[PVE-User] PVE 5.4 and Intel ixgbe

Gilberto Nunes gilberto.nunes32 at gmail.com
Wed Jul 17 20:06:04 CEST 2019


So here the scenario...
The customer (which is in other city, far away from my current localtion!)
has the Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection
but the GBIC is CISCO and the DAC cable is Mikrotik...
Should CISCO GBIC incompatible with Intel card?? Or maybe the DAC cable
from Mikrotik??
---
Gilberto Nunes Ferreira

(47) 3025-5907
(47) 99676-7530 - Whatsapp / Telegram

Skype: gilberto.nunes36





Em qua, 17 de jul de 2019 às 14:53, Gilberto Nunes <
gilberto.nunes32 at gmail.com> escreveu:

> I am not sure about it, because now, after a fresh installation, even de
> enp4sf0 appears...
> This is so frustrated!
>
>
> ---
> Gilberto Nunes Ferreira
>
> (47) 3025-5907
> (47) 99676-7530 - Whatsapp / Telegram
>
> Skype: gilberto.nunes36
>
>
>
>
>
> Em qua, 17 de jul de 2019 às 14:45, Alex Chekholko via pve-user <
> pve-user at pve.proxmox.com> escreveu:
>
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Alex Chekholko <alex at calicolabs.com>
>> To: PVE User List <pve-user at pve.proxmox.com>
>> Cc:
>> Bcc:
>> Date: Wed, 17 Jul 2019 10:44:07 -0700
>> Subject: Re: [PVE-User] PVE 5.4 and Intel ixgbe
>> You can try 'modinfo ixgbe' to query your actual installed version to see
>> all the parameters it knows about.
>>
>> I see on one of my hosts
>> # modinfo ixgbe
>> filename:
>>
>> /lib/modules/4.15.0-54-generic/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe.ko
>> version:        5.1.0-k
>> ...
>> parm:           allow_unsupported_sfp:Allow unsupported and untested SFP+
>> modules on 82599-based adapters (uint)
>>
>> And you can check the exact release notes for your version to see the
>> allowed values for that parameter.
>>
>> IME, you may have some kind of incompable cable/optic anyway; see if you
>> can try a different one.
>>
>> Regards,
>> Alex
>>
>> On Wed, Jul 17, 2019 at 9:33 AM Gilberto Nunes <
>> gilberto.nunes32 at gmail.com>
>> wrote:
>>
>> > Hi there everybody!
>> >
>> > I have installed PVE 5.4 and try to up ixgbe driver for Intel 10GB
>> SFI/SPF+
>> > NIC...
>> >
>> > I already do ixgbe-options.conf with
>> >
>> > options ixgbe allow_unsupported_sfp=1
>> >
>> > But when try to load the module I still get this error:
>> >
>> > [ 170.008236] ixgbe 0000:05:00.0: failed to load because an unsupported
>> > SFP+ or QSFP module type was detected.
>> >
>> > [ 170.008262] ixgbe 0000:05:00.0: Reload the driver after installing a
>> > supported module.
>> >
>> > [ 170.022268] ixgbe 0000:05:00.1: failed to load because an unsupported
>> > SFP+ or QSFP module type was detected.
>> >
>> > [ 170.022291] ixgbe 0000:05:00.1: Reload the driver after installing a
>> > supported module.
>> >
>> > I already try to compile Intel module from scratch, but seems to failed
>> > too!
>> >
>> > Thanks for any help!
>> >
>> > lspci
>> >
>> > 08:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit
>> SFI/SFP+
>> > Network Connection (rev 01)
>> > 08:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit
>> SFI/SFP+
>> > Network Connection (rev 01)
>> >
>> >
>> > pveversion
>> >
>> > pve-manager/5.4-11/6df3d8d0 (running kernel: 4.15.18-18-pve)
>> > ---
>> > Gilberto Nunes Ferreira
>> >
>> > (47) 3025-5907
>> > (47) 99676-7530 - Whatsapp / Telegram
>> >
>> > Skype: gilberto.nunes36
>> > _______________________________________________
>> > pve-user mailing list
>> > pve-user at pve.proxmox.com
>> > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>> >
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Alex Chekholko via pve-user <pve-user at pve.proxmox.com>
>> To: PVE User List <pve-user at pve.proxmox.com>
>> Cc: Alex Chekholko <alex at calicolabs.com>
>> Bcc:
>> Date: Wed, 17 Jul 2019 10:44:07 -0700
>> Subject: Re: [PVE-User] PVE 5.4 and Intel ixgbe
>> _______________________________________________
>> pve-user mailing list
>> pve-user at pve.proxmox.com
>> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>
>


More information about the pve-user mailing list