[PVE-User] Problems with running Pve under the New Hetzner Rootserver Generation with Haswell
marc at moonscoop-fan.com
Thu Aug 15 13:45:41 CEST 2013
I'm trying the solution in adding the following parameters to the kernel
boot line :
nomodeset enable_mtrr_cleanup mtrr_spar_reg_nr=1 mtrr_gran_size=4M
Will see if that fixes my problem.
Le 15/08/2013 12:18, Konstantin Tokar a écrit :
> ex40 has a lot of reports of problems, so it can not be used.
> As example,
> Hello laurentd, I'm sorry to hear about the issues you are having
> with our new EX40 server. Thank you for posting in this thread and
> thank you for the tone of your post, it's quite refreshing.
> We have gotten feedback from a small group of clients with similar
> problems as yours. Our preliminary analysis has indicated that there
> seems to be a compatibility issue with a certain shipment of memory
> The RAM modules we use are officially listed by the Manufacturer as
> being compatible with the Motherboard. This is also something we
> tested rigorously before offering the servers, and we found no
> problems. However, since then we have gotten a batch of (the same)
> modules that use a different memory die, and this is apparently what
> is causing problems. We are in in contact with both MSI and Kingston
> to identify these modules and to resolve this issue.
> MSI has been able to provide us with a BIOS update that should
> resolve the problem. You mentioned a BIOS update was already done,
> but it could be that that update was of a previous version. Please
> get in touch with our technicians and ask them to check the BIOS
> again, to make sure you have received the most up to date version.
> С уважением,
> Константин Токар
> ФГУП "Морсвязьспутник"
> 7 (495) 967-18-50 доб.528<mailto:Konstantin at tokar.ru>
> 2013/8/15 Marc <marc at moonscoop-fan.com <mailto:marc at moonscoop-fan.com>>
> Hi there,
> I have the same problem, I have to reboot electrically the server almost
> every day (two times today already).
> I have nothing in the logs, the server just hangs.
> Has a solution been found ?
> Le 27/07/2013 14:26, Amand Tihon a écrit :
> > Hi,
> > Has a solution or workaround been found ? I'm also seeing my EX40
> hanging, but
> > I don't have access to the hetzner forum yet (my account must still be
> > activated).
> > Thanks.
> > Amand.
> > Le jeudi 18 juillet 2013 16:05:09 a écrit :
> >> Hi Martin,
> >> same Problem. 2.6.32-22-pve is running but hangs after a short
> period of
> >> time, no log entries. After a reset the server comes up again.
> >> I've no idea if a installation is impossible or not, we're using
> >> on the base. Based on this tut:
> >> http://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Wheezy
> >> chris
> >> Am 18.07.13 15:06, schrieb Martin Maurer:
> >>> Pls test with latest 2.6.32-22 kernel, see
> >>> on-1225v3-X10SLM-F-Supermicro
> >>> Martin
> >>> *From:*pve-user-bounces at pve.proxmox.com <http://pve.proxmox.com>
> >>> [mailto:pve-user-bounces <mailto:pve-user-bounces> at
> pve.proxmox.com <http://pve.proxmox.com>] *On Behalf Of *Christain
> >>> Blaich *Sent:* Donnerstag, 18. Juli 2013 11:33
> >>> *To:* pve-user at pve.proxmox.com <http://pve.proxmox.com>
> >>> *Subject:* [PVE-User] Problems with running Pve under the New
> >>> Rootserver Generation with Haswell
> >>> Hey,
> >>> I got a new RootServer from the new Hetzner Generation called EX40
> >>> Unfortunately the Server does not start with 2.6.32-20-pve stable.
> >>> 2.6.32-21-pve dev is running but hangs after a short period of time,
> >>> no log entries. After a reset the server comes up again.
> >>> 2.6.32-22-pve dev same like 21.
> >>> model name : Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
> >>> root at Debian-70-wheezy-64-minimal ~ # lspci
> >>> 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller
> (rev 06)
> >>> 00:02.0 VGA compatible controller: Intel Corporation Haswell
> >>> Integrated Graphics Controller (rev 06)
> >>> 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host
> >>> Controller (rev 04)
> >>> 00:16.0 Communication controller: Intel Corporation Lynx Point MEI
> >>> Controller #1 (rev 04)
> >>> 00:1a.0 USB controller: Intel Corporation Lynx Point USB
> Enhanced Host
> >>> Controller #2 (rev 04)
> >>> 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express
> Root Port
> >>> #1 (rev d4)
> >>> 00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)
> >>> 00:1d.0 USB controller: Intel Corporation Lynx Point USB
> Enhanced Host
> >>> Controller #1 (rev 04)
> >>> 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller
> (rev 04)
> >>> 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA
> >>> Controller 1 [AHCI mode] (rev 04)
> >>> 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller
> (rev 04)
> >>> 02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI
> >>> Bridge (rev 03)
> >>> 03:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit
> >>> Ethernet Controller (rev 05)
> >>> Hw should be ok and is tested. Other useres are fighting with
> the same
> >>> errors.
> >>> See http://forum.hetzner.de/wbb2/thread.php?threadid=20291
> >>> Any Ideas ?
> >>> Thx, chris
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL:
> >> tachment.html>
> > _______________________________________________
> > pve-user mailing list
> > pve-user at pve.proxmox.com <mailto:pve-user at pve.proxmox.com>
> > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> pve-user mailing list
> pve-user at pve.proxmox.com <mailto:pve-user at pve.proxmox.com>
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 4258 bytes
Desc: Signature cryptographique S/MIME
More information about the pve-user