[PVE-User] Open vSwitch with multiple VLANs

[Sten Aus]

Hi guys and girls!

Is someone using open vSwitch (ovs) with multiple VLANs? How is your 
VM-s configured?
Let's say that on Proxmox host I have created bridge *vmbr0* (for LAN 
communication) and *vmbr1* (for Internet). *And there should be 5 VLANs 
on vmbr0.*

Do you need to give VM two network adapters - one connected to vmbr0 and 
other one to vmbr1 and then when you configure VM network interfaces, 
then you say that on eth0 (which is connected to vmbr0) there are vlans 
10, 20, 30 and 40, 50 for example.

So, for Debian an very simple example would be:
eth0.10
eth0.20
eth0.30
eth0.40
eth0.50

Right now I am using Linux bridge and VLANs are made in Proxmox host and 
VM-s get multiple ethernet adapters, resulting in Debian conf:
eth0
eth1
eth2
eth3
eth4
So, all vmbrs (vmbr10, vmbr20, vmbr30, vmbr40 and vmbr50) are connected 
to VLANs on Proxmox host and are being used in VMs and as far as I know, 
I can't connect one physical Proxmox host port (eth0) to multiple ovs 
bridges.
That means I can't leave my VMs configuration like that, is that right?

Hope someone can share his/her experience on this Open vSwitch topic!

All the best
Sten
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20150123/fea1ef57/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3227 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20150123/fea1ef57/attachment.bin>