[PVE-User] VM Power Issue

Sivakumar SARAVANAN sivakumar.saravanan.jv.ext at valeo-siemens.com
Mon Jun 8 17:15:52 CEST 2020


Hello Mark,

Thanks for your support.

It working fine now.

Best regards

SK




On Mon, Jun 8, 2020 at 4:40 PM Mark Adams via pve-user <
pve-user at pve.proxmox.com> wrote:

>
>
>
> ---------- Forwarded message ----------
> From: Mark Adams <mark at openvs.co.uk>
> To: PVE User List <pve-user at pve.proxmox.com>
> Cc:
> Bcc:
> Date: Mon, 8 Jun 2020 15:38:48 +0100
> Subject: Re: [PVE-User] VM Power Issue
> Sivakumar - This is a "known issue" as far as I am aware, usually when you
> are allocating quite a bit of memory (although 16G is not a lot in your
> case, but maybe the server doesn't have much ram?) when starting a vm with
> a PCI device passed through to it. It also only seems to happen when you
> are nearing "peak" ram usage, so getting close to running out. It never
> happens on a fresh boot.
>
> I don't know if it has been acknowledged or even reported to redhat, or
> whether simply the timeout should be longer in proxmox.
>
> I wrote to this list about it not long ago and never received a response,
> and I have seen at least 1 forum post about it.
>
> Anyway to cut a long story short, just start it manually on the cli, which
> has no timeout. "qm showcmd VMID | bash" should start it fine. IE "qm
> showcmd 101 | bash"
>
> Regards,
> Mark
>
> On Mon, 8 Jun 2020 at 15:31, Arjen via pve-user <pve-user at pve.proxmox.com>
> wrote:
>
> >
> >
> >
> > ---------- Forwarded message ----------
> > From: Arjen <leesteken at protonmail.ch>
> > To: PVE User List <pve-user at pve.proxmox.com>
> > Cc:
> > Bcc:
> > Date: Mon, 08 Jun 2020 14:30:57 +0000
> > Subject: Re: [PVE-User] VM Power Issue
> > On Monday, June 8, 2020 10:14 AM, Sivakumar SARAVANAN <
> > sivakumar.saravanan.jv.ext at valeo-siemens.com> wrote:
> >
> > > Hello,
> > >
> > > I am not able to start the VM after adding the PCI device to VM.
> > > I can see the below error message.
> >
> > Maybe your system is very busy? Maybe it takes a while to allocate the
> > memory?
> > Maybe you could give more information about the VM configuration and your
> > PVE setup?
> >
> > Can you try running the command below from the command line of your PVE
> > host, to see if it works and how long it takes?
> > Sometimes (often memory-size related), it just works but takes longer
> than
> > the time-out.
> >
> > > TASK ERROR: start failed: command '/usr/bin/kvm -id 175 -name
> > > HIL-System096Planned -chardev
> > > 'socket,id=qmp,path=/var/run/qemu-server/175.qmp,server,nowait' -mon
> > > 'chardev=qmp,mode=control' -chardev
> > > 'socket,id=qmp-event,path=/var/run/qmeventd.sock,reconnect=5' -mon
> > > 'chardev=qmp-event,mode=control' -pidfile /var/run/qemu-server/175.pid
> > > -daemonize -smbios 'type=1,uuid=1ab2409d-4b67-4d3c-822a-7a024d05d9bf'
> > -smp
> > > '4,sockets=2,cores=2,maxcpus=4' -nodefaults -boot
> > >
> >
> 'menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg'
> > > -vnc unix:/var/run/qemu-server/175.vnc,password -no-hpet -cpu
> > >
> >
> 'host,+kvm_pv_unhalt,+kvm_pv_eoi,hv_spinlocks=0x1fff,hv_vapic,hv_time,hv_reset,hv_vpindex,hv_runtime,hv_relaxed,hv_synic,hv_stimer,hv_ipi'
> > > -m 32768 -object 'memory-backend-ram,id=ram-node0,size=16384M' -numa
> > > 'node,nodeid=0,cpus=0-1,memdev=ram-node0' -object
> > > 'memory-backend-ram,id=ram-node1,size=16384M' -numa
> > > 'node,nodeid=1,cpus=2-3,memdev=ram-node1' -device
> > > 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' -device
> > > 'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' -device
> > > 'vmgenid,guid=c98f392f-13af-43d9-b26e-ca070177f6bb' -device
> > > 'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' -device
> > > 'usb-tablet,id=tablet,bus=uhci.0,port=1' -device
> > > 'vfio-pci,host=0000:1b:00.0,id=hostpci0,bus=pci.0,addr=0x10' -device
> > > 'VGA,id=vga,bus=pci.0,addr=0x2' -chardev
> > > 'socket,path=/var/run/qemu-server/175.qga,server,nowait,id=qga0'
> -device
> > > 'virtio-serial,id=qga0,bus=pci.0,addr=0x8' -device
> > > 'virtserialport,chardev=qga0,name=org.qemu.guest_agent.0' -iscsi
