[PVE-User] Problem when upgrade from proxmox 2.3 to proxmox 3.0

[tony ha]

Hi,

Thank you for your time. I changed the boot order to make Debian boot to
kernel 2.6.32-20-pve (/etc/default/grub). Everything seem ok :) .

#pveversion -v
pve-manager: 3.0-20 (pve-manager/3.0/0428106c)
running kernel: 2.6.32-20-pve
proxmox-ve-2.6.32: 3.0-100
pve-kernel-2.6.32-20-pve: 2.6.32-100
pve-kernel-2.6.32-19-pve: 2.6.32-96
lvm2: 2.02.95-pve3
clvm: 2.02.95-pve3
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-1
pve-cluster: 3.0-4
qemu-server: 3.0-15
pve-firmware: 1.0-22
libpve-common-perl: 3.0-4
libpve-access-control: 3.0-4
libpve-storage-perl: 3.0-6
vncterm: 1.1-3
vzctl: 4.0-1pve3
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-12
ksm-control-daemon: 1.1-1


On Sat, Jun 8, 2013 at 1:19 AM, Lex Rivera <me at lex.io> wrote:

> **
> 3.2.0-4 is debian kernel, not proxmox. You probably should reboot again,
> choose -pve kernel and boot with it, if any available, otherwise you can't
> use openvz (and probably some other features which available in
> proxmox-only kernel). If no -pve kernel available, you probably need to
> upgrade your grub config.
>
>
> On Fri, Jun 7, 2013, at 10:10 AM, tony ha wrote:
>
> Hi,
>
> I follow link http://pve.proxmox.com/wiki/Upgrade_from_2.3_to_3.0 for
> upgrade my proxmox 2.3 to new version 3.0. But when i reboot and type
> "uname -r" command, it show "3.2.0-4-amd64". Is this correct kernel ? With
> kernel 3.2.0-4-amd64, i can start my VM. Everything seem ok.
>
> When I type "pveversion -v" command:
> pve-manager: 3.0-20 (pve-manager/3.0/0428106c)
> running kernel: 3.2.0-4-amd64
> proxmox-ve-2.6.32: 3.0-100
> pve-kernel-2.6.32-20-pve: 2.6.32-100
> pve-kernel-2.6.32-19-pve: 2.6.32-96
> lvm2: 2.02.95-pve3
> clvm: 2.02.95-pve3
> corosync-pve: 1.4.5-1
> openais-pve: 1.1.4-3
> libqb0: 0.11.1-2
> redhat-cluster-pve: 3.2.0-2
> resource-agents-pve: 3.9.2-4
> fence-agents-pve: 4.0.0-1
> pve-cluster: 3.0-4
> qemu-server: 3.0-15
> pve-firmware: 1.0-22
> libpve-common-perl: 3.0-4
> libpve-access-control: 3.0-4
> libpve-storage-perl: 3.0-6
> vncterm: 1.1-3
> vzctl: 4.0-1pve3
> vzprocps: 2.0.11-2
> vzquota: 3.1-2
> pve-qemu-kvm: 1.4-12
> ksm-control-daemon: 1.1-1
>
> What mistake am i making ? Would someone please advise on this ?
>
> Thanks in advance.
>
> Regards,
> vynt
>  *_______________________________________________*
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20130608/27d276ed/attachment.htm>