[PVE-User] Fwd: Snapshot

[Gilberto Nunes]

I don't know... Perhaps I misconfigurate something... But I tried with
another iSCSI Target Software
( Iscsi Enterprise Target - IET ) but still have the same behavior: I
cannot change disk format...




2014-07-10 11:54 GMT-03:00 Gilberto Nunes <gilberto.nunes32 at gmail.com>:

> Hi Yannis....
>
> I have follow all those steps that you pointed to me on your last reply...
> Well, in fact, I already do it in other physical server before, but
> without success....
>
> When I attempt to create a VM, I cannot choose Format to my VM disk, as
> you can see bellow:
>
>
>
>
> Some other advices??
>
> Thank you
>
>
> 2014-07-10 11:31 GMT-03:00 Gilberto Nunes <gilberto.nunes32 at gmail.com>:
>
> yep... I just do it right now... But I need to reboot both nodes, because
>> qorum disk go to offline...
>>
>> I will post results later... Stay tuned =)
>>
>>
>> 2014-07-10 11:29 GMT-03:00 Yannis Milios <yannis.milios at gmail.com>:
>>
>> No, they do not.
>>> Follow these steps from the wiki:
>>>
>>> LVM Groups with Network Backing
>>>
>>> In this configuration, network block devices (iSCSI targets) are used as
>>> the physical volumes for LVM logical volume storage. This is a two step
>>> procedure and can be fully configured via the web interface.
>>>
>>>    1. First, add the iSCSI target. (On some iSCSI targets you need to
>>>    add the IQN of the Proxmox VE server to allow access.)
>>>       - Click 'Add iSCSI Target' on the Storage list
>>>       - As storage name use whatever you want but take care, this name
>>>       cannot be changed later.
>>>       - Give the 'Portal' IP address or servername and scan for unused
>>>       targets
>>>       - disable 'use LUNs direcly'
>>>       - Click save
>>>    2. Second, add LVM group on this target.
>>>       - Click 'Add LVM Group' on the Storage list
>>>       - As storage name use whatever you want but take care, this name
>>>       cannot be changed later.
>>>       - For 'Base Storage', use the drop down menu to select the
>>>       previously defined iSCSI target.
>>>       - For 'Base Volume' select a LUN
>>>       - For 'Volume Group Name' give a unique name (this name cannot be
>>>       changed later).
>>>       - Enable shared use (recommended)
>>>       - Click save
>>>
>>>
>>
>>
>> --
>> Gilberto Ferreira
>>
>
>
>
> --
> Gilberto Ferreira
>



-- 
Gilberto Ferreira
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20140710/f4a87244/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: snap05.png
Type: image/png
Size: 31109 bytes
Desc: not available
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20140710/f4a87244/attachment.png>