[PVE-User] Adding a second interface to ProxMox 2.1

Dietmar Maurer dietmar at proxmox.com
Sat Sep 29 08:15:54 CEST 2012

There is no need for an IP

From: pve-user-bounces at pve.proxmox.com [mailto:pve-user-bounces at pve.proxmox.com] On Behalf Of Fábio Rabelo
Sent: Freitag, 28. September 2012 19:44
To: Bill Harris
Cc: pve-user at pve.proxmox.com
Subject: Re: [PVE-User] Adding a second interface to ProxMox 2.1

The static IPs are missing in the config, if you specify the network are static ( iface vmbr1 inet static ) then you must put it on the config file .

Fábio Rabelo

2012/9/28 Bill Harris <savoy9020 at gmail.com<mailto:savoy9020 at gmail.com>>

I've got  a 2-node cluster working fine.  But I need to add another
interface to put containers up on another subnet..

Tried to follow the wiki on adding a second interface (eth1) as vmbr1,
but didn't quite work as expected..

The second interface need not be visible on the host node, just the vm's (preferable)
and the vm's on the first bridge are working fine.

Current configuration with eth0:

auto lo
iface lo inet loopback

auto vmbr0
iface vmbr0 inet static
        bridge_ports eth0
        bridge_stp off
        bridge_fd 0

I want to add a second virtual interface, on the other physical interface (eth1)
such as:

auto vmbr1
iface vmbr1 inet static
        bridge_ports eth1
        bridge_stp off
        bridge_fd 0

Is this the correct  method?


pve-user mailing list
pve-user at pve.proxmox.com<mailto:pve-user at pve.proxmox.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20120929/dee83f86/attachment.htm>

More information about the pve-user mailing list