.h" : YES Has header "libdrm/drm.h" : YES Has header "pty.h" : YES Has header "sys/ioccom.h" : NO Has header "sys/kcov.h" : NO Checking for function "system" : YES Checking for function "preadv" : YES Program scripts/minikconf.py found: YES (/usr/bin/python3 /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/minikconf.py) Configuring x86_64-softmmu-config-target.h using configuration Configuring x86_64-softmmu-config-devices.mak with command Reading depfile: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/build/meson-private/x86_64-softmmu-config-devices.mak.d Configuring x86_64-softmmu-config-devices.h using configuration Configuring aarch64-softmmu-config-target.h using configuration Configuring aarch64-softmmu-config-devices.mak with command Reading depfile: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/build/meson-private/aarch64-softmmu-config-devices.mak.d Configuring aarch64-softmmu-config-devices.h using configuration Run-time dependency slirp found: YES 4.4.0 Library fdt found: YES Configuring config-host.h using configuration Program scripts/hxtool found: YES (/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/hxtool) Program scripts/shaderinclude.pl found: YES (/usr/bin/env perl /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/shaderinclude.pl) Program scripts/qapi-gen.py found: YES (/usr/bin/python3 /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/qapi-gen.py) Program scripts/qemu-version.sh found: YES (/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/qemu-version.sh) |Executing subproject libvhost-user method meson | |Project name: libvhost-user |Project version: undefined |C compiler for the host machine: cc (gcc 10.2.1 "cc (Debian 10.2.1-6) 10.2.1 20210110") |C linker for the host machine: cc ld.bfd 2.35.2 |Run-time dependency threads found: YES |Dependency glib-2.0 found: YES 6.0.0 (overridden) |Build targets in project: 8 |Subproject libvhost-user finished. Dependency threads found: YES unknown (cached) Program keycodemapdb/tools/keymap-gen found: YES (/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/ui/keycodemapdb/tools/keymap-gen) Program scripts/decodetree.py found: YES (/usr/bin/python3 /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/decodetree.py) Program ../scripts/modules/module_block.py found: YES (/usr/bin/python3 /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/block/../scripts/modules/module_block.py) Program ../scripts/block-coroutine-wrapper.py found: YES (/usr/bin/python3 /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/block/../scripts/block-coroutine-wrapper.py) Program nm found: YES Program scripts/undefsym.py found: YES (/usr/bin/python3 /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/undefsym.py) Program scripts/feature_to_c.sh found: YES (/bin/sh /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/feature_to_c.sh) Library ibumad found: YES Configuring 50-qemu-gpu.json using configuration Configuring 50-qemu-virtiofsd.json using configuration Configuring 50-edk2-i386-secure.json using configuration Configuring 50-edk2-x86_64-secure.json using configuration Configuring 60-edk2-aarch64.json using configuration Configuring 60-edk2-arm.json using configuration Configuring 60-edk2-i386.json using configuration Configuring 60-edk2-x86_64.json using configuration Program qemu-keymap found: NO Program sphinx-build found: YES (/usr/bin/sphinx-build) Program python3 found: YES (/usr/bin/python3) Program diff found: YES (/usr/bin/diff) Program dbus-daemon found: YES (/usr/bin/dbus-daemon) Program initrd-stress.sh found: YES (/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/tests/migration/initrd-stress.sh) Build targets in project: 465 qemu 6.0.0 Directories Install prefix: /usr BIOS directory: share/kvm firmware path: /usr/share/qemu-firmware binary directory: bin library directory: lib module directory: lib/kvm libexec directory: lib/kvm include directory: include config directory: /etc local state directory: /var Manual directory: share/man Doc directory: /usr/share/doc/pve-qemu-kvm Build directory: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/build