[PVE-User] Adding a second interface to ProxMox 2.1

[Fábio Rabelo]

The static IPs are missing in the config, if you specify the network are
static ( iface vmbr1 inet static ) then you must put it on the config file .


Fábio Rabelo



2012/9/28 Bill Harris <savoy9020 at gmail.com>

> Hello,
>
> I've got  a 2-node cluster working fine.  But I need to add another
> interface to put containers up on another subnet..
>
> Tried to follow the wiki on adding a second interface (eth1) as vmbr1,
> but didn't quite work as expected..
>
> The second interface need not be visible on the host node, just the vm's
> (preferable)
> and the vm's on the first bridge are working fine.
>
>
> Current configuration with eth0:
>
> auto lo
> iface lo inet loopback
>
> auto vmbr0
> iface vmbr0 inet static
>         address 172.25.96.12
>         netmask 255.255.255.224
>         gateway 172.25.96.1
>         bridge_ports eth0
>         bridge_stp off
>         bridge_fd 0
>
> I want to add a second virtual interface, on the other physical interface
> (eth1)
> such as:
>
> auto vmbr1
> iface vmbr1 inet static
>         bridge_ports eth1
>         bridge_stp off
>         bridge_fd 0
>
> Is this the correct  method?
>
> Bill
>
>
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20120928/433ce19f/attachment.htm>