> > > 'initiator-name=iqn.1993-08.org.debian:01:626ca038d6c7' -drive
> > > 'if=none,id=drive-ide2,media=cdrom,aio=threads' -device
> > > 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' -drive
> > >
> >
> 'file=/dev/zvol/SSD-Storage-PRX018/vm-175-disk-0,if=none,id=drive-virtio0,cache=writethrough,format=raw,aio=threads,detect-zeroes=on'
> > > -device
> > >
> >
> 'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100'
> > > -drive
> > >
> >
> 'file=/dev/zvol/HDD-Storage-PRX018/vm-175-disk-1,if=none,id=drive-virtio1,cache=writethrough,format=raw,aio=threads,detect-zeroes=on'
> > > -device
> > 'virtio-blk-pci,drive=drive-virtio1,id=virtio1,bus=pci.0,addr=0xb'
> > > -netdev
> > >
> >
> 'type=tap,id=net0,ifname=tap175i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown'
> > > -device
> > >
> >
> 'e1000,mac=F2:3F:4D:48:7B:68,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300'
> > > -rtc 'driftfix=slew,base=localtime' -machine 'type=pc+pve1' -global
> > > 'kvm-pit.lost_tick_policy=discard'' failed: got timeout
> > >
> > > Appreciating your suggestion.
> > >
> > > Best regards,
> > >
> > > SK
> > >
> > >
> >
> -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> > >
> > > This e-mail message is intended for the internal use of the intended
> > >
> > > recipient(s) only.
> > >
> > > The information contained herein is
> > >
> > > confidential/privileged. Its disclosure or reproduction is strictly
> > >
> > > prohibited.
> > >
> > > If you are not the intended recipient, please inform the sender
> > >
> > > immediately, do not disclose it internally or to third parties and
> > destroy
> > >
> > > it.
> > >
> > > In the course of our business relationship and for business purposes
> > >
> > > only, Valeo may need to process some of your personal data.
> > >
> > > For more
> > >
> > > information, please refer to the Valeo Data Protection Statement and
> > >
> > > Privacy notice available on Valeo.com
> > >
> > > https://www.valeo.com/en/ethics-and-compliance/#principes
> >
> > Am I the intended recipient? Otherwise, consider yourself informed
> > immediately. I apologize for disclosing this information on the same
> > mailing-list you sent the original e-mail. Valeo is not allowed to
> process
> > my personal data, according to the General Data Protection Regulation
> > (GDPR), without prior written consent. Please consider removing such
> > statements when sending email to a (public) mailing list, as it makes it
> > difficult to help you without violating your rules.
> >
> >
> >
> > ---------- Forwarded message ----------
> > From: Arjen via pve-user <pve-user at pve.proxmox.com>
> > To: PVE User List <pve-user at pve.proxmox.com>
> > Cc: Arjen <leesteken at protonmail.ch>
> > Bcc:
> > Date: Mon, 08 Jun 2020 14:30:57 +0000
> > Subject: Re: [PVE-User] VM Power Issue
> > _______________________________________________
> > pve-user mailing list
> > pve-user at pve.proxmox.com
> > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>
>
> ---------- Forwarded message ----------
> From: Mark Adams via pve-user <pve-user at pve.proxmox.com>
> To: PVE User List <pve-user at pve.proxmox.com>
> Cc: Mark Adams <mark at openvs.co.uk>
> Bcc:
> Date: Mon, 8 Jun 2020 15:38:48 +0100
> Subject: Re: [PVE-User] VM Power Issue
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>

-- 
*This e-mail message is intended for the internal use of the intended 
recipient(s) only.
The information contained herein is 
confidential/privileged. Its disclosure or reproduction is strictly 
prohibited.
If you are not the intended recipient, please inform the sender 
immediately, do not disclose it internally or to third parties and destroy 
it.

In the course of our business relationship and for business purposes 
only, Valeo may need to process some of your personal data. 
For more 
information, please refer to the Valeo Data Protection Statement and 
Privacy notice available on Valeo.com 
<https://www.valeo.com/en/ethics-and-compliance/#principes>*


More information about the pve-user mailing list