Source path: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0 GIT submodules: ui/keycodemapdb tests/fp/berkeley-testfloat-3 tests/fp/berkeley-softfloat-3 Host binaries git: git make: make python: /usr/bin/python3 (version: 3.9) sphinx-build: YES genisoimage: /usr/bin/genisoimage smbd: "/usr/sbin/smbd" Configurable features Documentation: YES system-mode emulation: YES user-mode emulation: NO block layer: YES Install blobs: YES module support: NO plugin support: NO fuzzing support: NO Audio drivers: alsa pa Trace backends: log QOM debugging: YES vhost-kernel support: YES vhost-net support: YES vhost-crypto support: YES vhost-scsi support: YES vhost-vsock support: YES vhost-user support: YES vhost-user-blk server support: YES vhost-user-fs support: YES vhost-vdpa support: YES build guest agent: NO Compilation host CPU: x86_64 host endianness: little C compiler: cc Host C compiler: cc C++ compiler: c++ ARFLAGS: rv CFLAGS: -O2 -g CXXFLAGS: -O2 -g QEMU_CFLAGS: -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-declaration -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wimplicit-fallthrough=2 -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-psabi -fstack-protector-strong QEMU_LDFLAGS: -Wl,--warn-common -Wl,-z,relro -Wl,-z,now -m64 -fstack-protector-strong profiler: NO link-time optimization (LTO): NO PIE: YES static build: NO malloc trim support: YES membarrier: NO preadv support: YES fdatasync: YES madvise: YES posix_madvise: YES posix_memalign: YES debug stack usage: NO mutex debugging: NO memory allocator: system avx2 optimization: YES avx512f optimization: NO gprof enabled: NO gcov: NO thread sanitizer: NO CFI support: NO strip binaries: NO sparse: NO mingw32 support: NO x86_64 tests: cc Targets and accelerators KVM support: YES HAX support: NO HVF support: NO WHPX support: NO Xen support: NO TCG support: YES TCG backend: native (x86_64) TCG debug enabled: NO target list: x86_64-softmmu aarch64-softmmu default devices: YES out of process emulation: YES Block layer support coroutine backend: ucontext coroutine pool: YES Block whitelist (rw): Block whitelist (ro): VirtFS support: YES build virtiofs daemon: YES Live block migration: YES replication support: YES bochs support: YES cloop support: YES dmg support: YES qcow v1 support: YES vdi support: YES vvfat support: YES qed support: YES parallels support: YES sheepdog support: NO FUSE exports: NO Crypto TLS priority: "NORMAL" GNUTLS support: YES libgcrypt: NO nettle: YES XTS: YES crypto afalg: NO rng-none: NO Linux keyring: YES Dependencies SDL support: NO SDL image support: NO GTK support: NO pixman: YES VTE support: NO slirp support: system libtasn1: YES PAM: NO iconv support: YES curses support: YES virgl support: YES curl support: YES Multipath support: NO VNC support: YES VNC SASL support: YES VNC JPEG support: YES VNC PNG support: YES brlapi support: YES vde support: YES netmap support: NO Linux AIO support: YES Linux io_uring support: YES ATTR/XATTR support: YES RDMA support: YES PVRDMA support: YES fdt support: system libcap-ng support: YES spice support: YES rbd support: YES xfsctl support: YES smartcard support: NO U2F support: NO libusb: YES usb net redir: YES OpenGL support: YES GBM: YES libiscsi support: YES libnfs support: NO seccomp support: YES GlusterFS support: YES TPM support: YES libssh support: YES lzo support: NO snappy support: NO bzip2 support: NO lzfse support: NO zstd support: NO NUMA host support: YES libxml2: NO PBS bdrv support: YES capstone: NO libpmem support: YES libdaxctl support: NO libudev: YES FUSE lseek: NO Subprojects libvhost-user: YES Found ninja-1.10.1 at /usr/bin/ninja dh_testdir # Add here commands to compile the package. /usr/bin/make make[2]: Entering directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' changing dir to build for /usr/bin/make ""... make[3]: Entering directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/build' GIT ui/keycodemapdb tests/fp/berkeley-testfloat-3 tests/fp/berkeley-softfloat-3 /usr/bin/ninja build.ninja && touch build.ninja.stamp ninja: no work to do. /usr/bin/meson