[PVE-User] Ceph over IP over Infiniband

Phil Schwarz infolist at schwarz-fr.net
Tue Dec 19 12:28:58 CET 2017


Hi,
I'm currently trying to set up a brand new home cluster :
- 5 nodes, with each :

- 1 HCA Mellanox ConnectX-2
- 1 GB Ethernet (Proxmox 5.1 Network Admin)
- 1 CX4 to CX4 cable

All together connected to a SDR Flextronics IB Switch.

This setup should back a Ceph Luminous (V12.2.2 included in proxmox
V5.1) On all nodes, I did:
- apt-get infiniband-diags
- modprobe mlx4_ib
- modprobe ib_ipoib
- modprobe ib_umad
- ifconfig ib0 IP/MASK

On two nodes (tried previously on a single on, same issue), i installed
opensm ( The switch doesn't have SM included) :
apt-get install opensm
/etc/init.d/opensm stop
/etc/init.d/opensm start
(Necessary to let the daemon create the logfiles)

I tailed the logfile and got a "Active&Running" Setup, with "SUBNET UP"

Every node is OK regardless to IB Setup :
- All ib0 are UP, using ibstat
- ibhosts and ibswitches seem to be OK

On a node :
ibping -S

On every other node :
ibping -G GID_Of_Previous_Server_Port

I got a nice pong reply on every node. Should be happy, but...
But i never went further.. Tried to ping each other. No way to get into
this (mostly probably) simple issue...


Any hint to achieve this task ??


Thanks for all
Best regards



More information about the pve-user mailing list