[PVE-User] SPAN port on bridge - not working in 3.x

[Lex Rivera]

Leftovers. Previous network card required that tuning, otherwise
mirrored frames would be duplicated.
Thanks for notifying.

On Mon, Jul 8, 2013, at 09:10 AM, Alexandre Kouznetsov wrote:
> Hello.
> 
> El 08/07/13 08:44, Lex Rivera escribió:
> > Well silly me. brctl location changed from /usr/sbin in squeeze to just
> > /sbin in wheezy. Sorry for bothering, it's working now :)
> >
> > On Mon, Jul 8, 2013, at 06:32 AM, Lex Rivera wrote:
> >> Hello.
> >> I have machine which have span port from physical switch for VMs.
> >>
> >> Interface config:
> >> ----
> >> auto eth3
> >> allow-hotplug eth3
> >> iface eth3 inet manual
> >>          up /sbin/ifconfig $IFACE up
> >>          downp /sbin/ifconfig $IFACE down
> >>
> >>          post-up ethtool -K eth4 sg off
> >>          post-up ethtool -K eth4 tso off
> >>          post-up ethtool -K eth4 gso off
> >>          post-up ethtool -K eth4 gro off
> >>          post-up ethtool -K eth4 lro off
> >>          post-up ethtool -K eth4 tco off
> 
> Good it was solved.
> Why are you running ethtool on eth4, while configuring eth3 ?
> 
> -- 
> Alexandre Kouznetsov
> 
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user