introspect --targets --tests --benchmarks | /usr/bin/python3 -B scripts/mtest2make.py > Makefile.mtest GIT ui/keycodemapdb tests/fp/berkeley-testfloat-3 tests/fp/berkeley-softfloat-3 AS multiboot.o AS linuxboot.o CC linuxboot_dma.o AS kvmvapic.o AS pvh.o CC pvh_main.o BUILD multiboot.img BUILD linuxboot.img BUILD kvmvapic.img BUILD multiboot.raw BUILD linuxboot.raw BUILD kvmvapic.raw SIGN multiboot.bin BUILD linuxboot_dma.img SIGN linuxboot.bin SIGN kvmvapic.bin BUILD linuxboot_dma.raw SIGN linuxboot_dma.bin BUILD pvh.img BUILD pvh.raw SIGN pvh.bin [1/2951] Generating trace-hw_alpha.h with a custom command [2/2951] Generating trace-hw_adc.h with a custom command [3/2951] Generating trace-crypto.c with a custom command [4/2951] Generating trace-qapi.c with a custom command [5/2951] Generating trace-qom.c with a custom command [6/2951] Generating trace-backends_tpm.c with a custom command [7/2951] Generating trace-chardev.c with a custom command [8/2951] Generating trace-hw_9pfs.c with a custom command [9/2951] Generating trace-hw_adc.c with a custom command [10/2951] Generating trace-chardev.h with a custom command [11/2951] Generating trace-crypto.h with a custom command [12/2951] Generating trace-qom.h with a custom command [13/2951] Compiling C object subprojects/libvhost-user/link-test.p/link-test.c.o [14/2951] Generating trace-hw_ide.c with a custom command [15/2951] Generating trace-hw_acpi.c with a custom command [16/2951] Generating trace-qapi.h with a custom command [17/2951] Generating trace-hw_s390x.c with a custom command [18/2951] Generating trace-hw_acpi.h with a custom command [19/2951] Generating trace-root.c with a custom command [20/2951] Generating trace-root.h with a custom command [21/2951] Generating trace-hw_9pfs.h with a custom command [22/2951] Generating trace-monitor.c with a custom command [23/2951] Generating trace-monitor.h with a custom command [24/2951] Generating trace-hw_scsi.c with a custom command [25/2951] Generating trace-authz.c with a custom command [26/2951] Generating trace-authz.h with a custom command [27/2951] Generating trace-util.h with a custom command [28/2951] Generating trace-util.c with a custom command [29/2951] Generating trace-scsi.h with a custom command [30/2951] Generating trace-scsi.c with a custom command [31/2951] Generating trace-io.c with a custom command [32/2951] Generating trace-accel_kvm.c with a custom command [33/2951] Generating trace-nbd.c with a custom command [34/2951] Generating trace-backends.h with a custom command [35/2951] Generating trace-accel_kvm.h with a custom command [36/2951] Generating trace-audio.h with a custom command [37/2951] Generating trace-audio.c with a custom command [38/2951] Generating trace-hw_alpha.c with a custom command [39/2951] Generating trace-block.c with a custom command [40/2951] Generating trace-io.h with a custom command [41/2951] Generating trace-backends_tpm.h with a custom command [42/2951] Generating trace-hw_arm.c with a custom command [43/2951] Generating trace-hw_scsi.h with a custom command [44/2951] Generating trace-block.h with a custom command [45/2951] Generating trace-nbd.h with a custom command [46/2951] Generating trace-backends.c with a custom command [47/2951] Generating trace-hw_audio.h with a custom command [48/2951] Generating trace-hw_audio.c with a custom command [49/2951] Generating trace-hw_block_dataplane.h with a custom command [50/2951] Generating trace-hw_block_dataplane.c with a custom command [51/2951] Generating trace-hw_char.c with a custom command [52/2951] Generating trace-hw_dma.c with a custom command [53/2951] Generating trace-hw_hppa.h with a custom command [54/2951] Generating trace-hw_arm.h with a custom command [55/2951] Generating trace-hw_dma.h with a custom command [56/2951] Generating trace-hw_hppa.c with a custom command [57/2951] Generating trace-hw_hyperv.c with a custom command [58/2951] Generating trace-hw_i2c.c with a custom command [59/2951] Generating trace-hw_block.c with a custom command [60/2951] Generating trace-hw_hyperv.h with a custom command [61/2951] Compiling C object