[PVE-User] LVM volume not displayed in pve interface
Nicola Ferrari (#554252)
nicolafrr at yahoo.it
Thu Oct 8 08:31:59 CEST 2015
I'm using pve3.4 on 3 proliant server in conjunction with a HP P2000
HP Storage raid volumes are configured as physical disks, volume groups
are added as pve storage, and vms uses lvm volumes as disk.
I got 3 groups defined as storage in pve:
if I browse san01 and san02 content in the interface everything is fine.
But, if i browse san03 it is displayed as empty. anyway there is a vm
running that has its hd on that volume.
LVM volume (vm's disk) is correctly detected by lvdisplay and lvscan and
marked as active. vm is running.
it seems that only pve interface cannot display that volume.
san03 storage (volume group) properties (free and used space,....) are
what's happening? Any suggestion?
ACTIVE '/dev/vd03/vm-111-disk-3' [3.27 TiB] inherit
# vgdisplay vd03
--- Volume group ---
VG Name vd03
Metadata Areas 1
Metadata Sequence No 29
VG Access read/write
(volume group vd03 is defined as "san03" in pve storages)
All three cluster nodes has the same behaviour.
| Linux User #554252 |
More information about the pve-user