[PVE-User] napp-it and nsf
andrea.thompson at lextecny.com
Fri May 17 06:55:22 CEST 2013
Michael Rasmussen <mir at ...> writes:
> On Wed, 1 May 2013 13:38:24 -0300
> Fábio Rabelo <fabio at ...> wrote:
> > I just do not know wherre to go ....
> Was does the following give as output (from a client on your network):
> rpcinfo IP_of_napp-it
Then followed by
aptitude install dkms pve-headers-$(uname -r)
this is needed for dkms to work:
ln -s /lib/modules/2.6.32-10-pve/build /lib/modules/2.6.32-10-pve/source
Maybe someone who knows how to write a patch could submit one and suggest
this be done when kernel is upgraded? Otherwise I think when the Proxmox
kernel upgrades, dkms build may fail if this is not done [ using new
then install zfs
aptitude install ubuntu-zfs
finally make sure that zfs is started at system boot, edit /etc/default/zfs
# ZoL userland configuration.
# Run `zfs mount -a` during system start?
# This should be 'no' if zfs-mountall or a systemd generator is available.
currently this needs to be done when a kernel upgrade occurs.
126.96.36.199 upgrade from 188.8.131.52 did before reboot [ for you would need
to change 2.6.32-11-pve if different version.
aptitude install pve-headers-2.6.32-11-pve
ln -s /lib/modules/2.6.32-11-pve/build /lib/modules/2.6.32-11-pve/source
this will force modules to be built ( there is probably a better way to
do this , so correct this if you know how to make dkms do the build ).
aptitude reinstall spl-dkms zfs-dkms
aptitude install build-essential gawk alien fakeroot zlib1g-dev uuid
uuid-dev libssl-dev parted pve-headers-$(uname -r)
get make and install spl
git clone https://github.com/zfsonlinux/spl.git
dpkg -i *.deb
get make and install zfs
git clone https://github.com/zfsonlinux/zfs.git
dpkg -i *.deb
make sure module can load
install debs does not do this:
update-rc.d zfs defaults
note , the deb files made above can be used to install zfs on another
if there is a pre existing zfs pool then simply use the next line to
recover it. this can happen if you re-install proxmox and have zfs disks
If there is a need or want I could set up a repository with pre build
debs. Just send an email .
Creating Pools and Filesystems
use raidz2 or mirror in main data systems.
Create a raidz pool named “tank”
zpool create -f -o ashift=12 tank raidz /dev/sda /dev/sdb /dev/sdc
/dev/sdd /dev/sde /dev/sdf /dev/sdg /dev/sdh
note this happened to 2 or 3 disks the 1-st time. these were disks from
a 3-ware raid.
More information about the pve-user