[PVE-User] Problem proxmox 2.0 to forward vmbr1 to eth0, eth1, eth2 VM

Maykel Franco Hernández maykel at maykel.sytes.net
Mon Mar 26 15:35:01 CEST 2012


 

El 2012-03-26 15:30, Giuliano Natali (Diaolin) escribió: 

> Maykel
Franco Hernández wrote:
> 
>> I assigned the same network to vmbr1,
vmbr2 and vmbr3 for the testing. Instead, I configured de vmbr2 and
vmbr3 with WAN IP addresses and the pings OK. You can do it internally,
but a physical card or vmbr3 vmbr2 that has no cable connected, it
should not return the ICMP. You agree with that?
> 
> I agree but the
Linux stack is not working in this manner...
> 
> The IP address is
assigned to the stack and not to the card...
> 
> It seems to be
assigned to the card but the kernel itself owns the address
> 
>
Diaolin
> 
> _______________________________________________
> pve-user
mailing list
>
pve-user at pve.proxmox.comhttp://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

I
agree but I If I install debian without Proxmox, and the interface eth0
assigned ip, ip eth1, eth2 ip, I'm sure the ping, it responds with a
different mac.

And the proxmox no.

Thanks

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://pve.proxmox.com/pipermail/pve-user/attachments/20120326/27e56a9d/attachment-0014.html>


More information about the pve-user mailing list