subprojects/libvhost-user/libvhost-user-glib.a.p/libvhost-user-glib.c.o [62/2951] Generating trace-hw_char.h with a custom command [63/2951] Generating trace-hw_display.h with a custom command [64/2951] Generating trace-hw_display.c with a custom command [65/2951] Generating trace-hw_i2c.h with a custom command [66/2951] Generating trace-hw_i386.c with a custom command [67/2951] Generating trace-hw_i386_xen.c with a custom command [68/2951] Generating trace-net.c with a custom command [69/2951] Generating trace-hw_i386.h with a custom command [70/2951] Generating trace-hw_i386_xen.h with a custom command [71/2951] Generating trace-hw_mips.h with a custom command [72/2951] Linking static target subprojects/libvhost-user/libvhost-user-glib.a [73/2951] Generating trace-hw_input.c with a custom command [74/2951] Generating trace-hw_isa.h with a custom command [75/2951] Generating trace-hw_mem.h with a custom command [76/2951] Generating trace-hw_isa.c with a custom command [77/2951] Generating trace-hw_mem.c with a custom command [78/2951] Generating trace-hw_mips.c with a custom command [79/2951] Generating trace-hw_input.h with a custom command [80/2951] Generating trace-hw_block.h with a custom command [81/2951] Generating trace-hw_intc.c with a custom command [82/2951] Generating trace-hw_misc_macio.h with a custom command [83/2951] Generating trace-hw_ide.h with a custom command [84/2951] Generating trace-hw_misc.c with a custom command [85/2951] Generating trace-hw_misc_macio.c with a custom command [86/2951] Generating trace-hw_net_can.c with a custom command [87/2951] Generating trace-hw_nvram.h with a custom command [88/2951] Generating trace-hw_nvram.c with a custom command [89/2951] Generating trace-hw_net_can.h with a custom command [90/2951] Generating trace-hw_pci.h with a custom command [91/2951] Generating trace-hw_pci.c with a custom command [92/2951] Generating trace-hw_pci_host.c with a custom command [93/2951] Generating trace-hw_intc.h with a custom command [94/2951] Generating trace-hw_misc.h with a custom command [95/2951] Generating trace-hw_pci_host.h with a custom command [96/2951] Generating trace-hw_ppc.h with a custom command [97/2951] Generating trace-hw_ppc.c with a custom command [98/2951] Generating trace-hw_rdma.h with a custom command [99/2951] Generating trace-hw_rdma.c with a custom command [100/2951] Generating trace-hw_rdma_vmw.h with a custom command [101/2951] Generating trace-hw_rdma_vmw.c with a custom command [102/2951] Generating trace-hw_rtc.h with a custom command [103/2951] Generating trace-hw_rtc.c with a custom command [104/2951] Generating trace-hw_net.c with a custom command [105/2951] Generating trace-hw_s390x.h with a custom command [106/2951] Generating trace-hw_sd.c with a custom command [107/2951] Generating trace-hw_sparc.c with a custom command [108/2951] Generating trace-hw_sparc64.c with a custom command [109/2951] Generating trace-hw_tpm.c with a custom command [110/2951] Generating trace-hw_sd.h with a custom command [111/2951] Generating trace-hw_sparc.h with a custom command [112/2951] Generating trace-hw_ssi.c with a custom command [113/2951] Generating trace-hw_sparc64.h with a custom command [114/2951] Generating trace-hw_ssi.h with a custom command [115/2951] Generating trace-hw_timer.h with a custom command [116/2951] Generating trace-hw_timer.c with a custom command [117/2951] Generating trace-hw_tpm.h with a custom command [118/2951] Generating trace-hw_virtio.c with a custom command [119/2951] Generating trace-hw_watchdog.h with a custom command [120/2951] Generating trace-hw_watchdog.c with a custom command [121/2951] Generating trace-hw_gpio.c with a custom command [122/2951] Generating trace-net.h with a custom command [123/2951] Generating trace-hw_vfio.c with a custom command [124/2951] Generating trace-hw_xen.c with a custom command [125/2951] Generating trace-hw_gpio.h with a custom command [126/2951] Generating qemu-version.h with a custom command (wrapped by meson to capture output) [127/2951] Generating trace-hw_xen.h with a custom command [128/2951] Generating trace-softmmu.c