[PVE-User] Intel Corporation Gigabit ET2 Quad Port Server Adapter

David Lawley davel at upilab.com
Wed Apr 10 17:18:07 CEST 2019


No joy, googling

cat interfaces

# network interface settings; autogenerated
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
# If you want to manage parts of the network configuration manually,
# please utilize the 'source' or 'source-directory' directives to do
# so.
# PVE will preserve these directives, but will NOT read its network
# configuration from sourced files, so do not attempt to move any of
# the PVE managed interfaces into external files!

auto lo
iface lo inet loopback

iface enp10s0f0 inet manual

iface enp10s0f1 inet manual

iface enp11s0f0 inet manual

iface enp11s0f1 inet manual

iface enp70s0f0 inet manual

iface enp70s0f1 inet manual

auto bond0
iface bond0 inet manual
         bond-slaves enp10s0f0 enp11s0f0 enp70s0f1
         bond-miimon 100
         bond-mode 802.3ad

auto vmbr0
iface vmbr0 inet static
         address  10.10.0.45
         netmask  255.255.254.0
         gateway  10.10.1.1
         bridge-ports bond0
         bridge-stp off

Arg, no rules in either hwdb.d or rules.c

lspci shows

0a:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network 
Connection (rev 01)
0a:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network 
Connection (rev 01)
0b:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network 
Connection (rev 01)
0b:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network 
Connection (rev 01)

46:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network 
Connection (rev 01)
46:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network 
Connection (rev 01)
47:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network 
Connection (rev 01)
47:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network 
Connection (rev 01)


ip address shows;


1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
group default qlen 1000
     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
     inet 127.0.0.1/8 scope host lo
        valid_lft forever preferred_lft forever
     inet6 ::1/128 scope host
        valid_lft forever preferred_lft forever
2: enp10s0f0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq 
master bond0 state UP group default qlen 1000
     link/ether 90:e2:ba:8a:8a:98 brd ff:ff:ff:ff:ff:ff
3: enp10s0f1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group 
default qlen 1000
     link/ether 90:e2:ba:8a:8a:99 brd ff:ff:ff:ff:ff:ff
4: enp11s0f0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq 
master bond0 state UP group default qlen 1000
     link/ether 90:e2:ba:8a:8a:98 brd ff:ff:ff:ff:ff:ff
5: enp11s0f1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group 
default qlen 1000
     link/ether 90:e2:ba:8a:8a:9b brd ff:ff:ff:ff:ff:ff
6: enp70s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group 
default qlen 1000
     link/ether 90:e2:ba:8a:8b:08 brd ff:ff:ff:ff:ff:ff
7: enp70s0f1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq 
master bond0 state UP group default qlen 1000
     link/ether 90:e2:ba:8a:8a:98 brd ff:ff:ff:ff:ff:ff
8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc 
noqueue master vmbr0 state UP group default qlen 1000
     link/ether 90:e2:ba:8a:8a:98 brd ff:ff:ff:ff:ff:ff
9: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state 
UP group default qlen 1000
     link/ether 90:e2:ba:8a:8a:98 brd ff:ff:ff:ff:ff:ff
     inet 10.10.0.45/23 brd 10.10.1.255 scope global vmbr0
        valid_lft forever preferred_lft forever
     inet6 fe80::92e2:baff:fe8a:8a98/64 scope link
        valid_lft forever preferred_lft forever


On 4/9/2019 10:28 AM, David Lawley wrote:
> fresh install from PVE cd, but I will review.  It did the usual 
> predictive network interface renaming.  Just not all of them
>
> Seems ok with the old kernel/firmware.  Kinda why I wanted to quickly 
> throw a standard Debian disto on it to see
>
> Just wanted to ask around while waiting on a another window of 
> opportunity to try again, few angry campers this week, have to tread 
> carefully
>
> Appreciate your comment
>
>
>
>
> On 4/9/2019 9:29 AM, Mark Schouten wrote:
>> I think udev is making them 'disappear'.
>>
>> Do you have anything in /etc/udev/rules.d/70-persisent-net ? That 
>> sometimes renames interfaces..
>>
>> -- 
>>
>> Mark Schouten <mark at tuxis.nl>
>>
>> Tuxis, Ede, https://www.tuxis.nl
>>
>> T: +31 318 200208
>>
>>
>>
>> ----- Originele bericht -----
>>
>>
>> Van: David Lawley (davel at upilab.com)
>> Datum: 09-04-2019 13:56
>> Naar: pve-user at pve.proxmox.com
>> Onderwerp: [PVE-User] Intel Corporation Gigabit ET2 Quad Port Server 
>> Adapter
>>
>>
>> Intel Corporation Gigabit ET2 Quad Port Server Adapter
>>
>>
>> Anyone using any of these?
>>
>> I have 2 per host
>>
>> Currently running  PVE3.4, but while rebuilding the server with 5.3, the
>> installation was only finding 6 of the 8 ports.
>>
>> Due to some other issues at the time I had to push the old PVE disks
>> back and abort the install.
>>
>> My next step is to try a stock Debian install and see what happens in
>> the next opportunity I get.
>>
>> Just wondering if anyone been down this path might have a word to add?
>>
>>
>>
>>
>>
>> _______________________________________________
>> pve-user mailing list
>> pve-user at pve.proxmox.com
>> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>
>>
>>
>> _______________________________________________
>> pve-user mailing list
>> pve-user at pve.proxmox.com
>> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user



More information about the pve-user mailing list