[PVE-User] ZFS Node failing to boot

Lindsay Mathieson lindsay.mathieson at gmail.com
Fri Sep 22 16:40:10 CEST 2017


I have a 4.x Proxmox node that is failing to boot today, get past the 
bios etc, then blank screen with a blinking cursor - no console output 
from the boot process at all.

- vs 4 + latest updates from no-sub repo

- Have explicitly picked the boot drive at start to ensure it using the 
right disk

- Boot disk is a 240MB Kingston SSD (no raid)


Fortunately I was about to boot the system using the rescue mode from 
the Proxmox ISO, and it running fine now, but still won't boot without 
the rescue iso. But I can access the disks and they seem ok.


I presume its some sort of grub error but I have no idea how to repair a 
zfs boot drive.


  zpool status rpool
   pool: rpool
  state: ONLINE
   scan: scrub repaired 0 in 0h6m with 0 errors on Sat Sep 23 00:36:20 2017
config:

         NAME        STATE     READ WRITE CKSUM
         rpool       ONLINE       0     0     0
           sdj2      ONLINE       0     0     0

errors: No known data errors

zfs list
NAME                                      USED  AVAIL REFER  MOUNTPOINT
rpool                                    83.4G   132G 96K  /rpool
rpool/ROOT                               1.79G   132G 96K  /rpool/ROOT
rpool/ROOT/pve-1                         1.79G   132G 1.79G  /
rpool/data                                 96K   132G 96K  /rpool/data
rpool/lizardfs                           73.0G   132G 73.0G  /lizardfs
rpool/swap                               8.50G   133G 7.49G  -



-- 
Lindsay Mathieson



More information about the pve-user mailing list