[PVE-User] sharing zfs experience

Tonči Stipičević tonci at suma-informatika.hr
Mon Jul 8 18:50:07 CEST 2019


Hi to all,

A customer of mine runs two clusters :

1. 2node with ibm v370 san as shared strage  (hared lvm)

2.  3node cluster all nodes run zfs ...  no shared storage


Couple days ago he had an power outage and during that period of time I 
was kind a worrying how apcupsd & proxmox will handle this situation.

1. Both nodes were properly shut down but one of 2 them dies , 
independent from power outage :) but just in the same time. I booted up 
remaining node , adjusted "votes" and started all vm-s residing on the 
shared lvm storage ...  No further questions ... prox handled that correctly

2. all 3 nodes started up but the most important lxc conteiner cloud not 
start.

Reason: Job for pve-container at 104.service failed because the control 
process exited with error code. See "systemctl status 
pve-container at 104.service" and "journalctl -xe" for details. TASK ERROR: 
command 'systemctl start pve-container at 104' failed: exit code 1

Upgrading, restarting etc etc did not helped at all. The problem was 
that rootfs from this contaier  was completely empty ( it contained only 
/dev/ and /mnt/  dirs . Fortunately second mount point (aka 2nd disk) 
with 2T of data was pretty healthy and visible. So one option was to 
restore it from backup but zfs list command showed that this data set 
still holds data as much as it should (disk 0)

root at pve01-hrz-zm:~# ls -al /rpool/data/subvol-104-disk-0/
total 10
drwxr-xr-x 4 root root 4 Srp  4 14:07 .
drwxr-xr-x 9 root root 9 Srp  4 23:17 ..
drwxr-xr-x 2 root root 2 Srp  4 14:07 dev
drwxr-xr-x 3 root root 3 Srp  4 14:07 mnt

root at pve01-hrz-zm:~# zfs list
NAME                            USED  AVAIL  REFER  MOUNTPOINT
rpool                          2,15T  1,36T   104K  /rpool
rpool/data                     2,15T  1,36T   128K  /rpool/data
rpool/data/subvol-104-disk-0    751M  15,3G   751M 
/rpool/data/subvol-104-disk-0
rpool/data/subvol-104-disk-1   2,15T   894G  2,15T 
/rpool/data/subvol-104-disk-1


Interesting was that both lcx containers from this node had "empty" 
disk-0  (but the other one was not that big, it had only disk-0) and 
none of them could start.

After many tries I decided to migrate this little container to other 
just to see what will happen :  migration was successfull and starting 
up as well .  OK (true relief finally :). then I tried to make backup of 
this vm just to see what will happen. No, backup was not successfull ... 
backup archive was only 1.7KB big. Ok, let's get back to migration 
scenario. So, the final conclusion was that migration itself was not the 
solution but snapshot was the right one. Snapshot was the step that 
revived this disk-0.

So , at the end I just made snapshot of the 104-disk-0, cloned it back 
right after to 1044-disk-0 and then just change the reference in lxc 
configuration. After that lxc started successfully.


I'm very wondering why this happened but am also very happy that above 
simple steps saved my day.

Hopefully this information helps somebody that will run into same 
problem , but in the same time I truly hope that it won't happen :)


BR

Tonci Stipicevic



	
	
	



More information about the pve-user mailing list