[PVE-User] Installation + datastore on (hardware raid 1) disk

DL Ford dan-pvemalinglist at dlford.io
Sat May 11 02:22:12 CEST 2019


Yes it is possible, although not directly, you have to run the install on one disk and then create a degraded RAID mirror on the other disk, move and reconfigure the installation to boot from the RAID array on the second disk and then add the original disk to the array.




DL Ford
On 5/10/2019 4:59:33 AM, Rutger Verhoeven <rutger.verhoeven at gmail.com> wrote:
Hello,

I am planning on using proxmox both personally and professionally. I just
wanted to know if it is possible to install proxmox on a 2x SSD RAID 1
setup and use the remaining storage of that RAID 1 for datastore purposes.
So installation on 32GB partition /dev/sda1 and the datastore on /dev/sda2
(as an example).

Kind regards,

Rutger.
_______________________________________________
pve-user mailing list
pve-user at pve.proxmox.com
https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user


More information about the pve-user mailing list