[PVE-User] more subnet on same bridge
flavio.stanchina at ies.it
Thu Mar 29 13:01:26 CEST 2012
Marco Vaschetto wrote:
> anybody have try to configure different subnet on the same bridge
> between two node?
> For example,
> on the two server node vmbr1 is setup without any ip and is working
> VM 1 - IP 192.168.0.1 - server node A
> VM2 - IP 192.168.0.2 - server node B
> VM3 - IP 172.16.0.1 - server node A
> VM4 - IP 172.16.0.2 - server node B
> All VM's the virtual ETH setup with on vmbr1.
> I think this will work fine, [...]
Should work just fine if the rest of your network is properly set up,
but it's not very useful because the node administrator(s) -- or a bad
guy that breaks into the node(s) -- can easily reconfigure the network
interfaces as they please. If you're doing this to partition the network
for security reasons, set up another vmbr interface on a separate VLAN.
Informatica e Servizi
Trento - Italy
More information about the pve-user