with a custom command [129/2951] Generating trace-hw_remote.h with a custom command [130/2951] Generating trace-softmmu.h with a custom command [131/2951] Generating trace-hw_remote.c with a custom command [132/2951] Generating qemu-img-cmds.h with a custom command (wrapped by meson to capture output) [133/2951] Generating trace-accel_tcg.h with a custom command [134/2951] Generating trace-hw_net.h with a custom command [135/2951] Generating trace-hw_usb.c with a custom command [136/2951] Generating trace-ui.c with a custom command [137/2951] Generating trace-hw_vfio.h with a custom command [138/2951] Generating trace-hw_virtio.h with a custom command [139/2951] Generating trace-migration.c with a custom command [140/2951] Generating trace-ui.h with a custom command [141/2951] Generating trace-accel_tcg.c with a custom command [142/2951] Generating trace-hw_core.c with a custom command [143/2951] Generating trace-target_arm.h with a custom command [144/2951] Generating trace-target_arm.c with a custom command [145/2951] Generating trace-target_hppa.h with a custom command [146/2951] Generating trace-hw_core.h with a custom command [147/2951] Generating trace-target_hppa.c with a custom command [148/2951] Generating trace-target_i386.h with a custom command [149/2951] Generating trace-target_i386.c with a custom command [150/2951] Generating trace-target_i386_kvm.h with a custom command [151/2951] Generating trace-target_i386_kvm.c with a custom command [152/2951] Generating trace-hw_usb.h with a custom command [153/2951] Generating trace-target_mips.h with a custom command [154/2951] Generating trace-target_mips.c with a custom command [155/2951] Generating trace-target_ppc.c with a custom command [156/2951] Generating trace-target_riscv.h with a custom command [157/2951] Generating trace-target_riscv.c with a custom command [158/2951] Generating trace-target_s390x.h with a custom command [159/2951] Generating trace-target_s390x.c with a custom command [160/2951] Generating hmp-commands-info.h with a custom command (wrapped by meson to capture output) [161/2951] Generating trace-target_ppc.h with a custom command [162/2951] Generating trace-target_sparc.h with a custom command [163/2951] Generating hmp-commands.h with a custom command (wrapped by meson to capture output) [164/2951] Generating trace-target_sparc.c with a custom command [165/2951] Generating generated-tcg-tracers.h with a custom command [166/2951] Generating generated-helpers.c with a custom command [167/2951] Generating trace-migration.h with a custom command [168/2951] Generating generated-helpers-wrappers.h with a custom command [169/2951] Generating generated-helpers.h with a custom command [170/2951] Generating module_block.h with a custom command [171/2951] Generating block-gen.c with a custom command [172/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_to_i32_r_minMag.c.o [173/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_to_f32.c.o [174/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_to_i64_r_minMag.c.o [175/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_to_extF80M.c.o [176/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_roundToInt.c.o [177/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_sub.c.o [178/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_to_f16.c.o [179/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_mul.c.o [180/2951] Generating qemu-options.def with a custom command (wrapped by meson to capture output) [181/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_to_f64.c.o [182/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_mulAdd.c.o [183/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_add.c.o [184/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_div.c.o [185/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_rem.c.o [186/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_eq.c.o [187/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-neon-ls.c.inc'. [188/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-a32-uncond.c.inc'. [189/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-vfp.c.inc'. [190/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-vfp-uncond.c.inc'. [191/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-t32.c.inc'. [192/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-sve.c.inc'. [193/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-t16.c.inc'. [194/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-neon-shared.c.inc'. [195/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-m-nocp.c.inc'. [196/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-a32.c.inc'. [197/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-neon-dp.c.inc'. [198/2951] Generating trace-events-all with a custom command (wrapped by meson to capture output) [199/2951] Generating texture-blit-vert.h with a custom command (wrapped by meson to capture output) [200/2951] Generating texture-blit-frag.h with a custom command (wrapped by meson to capture output) [201/2951] Compiling C object vma.p/vma-reader.c.o FAILED: vma.p/vma-reader.c.o cc -Ivma.p -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -fdiagnostics-color=auto -pipe -Wall -Winvalid-pch -std=gnu99 -O2 -g -isystem /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/linux-headers -isystem linux-headers -iquote . -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/disas/libvixl -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/tcg/i386 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/accel/tcg -pthread -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-declaration -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wimplicit-fallthrough=2 -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-psabi -fstack-protector-strong -fPIE -MD -MQ vma.p/vma-reader.c.o -MF vma.p/vma-reader.c.o.d -o vma.p/vma-reader.c.o -c ../vma-reader.c In file included from ../vma.h:18, from ../vma-reader.c:21: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include/qapi/error.h:275:10: fatal error: qapi/qapi-types-error.h: No such file or directory 275 | #include "qapi/qapi-types-error.h" | ^~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. [202/2951] Generating texture-blit-flip-vert.h with a custom command (wrapped by meson to capture output) [203/2951] Generating input-keymap-qcode-to-sun.c.inc with a custom command (wrapped by meson to capture output) [204/2951] Generating input-keymap-usb-to-qcode.c.inc with a custom command (wrapped by meson to capture output) [205/2951] Generating input-keymap-qnum-to-qcode.c.inc with a custom command (wrapped by meson to capture output) [206/2951] Generating input-keymap-qcode-to-atset3.c.inc with a custom command (wrapped by meson to capture output) [207/2951] Generating input-keymap-xorgkbd-to-qcode.c.inc with a custom command (wrapped by meson to capture output) [208/2951] Compiling C object pbs-restore.p/pbs-restore.c.o FAILED: pbs-restore.p/pbs-restore.c.o cc -Ipbs-restore.p -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -fdiagnostics-color=auto -pipe -Wall -Winvalid-pch -std=gnu99 -O2 -g -isystem /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/linux-headers -isystem linux-headers -iquote . -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/disas/libvixl -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/tcg/i386 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/accel/tcg -pthread -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-declaration -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wimplicit-fallthrough=2 -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-psabi -fstack-protector-strong -fPIE -MD -MQ pbs-restore.p/pbs-restore.c.o -MF pbs-restore.p/pbs-restore.c.o.d -o pbs-restore.p/pbs-restore.c.o -c ../pbs-restore.c In file included from ../pbs-restore.c:24: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include/qapi/error.h:275:10: fatal error: qapi/qapi-types-error.h: No such file or directory 275 | #include "qapi/qapi-types-error.h" | ^~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. [209/2951] Generating input-keymap-win32-to-qcode.c.inc with a custom command (wrapped by meson to capture output) [210/2951] Generating