[PVE-User] Fwd: Snapshot

Gilberto Nunes gilberto.nunes32 at gmail.com
Thu Jul 10 16:31:29 CEST 2014


yep... I just do it right now... But I need to reboot both nodes, because
qorum disk go to offline...

I will post results later... Stay tuned =)


2014-07-10 11:29 GMT-03:00 Yannis Milios <yannis.milios at gmail.com>:

> No, they do not.
> Follow these steps from the wiki:
>
> LVM Groups with Network Backing
>
> In this configuration, network block devices (iSCSI targets) are used as
> the physical volumes for LVM logical volume storage. This is a two step
> procedure and can be fully configured via the web interface.
>
>    1. First, add the iSCSI target. (On some iSCSI targets you need to add
>    the IQN of the Proxmox VE server to allow access.)
>       - Click 'Add iSCSI Target' on the Storage list
>       - As storage name use whatever you want but take care, this name
>       cannot be changed later.
>       - Give the 'Portal' IP address or servername and scan for unused
>       targets
>       - disable 'use LUNs direcly'
>       - Click save
>    2. Second, add LVM group on this target.
>       - Click 'Add LVM Group' on the Storage list
>       - As storage name use whatever you want but take care, this name
>       cannot be changed later.
>       - For 'Base Storage', use the drop down menu to select the
>       previously defined iSCSI target.
>       - For 'Base Volume' select a LUN
>       - For 'Volume Group Name' give a unique name (this name cannot be
>       changed later).
>       - Enable shared use (recommended)
>       - Click save
>
>


-- 
Gilberto Ferreira
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://pve.proxmox.com/pipermail/pve-user/attachments/20140710/8c2426fe/attachment-0015.html>


More information about the pve-user mailing list