[PVE-User] Cant connect to ceph anymore

proxmox at elchaka.de proxmox at elchaka.de
Mon May 13 18:07:57 CEST 2019


So, a "bit" late... i know - but to complete this thread as "solved":

I have resolved the issue a few months ago with

Aptitude install ceph

This has found few depenedencies and resolved by himself.

It is now working since then without any issues

- Mehmet 


Am 16. September 2018 01:26:36 MESZ schrieb proxmox at elchaka.de:
>Hello Marcus,
>
>Thanks again for your attention :)
>
>Downgrade is Really a passable Way  - dont know why i didnt come to
>this conclusion by myself ^^
>
>So i tried to Downgrade via ceph-deploy install  --release Jewel <host>
>but didnt worked so i decide to remove and reinstal ceph again after
>this.
>
>So i did 
>Ceph-deploy remove ceph (dont know the exact Commands Jet...) 
>this worked but this had also removed proxmox components like
>proxmox-ve and qemu-server etc. Oo :*(
>
>Luckywise this hadnt  any effect to our Running VMs.. Puh..  
>
>So i tried to reinstall the removed proxmox components but this is
>actually Not allowed because some libaries are in use ...
>
>I guess i had to Reboot the Server in a Controlled way and then to
>instal proxmox again hopefully without loosing the actually Running VMs
>and local Storage.
>
>- Mehmet 
>
>Am 14. September 2018 08:00:17 MESZ schrieb Marcus Haarmann
><marcus.haarmann at midoco.de>:
>>Hi, 
>>
>>so the client is updated to luminous but kernel not (?) 
>>Maybe you should downgrade for the moment, as jewel clients are
>>supported. 
>>
>>Marcus Haarmann 
>>
>>
>>Von: "proxmox" <proxmox at elchaka.de> 
>>An: "pve-user" <pve-user at pve.proxmox.com> 
>>Gesendet: Donnerstag, 13. September 2018 23:59:32 
>>Betreff: Re: [PVE-User] Cant connect to ceph anymore 
>>
>>Hey Marcus, 
>>
>>Thanks for your Message. 
>>
>>Am 13. September 2018 22:58:04 MESZ schrieb Marcus Haarmann
>><marcus.haarmann at midoco.de>: 
>>>Hi, 
>>> 
>>>so you would drive a 12.2 (luminous) service with a 10.x (jewel) 
>>>client. 
>>
>>Sorry, with 
>>
>>"The last Step was to Update the ceph Client on this proxmox node, but
>>now i am Not able to connect to the ceph Storage anymore :*(" 
>>
>>I ment ive upgraded this Node to 12.2.x, too. After this i had the
>>descriped issue. 
>>
>>>Just a thought: 
>>> 
>>>Check the "ceph features" output on your server if it allows jewel 
>>>clients. 
>>>Sample output should contain a group with a jewel attribute in the 
>>>client section. 
>>
>>This is clean. All other Node are already luminous (but with PVE 5.x) 
>>
>>> 
>>>If this is not the case, try to set: 
>>>ceph osd set-require-min-compat-client jewel 
>>
>>It is already On Jewel, becouse ive upgraded from Jewel but didnt set
>>this to luminous till all Node are Running luminous fine. 
>>
>>Hope you or someone Else has Another idea why i can not See my Images
>>through the proxmox GUI anymore - and so i can not start my
>appropriate
>>vms. 
>>
>>- Mehmet 
>>
>>>(which should be default for luminous, but can be removed which leads
>
>>>to incompability) 
>>> 
>>>Check this link for details: 
>>>https://ceph.com/community/new-luminous-upgrade-complete/ 
>>> 
>>>Maybe this helps, good luck 
>>>Marcus Haarmann 
>>> 
>>> 
>>>Von: proxmox at elchaka.de 
>>>An: "pve-user" <pve-user at pve.proxmox.com> 
>>>Gesendet: Donnerstag, 13. September 2018 19:41:13 
>>>Betreff: [PVE-User] Cant connect to ceph anymore 
>>> 
>>>Hi, 
>>> 
>>>I had a proxmox 4.x Server with installed ceph Jewel (10.x) via 
>>>ceph-deploy. 
>>> 
>>>The ceph Cluster is standalone Not managed by proxmox. 
>>> 
>>>I could use this ceph Cluster without any issues and the vms working 
>>>fine. 
>>> 
>>>Now I upgraded my ceph Cluster to 12.2.x and was still able to
>connect
>>
>>>my vms via proxmox (qemu/librbd). 
>>> 
>>>The last Step was to Update the ceph Client on this proxmox node, but
>
>>>now i am Not able to connect to the ceph Storage anymore :*( 
>>> 
>>> 
>>>Actually i cannot Update the proxmox Node to 5.x because there is a 
>>>important vm Running with local Storage. 
>>> 
>>>Proxmox Show me a empty list when i want to Browse the ceph Cluster 
>>>through the gui - but i dont get any error. 
>>> 
>>>Any suggestions? 
>>> 
>>>Thanks in advise 
>>>- Mehmet 
>>>_______________________________________________ 
>>>pve-user mailing list 
>>>pve-user at pve.proxmox.com 
>>>https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user 
>>_______________________________________________ 
>>pve-user mailing list 
>>pve-user at pve.proxmox.com 
>>https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user 
>_______________________________________________
>pve-user mailing list
>pve-user at pve.proxmox.com
>https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user


More information about the pve-user mailing list