[PVE-User] VM Won't start

[Gilberto Nunes]

Well... Ok... Here we go....
More info below:

Server: HP Proliant with 64 Intel(R) Xeon(R) CPU X7560  @ 2.27GHz ( 4
sockets)
256 GB memory
SAS local storage with 3.2 TB

I haved others VM's with the same behaviors.
When I started the VM creation setting the configuration like CPU type to
Nehalem or even host, and set memory disck and so, created normally.
But, when I point the virtual CD/DVD to an ISO image, I get that message...
There is no special requirement to this VM... ISO is Centos 7 x64.
VM config:

bootdisk: virtio0
cores: 1
cpu: Nehalem
ide2: none,media=cdrom
memory: 4096
name: LcomBPMAppServer
net0: virtio=36:64:65:38:64:63,bridge=vmbr0
numa: 0
ostype: l26
smbios1: uuid=deb5b877-25ae-42db-913a-77815c88cc20
sockets: 1
virtio0: stg-local:108/vm-108-disk-1.qcow2,size=120G

Thanks


2016-01-13 14:14 GMT-02:00 Thomas Lamprecht <t.lamprecht at proxmox.com>:

> Hi,
>
> I didn't looked at the entire command if there is an
> error/misconfiguration, to tiresome for me.
>
> Can you please also post the VMs config file and maybe some additional
> info you have: is this VM special in any sense? did the VM never work
> (since creation) or stopped working?
>
> Further, is more information in the log? Please look in the journal at the
> time from a failed start. (journalctl)
> That info should make it easier to track down the problem and help you.
>
> cheers,
> Thomas
>
>
> On 13.01.2016 16:53, Gilberto Nunes wrote:
>
> Hello list
>
> I just set a VM like any other one here in Proxmox 4.1 with more than 16
> VM's running smootlhy
>
> However, one of them (always has The Rebel!), refused to go up.
> I get this error:
>
> Failed to create message: Input/output error
>
> TASK ERROR: start failed: command '/usr/bin/systemd-run --scope --slice
> qemu --unit 108 -p 'KillMode=none' -p 'CPUShares=1000' /usr/bin/kvm -id 108
> -chardev 'socket,id=qmp,path=/var/run/qemu-server/108.qmp,server,nowait'
> -mon 'chardev=qmp,mode=control' -vnc
> unix:/var/run/qemu-server/108.vnc,x509,password -pidfile
> /var/run/qemu-server/108.pid -daemonize -smbios
> 'type=1,uuid=deb5b877-25ae-42db-913a-77815c88cc20' -name LcomBPMAppServer
> -smp '1,sockets=1,cores=1,maxcpus=1' -nodefaults -boot
> 'menu=on,strict=on,reboot-timeout=1000' -vga cirrus -cpu
> Nehalem,+kvm_pv_unhalt,+kvm_pv_eoi,enforce -m 4096 -k pt-br -device
> 'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' -device
> 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' -device
> 'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' -device
> 'usb-tablet,id=tablet,bus=uhci.0,port=1' -device
> 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3' -iscsi
> 'initiator-name=iqn.1993-08.org.debian:01:9a3690d7aafb' -drive
> 'file=/storage/images/108/vm-108-disk-1.qcow2,if=none,id=drive-virtio0,format=qcow2,cache=none,aio=native,detect-zeroes=on'
> -device
> 'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100'
> -drive 'if=none,id=drive-ide2,media=cdrom,aio=threads' -device
> 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' -netdev
> 'type=tap,id=net0,ifname=tap108i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on'
> -device
> 'virtio-net-pci,mac=36:64:65:38:64:63,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300''
> failed: exit code 1
>
>
> Somebody  can help me with any assistance???
>
> Thanks a lot
>
> --
>
> Gilberto Ferreira
> +55 (47) 9676-7530
> Skype: gilberto.nunes36
>
>
>
> _______________________________________________
> pve-user mailing listpve-user at pve.proxmox.comhttp://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>
>
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>


-- 

Gilberto Ferreira
+55 (47) 9676-7530
Skype: gilberto.nunes36
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20160113/99a06167/attachment.htm>