[PVE-User] Problems with running Pve under the New Hetzner Rootserver Generation with Haswell

[Christain Blaich]

Hey,

I got a new RootServer from the new Hetzner Generation called EX40
http://www.hetzner.de/hosting/produktmatrix/rootserver-produktmatrix-ex
Unfortunately  the Server does not start with 2.6.32-20-pve stable.
2.6.32-21-pve dev is running but hangs after a short period of time, no
log entries. After a reset the server comes up again.
2.6.32-22-pve dev same like 21.

model name    : Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
root at Debian-70-wheezy-64-minimal ~ # lspci
00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated
Graphics Controller (rev 06)
00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host
Controller (rev 04)
00:16.0 Communication controller: Intel Corporation Lynx Point MEI
Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host
Controller #2 (rev 04)
00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port
#1 (rev d4)
00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)
00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host
Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA
Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04)
02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI
Bridge (rev 03)
03:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet
Controller (rev 05)

Hw should be ok and is tested. Other useres are fighting with the same
errors.
See http://forum.hetzner.de/wbb2/thread.php?threadid=20291

Any Ideas ?

Thx, chris
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20130718/c557b741/attachment.htm>