input-keymap-qcode-to-linux.c.inc with a custom command (wrapped by meson to capture output) [211/2951] Generating input-keymap-xorgevdev-to-qcode.c.inc with a custom command (wrapped by meson to capture output) [212/2951] Generating input-keymap-qcode-to-atset1.c.inc with a custom command (wrapped by meson to capture output) [213/2951] Generating input-keymap-qcode-to-qnum.c.inc with a custom command (wrapped by meson to capture output) [214/2951] Generating input-keymap-qcode-to-atset2.c.inc with a custom command (wrapped by meson to capture output) [215/2951] Generating input-keymap-linux-to-qcode.c.inc with a custom command (wrapped by meson to capture output) [216/2951] Generating input-keymap-osx-to-qcode.c.inc with a custom command (wrapped by meson to capture output) [217/2951] Generating input-keymap-xorgxwin-to-qcode.c.inc with a custom command (wrapped by meson to capture output) [218/2951] Generating input-keymap-xorgxquartz-to-qcode.c.inc with a custom command (wrapped by meson to capture output) [219/2951] Compiling C object contrib/elf2dmp/elf2dmp.p/addrspace.c.o [220/2951] Compiling C object vma.p/vma.c.o FAILED: vma.p/vma.c.o cc -Ivma.p -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -fdiagnostics-color=auto -pipe -Wall -Winvalid-pch -std=gnu99 -O2 -g -isystem /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/linux-headers -isystem linux-headers -iquote . -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/disas/libvixl -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/tcg/i386 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/accel/tcg -pthread -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-declaration -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wimplicit-fallthrough=2 -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-psabi -fstack-protector-strong -fPIE -MD -MQ vma.p/vma.c.o -MF vma.p/vma.c.o.d -o vma.p/vma.c.o -c ../vma.c In file included from ../vma.h:18, from ../vma.c:17: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include/qapi/error.h:275:10: fatal error: qapi/qapi-types-error.h: No such file or directory 275 | #include "qapi/qapi-types-error.h" | ^~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. [221/2951] Generating input-keymap-atset1-to-qcode.c.inc with a custom command (wrapped by meson to capture output) [222/2951] Generating x86_64-softmmu-gdbstub-xml.c with a custom command (wrapped by meson to capture output) [223/2951] Compiling C object contrib/elf2dmp/elf2dmp.p/download.c.o [224/2951] Generating aarch64-softmmu-gdbstub-xml.c with a custom command (wrapped by meson to capture output) [225/2951] Compiling C object contrib/elf2dmp/elf2dmp.p/qemu_elf.c.o [226/2951] Generating input-keymap-x11-to-qcode.c.inc with a custom command (wrapped by meson to capture output) [227/2951] Compiling C object contrib/elf2dmp/elf2dmp.p/pdb.c.o [228/2951] Compiling C object contrib/elf2dmp/elf2dmp.p/main.c.o [229/2951] Compiling C object subprojects/libvhost-user/libvhost-user.a.p/libvhost-user.c.o [230/2951] Compiling C object contrib/ivshmem-client/ivshmem-client.p/ivshmem-client.c.o [231/2951] Generating edk2-arm-vars.fd with a custom command (wrapped by meson to capture output) [232/2951] Generating QAPI files for qemu-storage-daemon with a custom command [233/2951] Generating shared QAPI source files with a custom command [234/2951] Generating edk2-arm-code.fd with a custom command (wrapped by meson to capture output) ninja: build stopped: subcommand failed. make[3]: *** [Makefile:152: run-ninja] Error 1 make[3]: Leaving directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/build' make[2]: *** [GNUmakefile:11: all] Error 2 make[2]: Leaving directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' make[1]: *** [debian/rules:87: build-stamp] Error 2 make[1]: Leaving directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 make: *** [Makefile:36: pve-qemu-kvm_6.0.0-3_amd64.deb] Error 2 -------------- next part -------------- A non-text attachment was scrubbed... Name: OpenPGP_signature Type: application/pgp-signature Size: 236 bytes Desc: OpenPGP digital signature URL: